Spotted: Toronto/GTA
#203
3.5 psi
iTrader: (1)
the only body kit for the CL is the RonJon kit and the Versus kit which is discontinued i think. This is a custom molded TL aero kit. I'm dropped on tein basic coilovers probably about 2-2.5" or so. All my mods are listed in my Garage: https://acurazine.com/forums/garage/...149-gnuts.html
#204
Intermediate
Join Date: Jul 2010
Location: Brampton, Ontario, Canada
Age: 42
Posts: 48
Likes: 0
Received 5 Likes
on
2 Posts
tried to view the pictures but it said i don't have the previlege to do so. <<sigh>>. You're from B-town gnuts? I'm down by mavis & steeles. maybe some day we can meet so i can see your car in person rather than pictures.
#207
Intermediate
Join Date: Jul 2010
Location: Brampton, Ontario, Canada
Age: 42
Posts: 48
Likes: 0
Received 5 Likes
on
2 Posts
i bought 01 CL Type S from Ken over the Toronto Accord Forum. He kept it in mint condition. i was going to buy a TL Type S A-spec but once i saw his car, i was like "i've got to buy this". Although the milage was high (186 000) but it drives quite nice. All i had to do was flush the tranny, oil change, shampoo the engine bay, polish and wax.
i need to change a sway bar bushing in the rear. called a few dealers but not in stock. as a temp solution to get rid of the clunking noise, i took the bushing out and layed a few layers of hockey tape inside and put it back. it solved the problem but i'll need to replace it once they have stock.
the front brakes are a little squeaky when not used hard. any help on solving it? it's hawk pads on crossed drilled rotors.
also, the dash board dimmer switch is not working, any idea where i can get one of these?
i need to change a sway bar bushing in the rear. called a few dealers but not in stock. as a temp solution to get rid of the clunking noise, i took the bushing out and layed a few layers of hockey tape inside and put it back. it solved the problem but i'll need to replace it once they have stock.
the front brakes are a little squeaky when not used hard. any help on solving it? it's hawk pads on crossed drilled rotors.
also, the dash board dimmer switch is not working, any idea where i can get one of these?
#208
3.5 psi
iTrader: (1)
PaiGow right? I know his car. Get some polyurethane bushings from Performance Improvements. They can get you some Energy Bushings. I wrapped the bar in teflon tape (same as plumbing stuff) many times, then put the greased up bushings on. Never had a squeak again.
I just put on EBC slotted rotors and green stuff pads and i have a squeek too. I duno what it's from.
Do you ever dim your dash lights? I've never touched mine. Not sure on that one.
I just put on EBC slotted rotors and green stuff pads and i have a squeek too. I duno what it's from.
Do you ever dim your dash lights? I've never touched mine. Not sure on that one.
#215
Was on Hwy 7 and Woodbine Saturday afternoon and saw two Civics and two Integra's (red and a white one of each) done up waiting to make a left. Also at the same intersection saw a WDP TL with green rims, any possible members on here match that description? The green wheels on the WDP looked pretty crazy
#217
The WDP Noob
Join Date: Jul 2007
Location: Markham Ont
Age: 38
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Was on Hwy 7 and Woodbine Saturday afternoon and saw two Civics and two Integra's (red and a white one of each) done up waiting to make a left. Also at the same intersection saw a WDP TL with green rims, any possible members on here match that description? The green wheels on the WDP looked pretty crazy
#219
Racer
iTrader: (4)
Join Date: Feb 2009
Location: Brampton, Ontario, Canada
Age: 35
Posts: 404
Likes: 0
Received 19 Likes
on
13 Posts
Pretty sure i spotted Volly yesterday afternoon, gold 2G TL with gold rims and an acurazine sticker on the back window..i was behind you on bovaird in a supra for a while. And daaaaamn your car looks good!
#221
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 31
Posts: 17,428
Received 1,484 Likes
on
1,048 Posts
That white TL with the CF hood is baby boi gsr, I think he's banned
#223
Intermediate
Join Date: Jul 2010
Location: Brampton, Ontario, Canada
Age: 42
Posts: 48
Likes: 0
Received 5 Likes
on
2 Posts
spotted 1G 2.3CL NBP by Mavis and Steeles saturday while i was driving my sis's big old 32" tube tv. should've molded that into the trunk. 2 young asian dudes in the 2.3CL.
#225
Intermediate
Join Date: Jul 2010
Location: Brampton, Ontario, Canada
Age: 42
Posts: 48
Likes: 0
Received 5 Likes
on
2 Posts
nothing wrong with being asian. i'm one too. just don't drive around P-mall. lots of people can't drive there for real. i avoid going there. if i really have to, i drive like a granny and try as much as possible to stay far away from everyone else as they do not check their blindspots. a lady reversed into my old prelude once and it was bright outside too, must be a faulty auto dimming rear view mirror that caused her not to see my bright blue car. another time some guy almost ran me off the road onto incoming traffice because he changed lane before he check his blindspot. he looked after i beep the horn and continued to merge in. i had to swirl quickly into oncoming traffic, slammed the brake and swirl back. damn idiot.
#227
e92 335i
#228
#229
#232
Today at noon spot a WDP type-s tail and a-spec lip kit 5 star rims parked in front of store blind to go on Queen Brampton.
Locooman, i live right by the park near the mall too.
Locooman, i live right by the park near the mall too.