Britman? Gertish? It's a Mini
#42
Ex-OEM King
Noticed a bit of stumbling while idling in line to pick up my daughter from school yesterday. Hoping it's just to do with the dealer provided first tank of gas. Will be filling up with 93 today & we'll see if it improves.
Still haven't decided if I like the auto-stop. With how hot it's been here, it only stops the engine for about 30 seconds, then starts again due to cabin temp. Not sure if it's being extra hard on the engine to cycle as much as it is. So I either disable it (have to push the button every time you start the truck, or just keep light enough pressure on the brake so it won't engage.
Still haven't decided if I like the auto-stop. With how hot it's been here, it only stops the engine for about 30 seconds, then starts again due to cabin temp. Not sure if it's being extra hard on the engine to cycle as much as it is. So I either disable it (have to push the button every time you start the truck, or just keep light enough pressure on the brake so it won't engage.
Also, y u no get 4WD?
The following users liked this post:
Costco (09-22-2016)
#43
Moderator
Thread Starter
Also, in the last 15 years, I can't think of a situation/time that I've needed 4WD.
![Shrug](https://acurazine.com/forums/images/smilies/shrug.gif)
This'll be 98% a street truck, with a little time spent at our ranch on pretty well maintained oilfield gravel roads. Out there we have some dedicated trucks that live there & can get beat to hell without worry.
#46
Ex-OEM King
I don't necessarily dislike the auto-stop, so much as don't see the point to turn the engine off for 22 seconds, then restart to keep the cabin from getting hot (mid-90s outside). Maybe in the cooler months it'll make more sense.
Also, in the last 15 years, I can't think of a situation/time that I've needed 4WD.![Shrug](https://acurazine.com/forums/images/smilies/shrug.gif)
This'll be 98% a street truck, with a little time spent at our ranch on pretty well maintained oilfield gravel roads. Out there we have some dedicated trucks that live there & can get beat to hell without worry.
Also, in the last 15 years, I can't think of a situation/time that I've needed 4WD.
![Shrug](https://acurazine.com/forums/images/smilies/shrug.gif)
This'll be 98% a street truck, with a little time spent at our ranch on pretty well maintained oilfield gravel roads. Out there we have some dedicated trucks that live there & can get beat to hell without worry.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
I'd say join me on my next off road trip but there's no way that beast is going to make it up any of the switchbacks lol. Also, gravel roads don't need 4WD.
#47
Moderator
Thread Starter
As a 'cheaper' option, our man juniorbean has me quite tempted to get into the karting world.
#48
Moderator
Thread Starter
Tiny update:
When we brought it home:
![Name: 20160916_163216.jpg
Views: 710
Size: 119.5 KB](https://acurazine.com/forums/attachments/car-talk-5/58727d1501320284-britman-gertish-its-mini-20160916_163216.jpg)
Progress:
![Name: 20160928_190325.jpg
Views: 712
Size: 111.3 KB](https://acurazine.com/forums/attachments/car-talk-5/58728d1501320284-britman-gertish-its-mini-20160928_190325.jpg)
Almost done in the rear, want to swap in a black Ford emblem:
![Name: 20160928_191435.jpg
Views: 701
Size: 103.6 KB](https://acurazine.com/forums/attachments/car-talk-5/58729d1501320284-britman-gertish-its-mini-20160928_191435.jpg)
Also, Cravenspeed is having to send me another antenna, the first one got lost in the mail.
Next up, is removing the SPORT badges on the bedsides, not sure if I'll keep the EcoBoost badges on the doors & will probably change or swap the F150 fender badges eventually, since they have mounting pins/holes behind them.
When we brought it home:
![Name: 20160916_163216.jpg
Views: 710
Size: 119.5 KB](https://acurazine.com/forums/attachments/car-talk-5/58727d1501320284-britman-gertish-its-mini-20160916_163216.jpg)
Progress:
![Name: 20160928_190325.jpg
Views: 712
Size: 111.3 KB](https://acurazine.com/forums/attachments/car-talk-5/58728d1501320284-britman-gertish-its-mini-20160928_190325.jpg)
Almost done in the rear, want to swap in a black Ford emblem:
![Name: 20160928_191435.jpg
Views: 701
Size: 103.6 KB](https://acurazine.com/forums/attachments/car-talk-5/58729d1501320284-britman-gertish-its-mini-20160928_191435.jpg)
Also, Cravenspeed is having to send me another antenna, the first one got lost in the mail.
Next up, is removing the SPORT badges on the bedsides, not sure if I'll keep the EcoBoost badges on the doors & will probably change or swap the F150 fender badges eventually, since they have mounting pins/holes behind them.
#49
Ex-OEM King
I have a small quick car already but I almost like off road adventures more. The sights these things can take you to are some that not many humans will ever see. Takes all kinds though!
