Go Back  AcuraZine - Acura Enthusiast Community > AcuraZine TL/TLX Community > Fifth Generation TLX (2015+)
Reload this Page >

:: Excelerate Performance :: Jared's 2018 TLX A-Spec

Notices

:: Excelerate Performance :: Jared's 2018 TLX A-Spec

 
Old 01-18-2019, 08:42 AM
  #1  
Platinum Sponsor
Thread Starter
 
ExcelerateRep's Avatar
 
Join Date: May 2010
Location: Branford, CT
Posts: 2,192
Received 324 Likes on 268 Posts
:: Excelerate Performance :: Jared's 2018 TLX A-Spec


Hey Acurazine,

We've been busy in the winter months but wanted to share some work we recently wrapped up!



Jared came to us because he wanted his TLX to stand out from the rest.

With his set of custom made aero running from the front bumper to the rear valance, he knew to take the look to the next level the lower level to be exact!

We installed an Eibach Pro-Kit on his 2018 Acura TLX A-Spec AWD (offering a little over 1 1/4″ of drop) along with their Pro-Alignment kit to help keep it planted.

A set of H&R spacers were installed in all 4-corners to help fill out the fenders and clear some new brakes! The front called for 15MM and the rear called for 20MM.




We also installed a fresh Rotora big brake kit consisting of a 6 piston front caliper, and a smaller 4 piston rear caliper, along with a fully functional electronic e-brake!

This helped add some serious stopping power and really make his TLX stand out.

We wrapped up the BBK install by flushing in some fresh Motul brake fluid!





Feel free to send us a PM or an email if you are looking to get your car setup!

We hope to see this TLX again soon for an exhaust and wheels...

Happy modding!
__________________
Excelerate Performance
Connecticut's Finest and Master Distributor For:
Stoptech | TEIN | Ktuner | XLR8 | ISC | Kraftwerks
ExcelerateRep is offline  
The following 2 users liked this post by ExcelerateRep:
JR_Rider (01-20-2019), silverTL6 (01-19-2019)
Old 01-18-2019, 12:13 PM
  #2  
Acura drove me away too..
iTrader: (2)
 
BlueAc's Avatar
 
Join Date: Dec 2004
Location: Philly
Age: 37
Posts: 1,768
Received 105 Likes on 64 Posts
Looks great!

BlueAc is offline  
The following users liked this post:
JR_Rider (01-20-2019)
Old 02-01-2019, 09:49 AM
  #3  
Registered Member
 
Join Date: Jul 2010
Location: Burlington, VT
Age: 26
Posts: 103
Received 10 Likes on 8 Posts
Wow. Beautiful.
ntmera is offline  
Old 02-03-2019, 08:12 AM
  #4  
Registered Member
 
littlelee17's Avatar
 
Join Date: Nov 2015
Age: 25
Posts: 57
Received 5 Likes on 4 Posts
Looks amazing! Any exhaust work done yet?
littlelee17 is offline  
Old 02-04-2019, 10:39 PM
  #5  
Senior Moderator
 
neuronbob's Avatar
 
Join Date: Nov 2001
Location: Cleveland area, OH
Posts: 19,244
Received 3,503 Likes on 1,766 Posts
Like the splitters. Looking good.
neuronbob is offline  
Old 02-14-2019, 08:01 AM
  #6  
Registered Member
 
miner's Avatar
 
Join Date: Apr 2002
Location: The Woodlands, TX
Age: 61
Posts: 3,623
Received 299 Likes on 190 Posts
anything to make it quicker?
miner is offline  
The following users liked this post:
silverTL6 (02-15-2019)
Old 02-15-2019, 07:47 PM
  #7  
Senior Moderator
 
neuronbob's Avatar
 
Join Date: Nov 2001
Location: Cleveland area, OH
Posts: 19,244
Received 3,503 Likes on 1,766 Posts
^^^
Nah. The only thing to make the TLX better at this point would be a manual transmission. My car would be dreamy with a manual...
neuronbob is offline  
The following users liked this post:
Speed_Racer (02-19-2019)
Old 02-18-2019, 04:39 AM
  #8  
06 TL 6MT + 18 ATS-V 8AT
iTrader: (2)
 
Join Date: Jul 2004
Location: Fremont, CA
Age: 41
Posts: 469
Received 106 Likes on 63 Posts
Did anyone ever try slapping the CT blower on a TLX?
silverTL6 is offline  
Old 02-18-2019, 04:51 AM
  #9  
Moderator
iTrader: (1)
 
justnspace's Avatar
 
Join Date: Feb 2010
Posts: 80,402
Received 13,973 Likes on 10,379 Posts
Originally Posted by silverTL6 View Post
Did anyone ever try slapping the CT blower on a TLX?

why?? the CT kit is inefficient and will add WEIGHT and HEAT, both which are detrimental to or the opposite of what makes you go quicker....
justnspace is offline  
Old 02-19-2019, 08:24 AM
  #10  
Registered Member
iTrader: (4)
 
EL19's Avatar
 
Join Date: Nov 2006
Location: DC
Age: 32
Posts: 5,299
Received 161 Likes on 136 Posts
Looks great. Very tastefully done
EL19 is offline  
Old 02-22-2019, 02:28 AM
  #11  
06 TL 6MT + 18 ATS-V 8AT
iTrader: (2)
 
Join Date: Jul 2004
Location: Fremont, CA
Age: 41
Posts: 469
Received 106 Likes on 63 Posts
Originally Posted by justnspace View Post
why?? the CT kit is inefficient and will add WEIGHT and HEAT, both which are detrimental to or the opposite of what makes you go quicker....
They still sold a decent number of them, and they are still faster than stock

The main downside was the bang for the buck ratio, but given the lack of options...
silverTL6 is offline  
Old 02-22-2019, 12:58 PM
  #12  
Registered Member
 
Join Date: Jan 2012
Posts: 8
Likes: 0
Received 1 Like on 1 Post
Anyone know if there is a specific Rotora Kit/bracket combo - or were the brackets custom made? I haven't been able to find anything yet. It's unfortunate that Acura didn't include Brembos on Aspecs by default
eyeTn3rd is offline  
Old 04-02-2019, 03:51 PM
  #13  
Registered Member
 
Join Date: Apr 2019
Age: 38
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Did the factory wheel studs have to be replaced with longer ones to accomodate the spacers/factory aspec wheels?
Ek9max is offline  
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
princeo5
Fifth Generation TLX (2015+)
2
02-02-2019 07:50 PM
ExcelerateRep
Fifth Generation TLX (2015+)
4
01-05-2016 03:06 PM
badazzTL
Ramblings
68
11-15-2007 10:34 PM
Chief F1 Fan
Ramblings
37
10-05-2005 04:24 PM


Thread Tools
Search this Thread
Quick Reply: :: Excelerate Performance :: Jared's 2018 TLX A-Spec


Contact Us - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.