BMW Montego 335(E92) / Accuair / Vossen CV5 / Carbon Fiber
#1
Instructor
Thread Starter
BMW Montego 335(E92) / Accuair / Vossen CV5 / Carbon Fiber
So I like to keep updated pics, I know some people like the last updated pics I put up. So for those wanting more here ya go. Keep a look out on Vossens website as more should be up soon.
One thing I don't like about my car...is no matter how much I adjust my rear coils they will never sit even. Trust me I've tried for like 3 days and I can't get both sides to sit the same. It bothers me b/c one side tucks better then the other.
Special shout out to:
Mike and the guys at Vossen for the awesome wheels. They look good and I think they keep the sporty/luxury look going with the bmw. The wheels are 20x9(+20)/10.5(+27) and I'm running 225/35 and 255/30 tires. (yes these tires are taller then factory and recommended tires, but it something I had to sacrifice in order to run stretch tires and have rubber)
Reno and Derek at Accuair for helping me get my AccuAir Stage 2 kit. I do have the AccuAir Elevel system. And I'm looking at getting the iLevel system also.
Zack at Universal Air Suspension for helping me with my Air Bags
now the pics.
this all I have for now....stay tuned for more!!!!
and make sure you subscribe b/c I still have a few boxes that need to be opened......
One thing I don't like about my car...is no matter how much I adjust my rear coils they will never sit even. Trust me I've tried for like 3 days and I can't get both sides to sit the same. It bothers me b/c one side tucks better then the other.
Special shout out to:
Mike and the guys at Vossen for the awesome wheels. They look good and I think they keep the sporty/luxury look going with the bmw. The wheels are 20x9(+20)/10.5(+27) and I'm running 225/35 and 255/30 tires. (yes these tires are taller then factory and recommended tires, but it something I had to sacrifice in order to run stretch tires and have rubber)
Reno and Derek at Accuair for helping me get my AccuAir Stage 2 kit. I do have the AccuAir Elevel system. And I'm looking at getting the iLevel system also.
Zack at Universal Air Suspension for helping me with my Air Bags
now the pics.
this all I have for now....stay tuned for more!!!!
and make sure you subscribe b/c I still have a few boxes that need to be opened......
#2
Moderator
Generally not a fan of the car sitting that low, but I presume that's just for the pictures. Looks like you've done top notch work on the car. Very nice.
#4
Instructor
Thread Starter
and I'm still trying to get a little lower Need new coils
#6
Moderator
#7
2004 Carbon Gray 3.5RL
Beautiful car!
Trending Topics
#8
Instructor
Thread Starter
#9
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
Lookin good!!
#11
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
I like it-nice air setup.
#13
Instructor
Thread Starter
#14
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 31
Posts: 17,431
Received 1,485 Likes
on
1,049 Posts
Whoa, very aggressive. I'd be afraid to drive with that setup, but it looks clean. Nice work.
#15
I guess I'm the only person who can't see the pics
rel="Lightbox"?attachmentid=915902&stc=1&d=1379733 832" border="0" alt="" class="tcattdimgresizer" onload="NcodeImageResizer.createOn(this);" />
rel="Lightbox"?attachmentid=915903&stc=1&d=1379733 832" border="0" alt="" class="tcattdimgresizer" onload="NcodeImageResizer.createOn(this);" />
rel="Lightbox"?attachmentid=915904&stc=1&d=1379733 832" border="0" alt="" class="tcattdimgresizer" onload="NcodeImageResizer.createOn(this);" />
rel="Lightbox"?attachmentid=915910&stc=1&d=1379734 813" border="0" alt="" class="tcattdimgresizer" onload="NcodeImageResizer.createOn(this);" />
rel="Lightbox"?attachmentid=18463&d=1371854829" border="0" alt="" class="tcattdimgresizer" onload="NcodeImageResizer.createOn(this);" />
rel="Lightbox"?attachmentid=915903&stc=1&d=1379733 832" border="0" alt="" class="tcattdimgresizer" onload="NcodeImageResizer.createOn(this);" />
rel="Lightbox"?attachmentid=915904&stc=1&d=1379733 832" border="0" alt="" class="tcattdimgresizer" onload="NcodeImageResizer.createOn(this);" />
rel="Lightbox"?attachmentid=915910&stc=1&d=1379734 813" border="0" alt="" class="tcattdimgresizer" onload="NcodeImageResizer.createOn(this);" />
rel="Lightbox"?attachmentid=18463&d=1371854829" border="0" alt="" class="tcattdimgresizer" onload="NcodeImageResizer.createOn(this);" />
#16
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 31
Posts: 17,431
Received 1,485 Likes
on
1,049 Posts
Pics still work fine for me.
#17
Moderator
iTrader: (3)
Looking good
#18
Senior Moderator
Nice E92. I'm also a fan of five-spoke wheels in general. Those Vossens look a lot like the SSR SP1s I run on my S2000. The difference is that the Vossens have that nice concave look to them.
Nice job!
Nice job!
#19
Instructor
Thread Starter
UPDATED:
Hey guys here are some of my pics from the Vossen photo shoot that was done a while back. So these pics doesn't show the new upgrades I have on the car. So I'm going to add to this thread hopefully by this weekend with the additions.
