Simple Alpine Sub Setup
#1
Advanced
Thread Starter
Simple Alpine Sub Setup
W'sup AZINE. I am currently running an Alpine MRV-500 amp, a Alpine 10inch Type S sub, and Stinger Amp wires. I am not going to show how I ran the power wires but will show you on how I connected the amp with out a REMOTE WIRE and RCA wires. If you do some research on certain amps, some amps will have a SPEAKER LEVEL INPUT connection (as you can see in the pics). The cool thing about the speaker level input is that it acts like a remote wire too with out having to have the remote wire running to a fuse or lci. Here are some pictures, hopefully this can clear things up for people on who want to do a simple set up with out having to buy an lci or have any extra wiring.
My first picture shows my setup using a AudioControl LC2i. I would need to run power wires and a remote wire along with RCA cable. After running wires, i would have to mount or hide it.
It bothered me so much that I decided to remove the Audio Control LC2i and make use of the Speaker Level Input on the Alpine MRV-500 amp. I am grabbing the speaker level output from the stock sub connection. (sorry no pics).
Finished Product.
Hope You Guys Enjoyed.
My first picture shows my setup using a AudioControl LC2i. I would need to run power wires and a remote wire along with RCA cable. After running wires, i would have to mount or hide it.
It bothered me so much that I decided to remove the Audio Control LC2i and make use of the Speaker Level Input on the Alpine MRV-500 amp. I am grabbing the speaker level output from the stock sub connection. (sorry no pics).
Finished Product.
Hope You Guys Enjoyed.
#4