The 50 Greatest American Sports Cars of All-Time...
#41
Running gag on LS1tech... and other F-Body forums too.
#42
Three Wheelin'
It was almost the same as the NA 4.3 in every way. No relation to the 3.8L. They don't share a single part.
The "turbo" 3.8L got a rolled fillet crank but it was the same NA casting. It got beefier "turbo" pistons with an iron insert but they were still cast. Otherwise the turbo 3.8L and non turbo 3.8L were the same. We just got lucky that the anemic 110hp NA 3.8L was severely overbuilt and required very little for turbo use. Even the heads are identical except the turbo heads don't have the valve guide area machined to accept exhaust valve seals and they got inconel exhaust valves.
The 4.3L on the other hand would only touch on 400hp before it needed good internals. The rods were the biggest weak link. The strong point is a set of upgraded heads and some internals were cheaper than the Buick stuff but until you're deep in the 10s, the 3.8L did not need upgrades.
The "turbo" 3.8L got a rolled fillet crank but it was the same NA casting. It got beefier "turbo" pistons with an iron insert but they were still cast. Otherwise the turbo 3.8L and non turbo 3.8L were the same. We just got lucky that the anemic 110hp NA 3.8L was severely overbuilt and required very little for turbo use. Even the heads are identical except the turbo heads don't have the valve guide area machined to accept exhaust valve seals and they got inconel exhaust valves.
The 4.3L on the other hand would only touch on 400hp before it needed good internals. The rods were the biggest weak link. The strong point is a set of upgraded heads and some internals were cheaper than the Buick stuff but until you're deep in the 10s, the 3.8L did not need upgrades.
Is the 278 Buick Stage 2 block similar to the 4.3? The ones I've seen have had the Power 6 symbol cast into the side of the block which leads me to believe that they're different as well.
#43
Team Owner
Good info, thanks for posting that. I had always thought that the Buick 3.8 was an option for Sy/Ty owners when their block gave up the ghost. It's been a while since I've lurked on turbobuick.com.
Is the 278 Buick Stage 2 block similar to the 4.3? The ones I've seen have had the Power 6 symbol cast into the side of the block which leads me to believe that they're different as well.
Is the 278 Buick Stage 2 block similar to the 4.3? The ones I've seen have had the Power 6 symbol cast into the side of the block which leads me to believe that they're different as well.
The stage II blocks use 4 bolt mains, thicker cylinder walls, thicker deck, more meat in the main webbing, cam moved up higher to clear stroker cranks, I'm sure there's more but it's been 6 years since we assembled my father's stage II.
All production hardware (crank, cams, etc) can be stuffed into the stage blocks. On center blocks required an on center intake manifold and spacing of the accessories to align pulleys.
There was a stage I also which had the same features as the stage II but with 2 bolt mains. Unlike production blocks, there was material to drill the extra holes and convert to 4 bolts.
I also saw the rare Indy block one time at Duttweilers. Aluminum 6 bolt mains. I could pick it up and throw it with one hand lol.
Thread
Thread Starter
Forum
Replies
Last Post
cammy5
5G TLX Tires, Wheels & Suspension
2
09-04-2015 11:26 PM
Zonian22
Member Cars for Sale
1
09-02-2015 08:19 AM