#50
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,618
Received 3,830 Likes
on
2,569 Posts
#51
Moderator
Thread Starter
#53
Moderator
Thread Starter
We got plenty, come shop!
The following users liked this post:
00TL-P3.2 (09-30-2016)
#55
Senior Moderator
The following 2 users liked this post by fsttyms1:
00TL-P3.2 (09-30-2016),
justnspace (09-29-2016)
#56
Team Owner
Congrats!!
Just turn the auto/stop off and forget it even exists.
Just turn the auto/stop off and forget it even exists.
The following users liked this post:
00TL-P3.2 (09-30-2016)
#57
Moderator
Thread Starter
Something I've noticed in the ~600 miles I've put on the truck so far, on a particular ~1 mile stretch of really poorly patched road, both directions on my commute. Truck makes a bit of a sidestep in the rear when going over the worse parts of the road; caught me off guard the first time, almost like it's trying to swerve.
Some guys over on the F150 forum are experiencing similar behavior, seems a new set of rear shocks kills most of the problem (consensus seems to be the trucks are oversprung & underdamped).
I'm loving it, coming from 15 years of cars, this is a big change. No regrets so far, though the 18-20mpg is a big drop from the 29-33 in the Civic.
How did you spray it without killing the Ford script? Love the way yours looks & the metallic in it will work well with the Magnetic.
Yeah, it is starting to get old, just sucks to have to kill it every time.
There's an app called Forscan to alter some of the coding, there may be a way to default it to off, along with lots of other tricks.
Some guys over on the F150 forum are experiencing similar behavior, seems a new set of rear shocks kills most of the problem (consensus seems to be the trucks are oversprung & underdamped).
Yeah, it is starting to get old, just sucks to have to kill it every time.
There's an app called Forscan to alter some of the coding, there may be a way to default it to off, along with lots of other tricks.
#58
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
I think it's translucent so the chrome still shows through while you bury the blue.
my work truck does that too...it feels like the bed of the truck is getting disconnected from the cab...I chalked it up to just how a truck is supposed to drive.
my work truck does that too...it feels like the bed of the truck is getting disconnected from the cab...I chalked it up to just how a truck is supposed to drive.
#59
Moderator
Thread Starter
Did some un-scientific testing yesterday & drove it with the traction control off, no sidestep. Not sure if coincidence, will be trying it a few more times.
A few guys reporting that putting some weight in the bed helps as well.
#61
Moderator
Thread Starter
![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
#62
Moderator
Thread Starter
Finished debadging the truck & got the CravenSpeed Stubby installed.
![Name: 20161001_175748.jpg
Views: 711
Size: 133.6 KB](https://acurazine.com/forums/attachments/car-talk-5/58688d1501320111-britman-gertish-its-mini-20161001_175748.jpg)
Next up is attempting the duplicolor mentioned above om the Ford emblems & maybe the fender badges. Thought about trying to file down the XLT part of the fender badges & replace it with the EcoBoost badges from the doors, they're the right size for it.
![Name: 20161001_175748.jpg
Views: 711
Size: 133.6 KB](https://acurazine.com/forums/attachments/car-talk-5/58688d1501320111-britman-gertish-its-mini-20161001_175748.jpg)
Next up is attempting the duplicolor mentioned above om the Ford emblems & maybe the fender badges. Thought about trying to file down the XLT part of the fender badges & replace it with the EcoBoost badges from the doors, they're the right size for it.
![Ponder](https://acurazine.com/forums/images/smilies/ponder.gif)
#63
Team Owner
You might want to ask your dealer to see if they can reprogram it so it remembers the last setting before you turn off the car.
My 13 335i did that, dealer did a 1 time program, so it would remember where I left off.
If you bought the car, i would definitely turn that thing off completely. the 0.01 mpg you saved is not worth the constant on/off excessive wear/tear caused on the engine at every stop. just my opinion.
#64
Moderator
Thread Starter
You have to turn it off every time you start the car? i mean truck?
You might want to ask your dealer to see if they can reprogram it so it remembers the last setting before you turn off the car.
My 13 335i did that, dealer did a 1 time program, so it would remember where I left off.
If you bought the car, i would definitely turn that thing off completely. the 0.01 mpg you saved is not worth the constant on/off excessive wear/tear caused on the engine at every stop. just my opinion.
You might want to ask your dealer to see if they can reprogram it so it remembers the last setting before you turn off the car.
My 13 335i did that, dealer did a 1 time program, so it would remember where I left off.
If you bought the car, i would definitely turn that thing off completely. the 0.01 mpg you saved is not worth the constant on/off excessive wear/tear caused on the engine at every stop. just my opinion.
