When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey everyone, not sure if there's a market for these or not but I have no use for them anymore. I have both heads off a 2012 MDX that I personally reconditioned.
All gasket surfaces were cleaned, all bolt holes were cleaned, valves were de-carbon'd and lapped, cams and roller rockers inspected for the usual pitting/failure.
Only thing needed is a valve adjustment once torqued to a block! $600 takes both, if you're out of state I won't cover shipping charges.
Are these your own personal items and why don't you have a use for them?
I work at an Acura dealer, I have too many sets of these, trying to make room at home. There's nothing wrong with them, they were removed off an MDX with a cracked cylinder.
Originally Posted by 3gtltypes
Still available? Any pics?
They're still available! Finally about to post pics.
Finally posting pictures. Only one head is pictured, you will be getting the set of heads (bank 1 and bank 2) both reconditioned complete as pictured!
Head gasket surface and combustion chambers cleaned. Showing intake valves lapped to corresponding valve seats. Showing intake valves lapped vs intake valves to show before and after. New cam plug o-ring. New cam seal and rocker shaft holder resealed with Hondabond HT. Showing that it's a complete head with OEM cam sensor. Showing that it's a complete head. Intake runner gasket surface and valve cover gasket surface cleaned. Cooling bypass housing gasket surfaces cleaned.
