Ventureshield headlight film kit for 2011 TSX
#1
Ventureshield headlight film kit for 2011 TSX
I had Ventureshield protective films installed at the front bumper, partial hood, and headlights of my 2011 TSX. The installer did a so-so job though he was rated pretty highly in Yelp. I had him replaced the films on the headlights already and the films looked worse after they cured. I don't want to waste my time to deal with him anymore.
Does anyone know where I can order Ventureshield headlight protective film kit for 2011 TSX that protect the entire headlight online? I can only find Ventureshield headlight protective film kit for 2010 TSX that protect only the front of the headlight in eBay.
Thanks.
Does anyone know where I can order Ventureshield headlight protective film kit for 2011 TSX that protect the entire headlight online? I can only find Ventureshield headlight protective film kit for 2010 TSX that protect only the front of the headlight in eBay.
Thanks.
#2
Instructor
Venture shield is pretty much the bottom of the barrel in paint protection film IMHO, DON'T LOSE YOUR WARRANTY CARD. And watch out for bug stains. I'm in the business I wouldn't use that stuff if it was free. Send me a PM, I can find somebody close to you that knows what they are doing.
http://www.tintdude.com/forum/index.php?showtopic=64787
http://www.tintdude.com/forum/index.php?showtopic=64787
Last edited by Speed2000; 08-10-2011 at 06:45 AM.
#3
I didn't even get a Ventureshield warranty card from the installer. The installer told me that his receipt was good enough for warranty at any Ventureshield installer. At this point, I am looking at replacing the films on one of the headlights myself. Otherwise, it would cost too much.
#4
Instructor
http://video.sacramento.cbslocal.com...l&rnd=96596547
you can find a good installer here:
http://www.xpel.com/
you can find a good installer here:
http://www.xpel.com/
#5
10th Gear
Join Date: Apr 2012
Location: Hinesburg, VT
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Xpel is easy to DIY
I installed the Xpel film on my wife's '08 Subaru and they looked as good as new 4 years later. No yellowing or fogging. I don't know where they rank in quality within their industry, but I think they were great.
#6
Карты убийцы
Please correct if wrong... the eventual fogging and hazing of the headlamp covers is due from exposure from sunlight. Yes? The bugs aren't going to fade them.
So if you don't have a garage to keep the lenses out of the sun as much as possible, a real cheap solution would be to take an old blanket and lay it over the front of the car.
So if you don't have a garage to keep the lenses out of the sun as much as possible, a real cheap solution would be to take an old blanket and lay it over the front of the car.
#7
Summer is Coming
I had a Venture Tape clear bra on my 06 TSX and will never buy that brand again. It is crap and has now clouded twice. I'm on my 2nd one. Have bug stains too. Crap Crap Crap.
Thread
Thread Starter
Forum
Replies
Last Post
cycdaniel
1G TSX Performance Parts & Modifications
8
12-17-2019 10:58 AM
Oakes
Wash & Wax
10
10-12-2015 11:17 AM
prox
5G TLX Problems & Fixes
6
09-01-2015 02:03 AM
2010, 2011, acura, acurazine, acurazineheadlight, adjust, film, headlight, headlights, kit, protective, tl, tsx, ventureshield, warranty