SOLD: Work VS-XX 18x8 +38 18x9 +38 4x114.3
#1
CL in lawnmower status
Thread Starter
Work VS-XX 18x8 +38 18x9 +38 4x114.3
Category: Wheels & Tires
Price: $950
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Legend, Vigor, Other Honda/Acura
Location (State/Prov/Terr): Can-MB
Item Condition: Used
as in the title they are as follows:
bolt pattern is 4x114.3 (so 1st gen cl's, accords, early 90's 240s etc..)
2 of 18x8 +38
2 of 18x9 +38
They are not a mint condition set of wheels, they look good from a couple of feet away
As seen in the pictures there are some imperfections, and i have tried my best to take pictures of all the ones that i have noticed.
...But the fact of these wheels are that they are rare, i have never seen a full set for sale like these for sale in 4x114.3 bolt pattern.
And now onto the pics.
These are true Work wheels, they have Work bolts and work valve caps.
And now for the imperfections
my location is Winnipeg, Manitoba, Canada
Price is 950 obo USD buyer pays all shipping charges and paypal fees
Again price is obo, looking for offers, lowballers welcomethe worst i can say is no
any reasonable offers considered
PM me any questions or offers
Last edited by mitch14; 07-19-2010 at 07:07 PM.
#3
CL in lawnmower status
Thread Starter
check the thread with the tesfit pics
here https://acurazine.com/forums/1g-cl-1997-1999-56/mitch14-car-build-thread-yakima-rack-vs-xx-wheels-testfit-w-o-tires-few-pics-781364/
they shouldn't stick out, you can see for the rears they tuck just a little bit in. depending on how low you go and what tires on the rear you may need to roll/cut the fender lips a bit, and also depending on if you run or have to run spacers or not.
the fronts should fit pretty nice, i didn't drop it on wood on the front, so that one pic is with it in the air, so with camber it will tuck in a bit depending on how much camber you want to run
if i get a chance i might test them again and get more pics, but my camera is pretty shitty anyways
FYI my rear camber is about -3 degrees in that pic
...and if you want these wheels bad, let me know, i've also posted these in other forums, and they seem to be getting activity already
i would love to sell them to a first gen member, but money talks
here https://acurazine.com/forums/1g-cl-1997-1999-56/mitch14-car-build-thread-yakima-rack-vs-xx-wheels-testfit-w-o-tires-few-pics-781364/
they shouldn't stick out, you can see for the rears they tuck just a little bit in. depending on how low you go and what tires on the rear you may need to roll/cut the fender lips a bit, and also depending on if you run or have to run spacers or not.
the fronts should fit pretty nice, i didn't drop it on wood on the front, so that one pic is with it in the air, so with camber it will tuck in a bit depending on how much camber you want to run
if i get a chance i might test them again and get more pics, but my camera is pretty shitty anyways
FYI my rear camber is about -3 degrees in that pic
...and if you want these wheels bad, let me know, i've also posted these in other forums, and they seem to be getting activity already
i would love to sell them to a first gen member, but money talks
#8
CL in lawnmower status
Thread Starter
well you can rock anything, just will look different if you try to go to a really agressive wheel setup
thanks, i like your rg1's, just not enough to get them shipped up here
and guys let me know if you want these, i already have what sounds like a few serious buyers from zilvia, two pretty damn good offers, and another two guys asking for shipping quotes.
just waiting to see what they all say before i make a move
thanks, i like your rg1's, just not enough to get them shipped up here
and guys let me know if you want these, i already have what sounds like a few serious buyers from zilvia, two pretty damn good offers, and another two guys asking for shipping quotes.
just waiting to see what they all say before i make a move
#9
Rockin the D2! Purple Pwr
iTrader: (6)
well you can rock anything, just will look different if you try to go to a really agressive wheel setup
thanks, i like your rg1's, just not enough to get them shipped up here
and guys let me know if you want these, i already have what sounds like a few serious buyers from zilvia, two pretty damn good offers, and another two guys asking for shipping quotes.
just waiting to see what they all say before i make a move
thanks, i like your rg1's, just not enough to get them shipped up here
and guys let me know if you want these, i already have what sounds like a few serious buyers from zilvia, two pretty damn good offers, and another two guys asking for shipping quotes.
just waiting to see what they all say before i make a move
#10
CL in lawnmower status
Thread Starter
^ my thoughts exactly, but i thought i'd give you guys a chance, after refinishing, and with the right stance and whatnot i think someone could rival flip's cl with these.
and hey, i'm on here and i'm not broke ....hopefully i can get some good ones next, then i'll show you guys what's up
******
deposit received from a buyer on zilvia
awaiting final payment, if he doesn't come through, these will be available again on Sunday
thanks for the interest and the compliments
******
and hey, i'm on here and i'm not broke ....hopefully i can get some good ones next, then i'll show you guys what's up
******
deposit received from a buyer on zilvia
awaiting final payment, if he doesn't come through, these will be available again on Sunday
thanks for the interest and the compliments
******
#11
Rockin the D2! Purple Pwr
iTrader: (6)
^ my thoughts exactly, but i thought i'd give you guys a chance, after refinishing, and with the right stance and whatnot i think someone could rival flip's cl with these.
and hey, i'm on here and i'm not broke ....hopefully i can get some good ones next, then i'll show you guys what's up
******
deposit received from a buyer on zilvia
awaiting final payment, if he doesn't come through, these will be available again on Sunday
thanks for the interest and the compliments
******
and hey, i'm on here and i'm not broke ....hopefully i can get some good ones next, then i'll show you guys what's up
******
deposit received from a buyer on zilvia
awaiting final payment, if he doesn't come through, these will be available again on Sunday
thanks for the interest and the compliments
******
hmm, well look and see how many guys have brand name wheels....
You, Me, Flip, a2drangon.... not a lot of people....
most people have these weird brands?
#12
CL in lawnmower status
Thread Starter
^yup, you can now consider me off that list... for now
*******
wheels sold!!!
to a buyer on zilvia
Thank you to all those that replied and made offers
mods please close this thread, thanks
*******
*******
wheels sold!!!
to a buyer on zilvia
Thank you to all those that replied and made offers
mods please close this thread, thanks
*******
Thread
Thread Starter
Forum
Replies
Last Post
nuldabz
3G TL Tires, Wheels & Suspension
3
09-03-2015 05:49 PM