But special shout out to those who helped in this build:
Mike @Vossen - I love the wheels (check out their IG my car got over 23k likes @vossen)
Jay @JGMods - thanks for being able to fill my carbon fiber hunger (IG: @jgmods)
Powder_Werkz - for the powder coating work on my tank (check them out on IG powder_werkz)
Carlos @projektcars - for the R1 rotors and Posi-Quiet Brakes
My mod list as of now:
ENGINE:
Carbon Fiber Simota Intake
Magnaflow axle back exhaust
Cobb Tuning AP
VRSF Front mount intercooler
Custom Painted engine cover
SUSPENSION/BRAKES:
ACCUAir Stage 2 e-level (thanks to ACCUAir)
Viair 400C Compressor (x2)
Candy Red ACCUAir 5 Gallon Tank (thanks to Powder_Werkz)
Ksport Coil Overs
R1 Crossed Drilled/Slotted Premium Rotors
Posi Quiet Ceramic Brake Pads
WHEELS/TIRES:
20x9(+20)/10.5(+27) Silver Polished Vossen CV5
225/35/20 and 255/30/20 Sumitomo tires
Mevius Neo Chrome Lug bolts
EXTERIOR:
M-Sport Front Bumper
CPS Arkym Style Carbon Fiber front lip
M3 Side Skirts
JGMods Carbon Fiber Side Skirt splitters
Custom Non widebody M3 rear bumper
V-Style Rear Diffuser
Carbon Fiber Amuse/Ericsson style trunk
AC Schnitzer Roof Spoiler
INTERIOR:
Corel Red Interior
Brushed Aluminum Dash
BMW Sports Steering wheel
AC Schnitzer Pedals
I.C.E
Custom Fiber Enclosures wrapped in suede
10" AudioPipe TXX-APRD subs (x2)
Audiopipe GD-3001 Class D Mono Block
Check out the rest of the pics: http://www.vossenwheels.com/CarGalle...SCV5-1062.aspx
this is not a rigged shot. I was doing about 80-85 mph on this shot. And yes I did tear up some of my fender. This was a controlled setting.
This is one of the shots I found from Wekfest Houston this past weekend, you can see the splitters and the trunk (kinda)
here is a relatively bad picture of my new trunk set up:
Hey guys here are some of my pics from the Vossen photo shoot that was done a while back. So these pics doesn't show the new upgrades I have on the car. So I'm going to add to this thread hopefully by this weekend with the additions.
But special shout out to those who helped in this build:
Mike @Vossen - I love the wheels (check out their IG my car got over 23k likes @vossen)
Jay @JGMods - thanks for being able to fill my carbon fiber hunger (IG: @jgmods)
Powder_Werkz - for the powder coating work on my tank (check them out on IG powder_werkz)
Carlos @projektcars - for the R1 rotors and Posi-Quiet Brakes
My mod list as of now:
ENGINE:
Carbon Fiber Simota Intake
Magnaflow axle back exhaust
Cobb Tuning AP
VRSF Front mount intercooler
Custom Painted engine cover
SUSPENSION/BRAKES:
ACCUAir Stage 2 e-level (thanks to ACCUAir)
Viair 400C Compressor (x2)
Candy Red ACCUAir 5 Gallon Tank (thanks to Powder_Werkz)
Ksport Coil Overs
R1 Crossed Drilled/Slotted Premium Rotors
Posi Quiet Ceramic Brake Pads
WHEELS/TIRES:
20x9(+20)/10.5(+27) Silver Polished Vossen CV5
225/35/20 and 255/30/20 Sumitomo tires
Mevius Neo Chrome Lug bolts
EXTERIOR:
M-Sport Front Bumper
CPS Arkym Style Carbon Fiber front lip
M3 Side Skirts
JGMods Carbon Fiber Side Skirt splitters
Custom Non widebody M3 rear bumper
V-Style Rear Diffuser
Carbon Fiber Amuse/Ericsson style trunk
AC Schnitzer Roof Spoiler
INTERIOR:
Corel Red Interior
Brushed Aluminum Dash
BMW Sports Steering wheel
AC Schnitzer Pedals
I.C.E
Custom Fiber Enclosures wrapped in suede
10" AudioPipe TXX-APRD subs (x2)
Audiopipe GD-3001 Class D Mono Block
Check out the rest of the pics: http://www.vossenwheels.com/CarGalle...SCV5-1062.aspx
this is not a rigged shot. I was doing about 80-85 mph on this shot. And yes I did tear up some of my fender. This was a controlled setting.
This is one of the shots I found from Wekfest Houston this past weekend, you can see the splitters and the trunk (kinda)
here is a relatively bad picture of my new trunk set up:
#20
Moderator
iTrader: (3)
Gorgeous
#21
Senior Moderator
Definite head turner.
#24
Chapter Leader (Southern Region)
That's wheirdh.. I see a lot of mods but I don't see a juicebox mentioned..
#25
Team Owner
#26
Chapter Leader (Southern Region)
#27
Instructor
Thread Starter
#29
Moderator
#30
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Outstanding.
#31
I drive a Subata.
iTrader: (1)
That's a $ shot. Nice one.
#33
Instructor
Thread Starter
thanks guy I appreciate it...its been a long 3 years. haha. I'm looking to get back in a TL for a daily. Looking so hopefully stay tuned for that build also.
#34
Someday, an RS6 Avant+
I love the color, and the wheels are quite nice. Ever thought of HRE wheels? Maybe like this:
Or this? Just some thoughts....
Or this? Just some thoughts....
Last edited by mrmako; 12-23-2013 at 12:24 PM.
#35
Instructor
Thread Starter
Yes I have thought about HRE....but then I think about HRE prices and I start thinking other things. I love my Volks and I've been thinking to get them refinished since I cant sell them. But I've had thought of other wheels, Works, SSR, D2Forged, and ForgedLine. But I can't do that much until I sale the Volks
Thread
Thread Starter
Forum
Replies
Last Post
neuronbob
3G RLX Tires, Wheels & Suspension
23
07-16-2019 10:48 AM
LogicWavelength
3G TL Photograph Gallery
33
11-01-2015 09:38 AM