CLOSED: CL 6 speed Rear Motor Mount cls
#1
8th Gear
Thread Starter
CL 6 speed Rear Motor Mount cls
Category: Accessories
Price: $50
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): CL 2G, TL 3G, TL 2G, Type-S Model
Location (State/Prov/Terr): FL
Item Condition: Used
#5
8th Gear
Thread Starter
Part Received
the whole point of replacing this - i was trying to get rid of the rocking or bucking, when shifting 1st 2nd 3rd. i am at 150k, and i was sure that mine was broken. And honda wants $750 plus for it50810-S3M-A01.
So Richard was nice enough to sell me a used one\/
So Richard was nice enough to sell me a used one\/
#6
8th Gear
Thread Starter
So last weekend i got around to replacing my older one\/
You'd think by looking at it, "not much difference". But it was sagging a Lot.
the sag made the arch at the bottom of the rubber, almost flat / straight across.
But i took this picture a week after removal, so the sag has recovered some.
You'd think by looking at it, "not much difference". But it was sagging a Lot.
the sag made the arch at the bottom of the rubber, almost flat / straight across.
But i took this picture a week after removal, so the sag has recovered some.
Trending Topics
#8
8th Gear
Thread Starter
The Verdict
So - the difference...... slightly better.
The bucking is still there, just not as bad.
Would i do it again? hmmmmm
one issue, is the dust cover, and the hard to reach location of this mount, it makes it impossible to visually inspect. So you've got to have something to replace it with, in case it is bad. And yes, it is a bitch to replace.
Thanks again Richard
(close)
The bucking is still there, just not as bad.
Would i do it again? hmmmmm
one issue, is the dust cover, and the hard to reach location of this mount, it makes it impossible to visually inspect. So you've got to have something to replace it with, in case it is bad. And yes, it is a bitch to replace.
Thanks again Richard
(close)
Thread
Thread Starter
Forum
Replies
Last Post