Quick question on PIAA wiper blades
#1
Instructor
Thread Starter
Quick question on PIAA wiper blades
Hello everyone, I has a quick question to ask regarding the PIAA wiper blades for our second gen CLs and/or TLs. I want to get the newer models such as the SI-Tech Run Flat, but my questions are:
1- Do they still use the super silicon with these blades?
&
2- Can they be refilled using the wiper blade refills that PIAA sells, or am I going to have to buy a whole new set of wiper blades when the time comes to replace them? (That'll become expensive)
If those two conditions aren't met, then I'm going to go with the original PIAA Super Silicon Wiper Blades.
Thanks for all the input
1- Do they still use the super silicon with these blades?
&
2- Can they be refilled using the wiper blade refills that PIAA sells, or am I going to have to buy a whole new set of wiper blades when the time comes to replace them? (That'll become expensive)
If those two conditions aren't met, then I'm going to go with the original PIAA Super Silicon Wiper Blades.
Thanks for all the input
#5
http://www.piaa.com/wiperblades/si-tech.html
On the bottom, it says Super Silicone Technology.
While I'm not 100% sure, from these two links it says they're not compatible with the Si-Tech so you might not be able to change the inserts.
http://www.shopatron.com/products/pr...PIA97048/353.0
http://www.shopatron.com/products/pr...0.0.0.0?pp=12&
Better yet, just call them here.
PIAA Corporation USA
3004 N.E. 181st Ave.
Portland, OR 97230 US
P: 800.525.7422
F: 503.489.6600
and you can't go wrong with the basic wipers. I have the Super Sporza and I think they're great. Except I've noticed some scratches on the windshield after a few months with them.
On the bottom, it says Super Silicone Technology.
While I'm not 100% sure, from these two links it says they're not compatible with the Si-Tech so you might not be able to change the inserts.
http://www.shopatron.com/products/pr...PIA97048/353.0
http://www.shopatron.com/products/pr...0.0.0.0?pp=12&
Better yet, just call them here.
PIAA Corporation USA
3004 N.E. 181st Ave.
Portland, OR 97230 US
P: 800.525.7422
F: 503.489.6600
and you can't go wrong with the basic wipers. I have the Super Sporza and I think they're great. Except I've noticed some scratches on the windshield after a few months with them.
Last edited by SpiderX1016; 06-01-2012 at 09:42 PM.
#6
Instructor
Thread Starter
Thanks for all the help guys. I think i'm just going to go with the regular PIAA super silicon blades. They'll save me money in the long run due to the refills and they have high prestige from members of this forum.
Thread
Thread Starter
Forum
Replies
Last Post