Chassis > Horsepower

Thread Tools
 
Search this Thread
 
Old 12-04-2010 | 07:59 AM
  #41  
AMUA6's Avatar
ScoobyZINE
iTrader: (7)
 
Joined: Dec 2009
Posts: 3,986
Likes: 41
From: Ocoee, TN
Old 12-04-2010 | 01:01 PM
  #42  
black label's Avatar
Trolling Canuckistan
 
Joined: Oct 2005
Posts: 10,453
Likes: 811
From: 100 Legends Way, Boston, MA 02114
Originally Posted by v6cord2k5
For some reason, I knew a vtec Mini would come up in this thread.
How about a Porsche 914 with a 300-350 ci V8?
Old 12-04-2010 | 01:14 PM
  #43  
Aman's Avatar
Your Friendly Canadian
 
Joined: Dec 2007
Posts: 17,434
Likes: 1,492
From: Toronto, Ontario
Originally Posted by black label
How about a Porsche 914 with a 300-350 ci V8?
I see your 350 914 and raise you an LS7 S2000
Old 12-04-2010 | 01:24 PM
  #44  
Aman's Avatar
Your Friendly Canadian
 
Joined: Dec 2007
Posts: 17,434
Likes: 1,492
From: Toronto, Ontario
Originally Posted by dallison
anyone can go fast in a straight line, it's the corners that count
I'd have to disagree to an extent. Going fast is a lot more than hitting the gas. Ever driven at a drag strip? You need to get the launch right, which requires finesse with the throttle and the clutch. And then you gotta worry about getting every shift right, shifting quick enough without busting your transmission, etc. And the car isn't moving in a straight line the entire time. In a FWD car, you'll have to worry about torque steer, in a RWD car you have to watch for the rear stepping out, etc.

I'd say being quick in a straight line is almost, if not as challenging as going around a corner quick.
Old 12-04-2010 | 01:42 PM
  #45  
ghttf's Avatar
 
Joined: Oct 2007
Posts: 1,038
Likes: 0
Old 12-04-2010 | 02:55 PM
  #46  
civicdrivr's Avatar
Whats up with RDX owners?
iTrader: (9)
 
Joined: Jul 2008
Posts: 36,357
Likes: 8,495
From: VA
That Toronado can clearly turn.
Old 12-04-2010 | 02:59 PM
  #47  
civicdrivr's Avatar
Whats up with RDX owners?
iTrader: (9)
 
Joined: Jul 2008
Posts: 36,357
Likes: 8,495
From: VA
Originally Posted by Costco
lol, Supras. Power is one thing, racing mainly from a roll is another thing. Add aftermarket modifications and what I assume are amateur drivers and that's a bunch of variables that are hard to account for.


We used to have a saying at my old job:

How is a 300hp Supra and a 1000hp Supra the same?


They both run 13s.
Old 12-04-2010 | 08:44 PM
  #48  
subinf's Avatar
One on the right for me
 
Joined: Jul 2004
Posts: 27,914
Likes: 271
From: Bay Area, CA
Originally Posted by Sly Raskal
The topic of this thread is one reason I love my Integra.
Aside from my mustang, the Integra was the car I put the most amount of work into and could beat the absolute shit out of on the curves. And it never complained.
Old 12-05-2010 | 12:57 AM
  #49  
Eoanou's Avatar
'10 Hyundai Genesis Coupe
 
Joined: Dec 2006
Posts: 4,779
Likes: 7
From: CT
Sorry power over-handling, I don't have the confidence to take corners at high speed, so to me this is a one sided argument.
Old 12-05-2010 | 02:48 AM
  #50  
speedemon90's Avatar
Suzuka Master
 
Joined: Jan 2009
Posts: 9,012
Likes: 439
From: SoCal
Originally Posted by Aman
I'd have to disagree to an extent. Going fast is a lot more than hitting the gas. Ever driven at a drag strip? You need to get the launch right, which requires finesse with the throttle and the clutch. And then you gotta worry about getting every shift right, shifting quick enough without busting your transmission, etc. And the car isn't moving in a straight line the entire time. In a FWD car, you'll have to worry about torque steer, in a RWD car you have to watch for the rear stepping out, etc.