![Nod](https://acurazine.com/forums/images/smilies/nod.gif)
![Yes](https://acurazine.com/forums/images/smilies/yes.gif)
#66
AZ O.G NoOldManVetteOwner
Never got to say Congrats. Best of luck to you and the wife with the new truck and the business. Truck looks great
![Cheers](https://acurazine.com/forums/images/smilies/cheers.gif)
The following users liked this post:
00TL-P3.2 (10-10-2016)
#67
Moderator
Thread Starter
Got in my co-worker's Colorado last week & had to rib him a bit about his 'cute' truck being smaller than mine
![Chuckle](https://acurazine.com/forums/images/smilies/chuckle.gif)
#69
Moderator
Thread Starter
Appointment to get a LineX done in about 3 hours.
Not sure what I'll do next, thinking headlight upgrade. OE LED retrofit is near $2k
Not sure what I'll do next, thinking headlight upgrade. OE LED retrofit is near $2k
![EEK!](https://acurazine.com/forums/images/smilies/eek.gif)
#70
Moderator
Thread Starter
Line-X done. She said it's about 80% cured, nothing over 50lbs on it for 24 hours or it will leave flat spots in the texture.
![Name: 20161013_123637.jpg
Views: 674
Size: 112.7 KB](https://acurazine.com/forums/attachments/car-talk-5/58531d1501319049-britman-gertish-its-mini-20161013_123637.jpg)
![Name: 20161013_123648.jpg
Views: 717
Size: 155.6 KB](https://acurazine.com/forums/attachments/car-talk-5/58532d1501319049-britman-gertish-its-mini-20161013_123648.jpg)
They did a fantastic job, about 90 minutes start to finish. If anyone in Houston is looking for one, I'd re-use them for sure.
![Name: 20161013_123637.jpg
Views: 674
Size: 112.7 KB](https://acurazine.com/forums/attachments/car-talk-5/58531d1501319049-britman-gertish-its-mini-20161013_123637.jpg)
![Name: 20161013_123648.jpg
Views: 717
Size: 155.6 KB](https://acurazine.com/forums/attachments/car-talk-5/58532d1501319049-britman-gertish-its-mini-20161013_123648.jpg)
They did a fantastic job, about 90 minutes start to finish. If anyone in Houston is looking for one, I'd re-use them for sure.
The following users liked this post:
RPhilMan1 (10-14-2016)
#71
Ex-OEM King
Line-X always does an awesome job. It's a really good product for sure. The best part is that linings can be done in color as well as black.
#72
Team Owner
Looks good... very OEM.
#73
Moderator
Thread Starter
Got a quote (no tax & free shipping) for a Bak MX4 that's 200-250 less than most I've seen listed, tempting, but need to probably wait a bit before tossing another big purchase at the truck before its first note is even due ![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
Just need to get SWMBO approval![Spanky](https://acurazine.com/forums/images/smilies/spankie.gif)
Will have to frame it as, it'll make our couple road trips (Albuquerque & CO Springs in Nov & Dec) easier, since we'll be in the snow & won't have to worry about weatherproofing the luggage.
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
Just need to get SWMBO approval
![Spanky](https://acurazine.com/forums/images/smilies/spankie.gif)
Will have to frame it as, it'll make our couple road trips (Albuquerque & CO Springs in Nov & Dec) easier, since we'll be in the snow & won't have to worry about weatherproofing the luggage.
![Ponder](https://acurazine.com/forums/images/smilies/ponder.gif)
#75
Moderator
Thread Starter
Thinking about a headlight upgrade to dress up the front end & move to either HID or LED over the mediocre halogens, to be followed up with a plug & play Morimoto foglight upgrade.
The 2 I'm considering below:
Aftermarket Dual Projector
![](http://www.f150forum.com/attachments/f118/426930d1460939436-2015-anzo-headlights-img_0445.jpg)
OEM LED
The 2 I'm considering below:
Aftermarket Dual Projector
![](http://www.f150forum.com/attachments/f118/426930d1460939436-2015-anzo-headlights-img_0445.jpg)
OEM LED
![](http://www.f150forum.com/attachments/f118/393303d1441247932-2015-f-150-halogen-oem-led-headlight-conversion-raptor-retrofits-w-pictures-img_1846.jpg)
The following 2 users liked this post by 00TL-P3.2:
CocheseUGA (10-21-2016),
RPhilMan1 (10-19-2016)
#76
Moderator
Thread Starter
Wife needed the truck for work today, car seats are in her Flex. Had to drive the Civic to work today, back in the real snail...Luckily, just for the day. Miss my truck
![Sad](https://acurazine.com/forums/images/smilies/sad.gif)
#77
Ex-OEM King
OEM LED fo sho. They just look so unique.
The following users liked this post:
RPhilMan1 (10-21-2016)
#79
Moderator
Thread Starter
The aftermarket are around $500, the OE LEDs are about $2k ![EEK!](https://acurazine.com/forums/images/smilies/eek.gif)
Definitely a 'down the road' upgrade.
![EEK!](https://acurazine.com/forums/images/smilies/eek.gif)
Definitely a 'down the road' upgrade.