Description:

Hello everyone, the wife decided the coilover kit was too low for her so it is now up for sale. 

This is a JVR coilover kit (Same as SF Racing) and includes the front camber plate option along with custom Swift springs. The springs were swapped out to a lower spring rate to better work with the RDX. The dampers (Shocks) have 32 way adjustability and and includes adjustable lower spring perches for height adjustment. The original coilover springs are not included as we threw them away... I would not recommend using such crazy high spring rates anyways.

Spring rate comparison:
Stock RDX Spring rates: F = 171 lbs/in R = 344 lbs/in
Eibach Lowering Springs: F = 190 lbs/in R = 375 lbs/in
Original Coilovers: F = 671 lbs/in R = 503 lbs/in
Swift Springs: F = 280 lbs/in R = 392 lbs/in

Store listing:
https://d2bdmotorwerks.com/i-2389589...rdx-tc1-2.html

I did also get a custom set of longer front dampers form JVR which if installed will allow the front to be adjusted higher. In the pics of our RDX the front height was at it's highest setting and could go lower from there (which is why we asked for longer dampers) and the rear could be set higher or lower from what shows in the pic. 

I will include the longer front dampers with the kit so the new owner will have two front sets!

This kit with custom Swift springs was $1500... will let the whole kit go for half that. We only put about 50 miles on them before the wife said they have to come off and we went back to our Eibachs. LOL

My loss is someone else's gain. Details on the install are posted below. 
https://acurazine.com/forums/3g-rdx-...talled-994289/

Buyer covers shipping.