I'd say being quick in a straight line is almost, if not as challenging as going around a corner quick.
Launching a car perfectly is very technical, but overall in public streets at least, cornering is more fun. At least that is my opinion
Old 12-05-2010 | 06:23 AM
  #51  
dallison's Avatar
registered pw
 
Joined: Aug 2003
Posts: 38,822
Likes: 354
From: south central pa
Originally Posted by Aman
Ever driven at a drag strip? You need to get the launch right, which requires finesse with the throttle and the clutch. And then you gotta worry about getting every shift right, shifting quick enough without busting your transmission, etc..
A drag strip is different than everything else. You are correct that it takes a lot of skill and there are 100 things that you need to pay attention to inorder to not spin the wheels, break in the staging area, not hitting the wall or the guy you are running against.
Old 12-05-2010 | 03:46 PM
  #52  
Aman's Avatar
Your Friendly Canadian
 
Joined: Dec 2007
Posts: 17,434
Likes: 1,492
From: Toronto, Ontario
Originally Posted by speedemon90
Launching a car perfectly is very technical, but overall in public streets at least, cornering is more fun. At least that is my opinion
I guess we'll have to agree to disagree, then

Originally Posted by dallison
A drag strip is different than everything else. You are correct that it takes a lot of skill and there are 100 things that you need to pay attention to inorder to not spin the wheels, break in the staging area, not hitting the wall or the guy you are running against.
On the street however, you don't need as much finesse to corner quick, which was your original point. IMO anybody can take a corner quickly on the street, as long as you stay within the limits of your car. It's just a matter of turning the wheel a certain amount. Once you break through those limits however (understeer, oversteer, what have you), that's when it takes a skilled driver to keep everything under control.
Old 12-05-2010 | 04:36 PM
  #53  
black label's Avatar
Trolling Canuckistan
 
Joined: Oct 2005
Posts: 10,453
Likes: 811
From: 100 Legends Way, Boston, MA 02114
Originally Posted by Aman
I'd have to disagree to an extent. Going fast is a lot more than hitting the gas. Ever driven at a drag strip? You need to get the launch right, which requires finesse with the throttle and the clutch. And then you gotta worry about getting every shift right, shifting quick enough without busting your transmission, etc. And the car isn't moving in a straight line the entire time. In a FWD car, you'll have to worry about torque steer, in a RWD car you have to watch for the rear stepping out, etc.

I'd say being quick in a straight line is almost, if not as challenging as going around a corner quick.
The thing is, it's difficult to launch a car that isn't really powerful as well. Launching a 1000hp car will be more difficult than launching a 150hp car but either way, at the drag strip a person who can launch very well will be much quicker at the end in both cars than someone who can't launch well. When you throw an automatic transmission into the equation (the clear majority of cars on the road), most of what makes launching difficult becomes a moot point.

I think the point of the conversation is would you rather have a car that you can mash the gas on the highway and be pushed firmly into the street or a car that you can dive into a tight corner and feel like your going to rip the side bolsters off your seat because the car holds the road so well.
Old 12-05-2010 | 04:51 PM
  #54  
Aman's Avatar
Your Friendly Canadian
 
Joined: Dec 2007
Posts: 17,434
Likes: 1,492
From: Toronto, Ontario
^ In that case, I'd still stick with power, because IMO it's much more exploitable on a day-to-day basis, and I'd complain more about a lack of power than a lack of handling in my DD. Like I said before, with a WW/track toy, it's completely different.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MrHeeltoe
1G TSX Tires, Wheels, & Suspension
20
02-23-2023 01:54 PM
knight rider
Car Talk
9
03-04-2016 08:59 AM
MrHeeltoe
2G TSX Tires, Wheels & Suspension
3
09-29-2015 10:43 PM
MrHeeltoe
3G TL Tires, Wheels & Suspension
0
09-28-2015 05:43 PM



Quick Reply: Chassis > Horsepower



All times are GMT -5. The time now is 03:51 AM.