Need Help: Paint
#1
Need Help: Paint
Hi fellows, i need some urgent help with the paint job on my 05 NBP.
Someone scratches my car from the rear fender to the front passenger door couple months ago. Suck that i wasn't there when it happened. I used plasti dip to cover it up during the winter so it wouldn't look so bad and finally gotten a chance to work on it over weekend since the it's getting warmer.
I probably wasn't thinking but use the brake cleaner to spray on the plastidip trying to get it off before the buffing. The spots that i sprayed out dried out immediately and turned into some kind of white rash. I was panic and tried to remove the rash using the scratch remover, paint polisher and even toothpaste. but none of them works and right now it just looks very bad. i was suspecting the brake cleaner damaged the top layer to the clear coat, but while i ran my finger through it, it felt like the rash was sitting on top of the paint.
Does anyone have any experience how can i fix it or do i have to repaint the two doors? Thanks
I did not take any pictures but found a picture online that looks similar to it.
Someone scratches my car from the rear fender to the front passenger door couple months ago. Suck that i wasn't there when it happened. I used plasti dip to cover it up during the winter so it wouldn't look so bad and finally gotten a chance to work on it over weekend since the it's getting warmer.
I probably wasn't thinking but use the brake cleaner to spray on the plastidip trying to get it off before the buffing. The spots that i sprayed out dried out immediately and turned into some kind of white rash. I was panic and tried to remove the rash using the scratch remover, paint polisher and even toothpaste. but none of them works and right now it just looks very bad. i was suspecting the brake cleaner damaged the top layer to the clear coat, but while i ran my finger through it, it felt like the rash was sitting on top of the paint.
Does anyone have any experience how can i fix it or do i have to repaint the two doors? Thanks
I did not take any pictures but found a picture online that looks similar to it.
#3
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
You're trolling.
There's no way someone would do that.
from the plastidip to cover the keying to the brake cleaner to take off the plastidip.
It does suck that you didn't wax your car though...and that the sun eventually ate through the clear coat.
If you rubbed it off, it wouldn't be shaped like that.
There's no way someone would do that.
from the plastidip to cover the keying to the brake cleaner to take off the plastidip.
It does suck that you didn't wax your car though...and that the sun eventually ate through the clear coat.
If you rubbed it off, it wouldn't be shaped like that.
#4
Race Director
iTrader: (1)
Lol
That'll buff right out dude. Just keep rubbing until you see metal.
That'll buff right out dude. Just keep rubbing until you see metal.
#5
Registered Bunny
You're trolling.
There's no way someone would do that.
from the plastidip to cover the keying to the brake cleaner to take off the plastidip.
It does suck that you didn't wax your car though...and that the sun eventually ate through the clear coat.
If you rubbed it off, it wouldn't be shaped like that.
There's no way someone would do that.
from the plastidip to cover the keying to the brake cleaner to take off the plastidip.
It does suck that you didn't wax your car though...and that the sun eventually ate through the clear coat.
If you rubbed it off, it wouldn't be shaped like that.
#6
Race Director
iTrader: (1)
Hell, where on the TL are the panel gaps that large?!?
Oh, door, I'm an idiot.
Oh, door, I'm an idiot.
Trending Topics
#8
Race Director
iTrader: (1)
#12
Race Director
iTrader: (1)
Of course you wood. Damn Florida ethnicks.
#15
iWhine S/C 6MT TL
iTrader: (1)
Plasti-dip
This thread ring a bell to you OP?
https://acurazine.com/forums/third-g...cident-862712/
The clear coat is toast. Not sure if it was because that area was painted due to a previous accident, or lack of proper paint care. Consult a professional detailer or body shop for the next step.
This thread ring a bell to you OP?
https://acurazine.com/forums/third-g...cident-862712/
The clear coat is toast. Not sure if it was because that area was painted due to a previous accident, or lack of proper paint care. Consult a professional detailer or body shop for the next step.
#16
Senior Moderator
kill it with fire.. that poor NBP is ruined...
then, buy this one: https://acurazine.com/forums/member-...ion-fl-944221/
then, buy this one: https://acurazine.com/forums/member-...ion-fl-944221/
The following users liked this post:
rockstar143 (04-18-2016)
#17
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
Guize, reading comprehension please. That was just a picture he found that sorta looks like what he said happened.
Try not to get too hung up on the picture not looking exactly like the story (There are far too many other things to focus on instead).
Try not to get too hung up on the picture not looking exactly like the story (There are far too many other things to focus on instead).
#18
Race Director
iTrader: (1)
#21
Senior Moderator
why wouldn't you take pictures of your actual damage...
#22
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
You should try to get pictures. The internetizens can help more when they can see the real problem. Like how not every headache is Lupus according to WebMD.
Can you phone the panel pic? So that internet?
Can you phone the panel pic? So that internet?
The following users liked this post:
BreezyTL (04-19-2016)
#23
Race Director
iTrader: (1)
#26
Team Owner
I only have one response to this:
#27
Team Owner
Did you guys see the secret message in his user name? "IRACE". The paint looks like that because he was driving so fast. Kind of like when a shuttle re-enters Earth's atmosphere. Extreme frictional forces caused by wind drag caused the paint to heat up and fry. Brotha's gotta slow down!
Thread
Thread Starter
Forum
Replies
Last Post
projektvertx
2G RL (2005-2012)
7
03-20-2016 09:21 AM