What has two thumbs and 700+ HP?
The following users liked this post:
SaaBaaDoo (08-30-2018)
The following users liked this post:
oonowindoo (08-29-2018)
The following users liked this post:
rockstar143 (08-30-2018)
The following users liked this post:
JT4 (08-30-2018)
#365
Burning Brakes
Thread Starter
My week!
About this time last year I did a quick polish and coated with CQuartz UK. Due to driving the hell out of it this year, not taking care of the paint like I should have, problems with CarPro Reload streaking/staining, it was time to give the kitty some love.
First steps were to thoroughly wash and decontaminate the car. I used Chemical Guys Mr. Pink shampoo and followed it up with some CarPro Iron X. Once dried I pulled it in the garage, clayed it then masked off the trim and stripes.
Here's what the paint looked like after clay. These photos are from the hood, but the majority of the car looked just as bad or worse.
I used a combination of the Griots BOSS G21 polisher and a Porter Cable 7424 with 3" backing plate with the following pad/polish combination on both.
Griots BOSS Microfiber/Griots BOSS Fast Correcting Cream
Griots BOSS Orange Pad/Griots BOSS Correcting Cream
Griots BOSS Black Pad/Griots Perfecting Cream
To give you an idea of how bad it was, here you can see where I had gone over the rear quarter partially with the microfiber pad/fast correcting cream.
Three step correction done on top of front bumper. The clarity and darkness restored to the paint was amazing.
Day one: Hood and front bumper are polished.
Day two: Roof, trunk lid, and rear bumper polished
Day three: Sides are polished
Like a mirror!!!
Day four: Coated with Gyeon MOHS Q2 and followed up with Gyeon Booster.
Day five: Reveal day (I'll get some better pics soon)
Still need to do the wheels and calipers, but that will come soon!
First steps were to thoroughly wash and decontaminate the car. I used Chemical Guys Mr. Pink shampoo and followed it up with some CarPro Iron X. Once dried I pulled it in the garage, clayed it then masked off the trim and stripes.
Here's what the paint looked like after clay. These photos are from the hood, but the majority of the car looked just as bad or worse.
I used a combination of the Griots BOSS G21 polisher and a Porter Cable 7424 with 3" backing plate with the following pad/polish combination on both.
Griots BOSS Microfiber/Griots BOSS Fast Correcting Cream
Griots BOSS Orange Pad/Griots BOSS Correcting Cream
Griots BOSS Black Pad/Griots Perfecting Cream
To give you an idea of how bad it was, here you can see where I had gone over the rear quarter partially with the microfiber pad/fast correcting cream.
Three step correction done on top of front bumper. The clarity and darkness restored to the paint was amazing.
Day one: Hood and front bumper are polished.
Day two: Roof, trunk lid, and rear bumper polished
Day three: Sides are polished
Like a mirror!!!
Day four: Coated with Gyeon MOHS Q2 and followed up with Gyeon Booster.
Day five: Reveal day (I'll get some better pics soon)
Still need to do the wheels and calipers, but that will come soon!
The following 4 users liked this post by SaaBaaDoo:
The following users liked this post:
SaaBaaDoo (12-21-2018)
#368
Burning Brakes
Thread Starter
The following 2 users liked this post by SaaBaaDoo:
Matt Lumpkins (12-21-2018),
nist7 (12-21-2018)
#369
Moderator
iTrader: (3)
Stunning
Great work!
Great work!
The following users liked this post:
SaaBaaDoo (12-21-2018)
The following users liked this post:
SaaBaaDoo (12-22-2018)
The following users liked this post:
SaaBaaDoo (12-22-2018)
#372
Burning Brakes
Thread Starter
The following users liked this post:
SaaBaaDoo (12-22-2018)
#374
Burning Brakes
Thread Starter
that was me last year too.
The following users liked this post:
SaaBaaDoo (12-22-2018)
#376
Burning Brakes
Thread Starter
Some color mods, tail light overlays, and installed a Legmaker CAI. Supporting my local Mopar group with the windshield banner too.
The following 2 users liked this post by SaaBaaDoo:
civicdrivr (07-19-2019),
Midnight Mystery (04-06-2020)
#377
Moderator
S/C whine
The following users liked this post:
SaaBaaDoo (07-16-2019)
#378
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
my supercharger just complains about her ass looking fat and the dishes not being done correctly.
Looking good, brother...
a vinyl decal to slap on for meets...sure...but unless them hos is making your car payment...fuck that windshield decal!
Looking good, brother...
a vinyl decal to slap on for meets...sure...but unless them hos is making your car payment...fuck that windshield decal!
The following users liked this post:
SaaBaaDoo (07-22-2019)
#379
Burning Brakes
Thread Starter
The Hellcat is still running strong! Almost 50k on the odometer and I got sick of the black so decided to wrap it myself!
But first...look at all those heat exchangers!!!
But first...look at all those heat exchangers!!!
The following 7 users liked this post by SaaBaaDoo:
00TL-P3.2 (04-06-2020),
1StGenCL (04-06-2020),
Aman (04-06-2020),
nist7 (04-06-2020),
rockstar143 (04-06-2020),
and 2 others liked this post.
The following users liked this post:
SaaBaaDoo (04-06-2020)
The following users liked this post:
SaaBaaDoo (04-06-2020)
#382
Burning Brakes
Thread Starter
The following users liked this post:
SaaBaaDoo (04-06-2020)
#384
Moderator
Very nice work & looks great
The following users liked this post:
SaaBaaDoo (04-06-2020)