SYLKIE

iTrader: (1)

Category: Engine - Power Adders
Price: $3100
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): CL 2G, TL 2G, Other Honda/Acura, Type-S Model
Location (State/Prov/Terr): FL
Item Condition: Used

Sold my CL-S6 and so up for sale is a fully bolt-on complete 2nd Gen TL/CL or Accord performance kit with Comptech S/C, XS Power auto/6mt headers, AEM Water/Meth, and Greddy Emanage Blue complete with software, wire and boomslang, along with a bunch of other goodies listed below:

-Comptech S/C (has approx 30-40K miles on it IIRC. Just rebuilt it myself about 1k miles ago: cleaned, new bearings and allen head bolts, fresh oil and lubrication, and fresh gearbox resealing)
-HBP
-Custom welded intake elbow with Water/Meth nozzle already installed.
-XS Power Headers with the 6MT jog
-Upgraded Walbro fuel pump
-6 Denso IK22s (approx 5k miles on them)
-UR Underdrive Pulley (standard boost pulley for S/C was damaged, but you can use this underdrive crank pulley in combo with S/C HBP to get a lower (not sure exactly how much) PSI
-Power Steering pulley
-IceBox CAI (missing screws) with K&N filter, complete with cleaner and recharge oil
-Outlaw intake spacer
-Custom-fabbed battery tray for required smaller battery (batteries not included haha)
-Complete AEM Water/Meth kit (will include approx 3 gallons of Methanol if kit is picked up)
-Custom-fabbed braket/holder for water/meth tank
-Greddy Emanage Blue, complete with software CD, wire, and Boomslang harness, I have harness for Auto and 6spd.
-Oil/Fluid temp gauge (can be used for trans temps)

All items are in at least "good" condition. The S/C kit is missing a few bolts, but nothing that can't be picked up at Home Depot. Instruction manuals for all this stuff can be found online for DIY. Prefer pick up, but will consider shipping, however buyer responsible for all costs. I MAY sell kits/parts individually but I WILL NOT part out the kits so please don't ask. This kit is all you need to squeeze out tons of power from you 2nd Gen CL/TL! I dyno'd 314 WHP BEFORE the AEM water/meth kit. No idea about after. Kept my exterior totally stock and sleeper and surprised everybody off the line! This kit will fit CL-P, TL-P, CL-S6SPD, and Accord motors.

gnuts

iTrader: (1)

interested in the emanage blue. PM me a price if you're interested.

zeroicea

iTrader: (1)

Interested in the meth kit.

jwp1013

iTrader: (2)

pmed interested in headers

SYLKIE

iTrader: (1)

PM'd

bigg_86

iTrader: (1)

How much for the meth kit? Pm me

rush

iTrader: (1)

Interested in eblue & meth kit pm

yungone501

iTrader: (4)

I see that TL-S isnt listed in the fitment. Does anybody know why exactly this kit will not fit the Type S? Thanks.

gnuts

iTrader: (1)

It does say 2nd gen TL and CL including type S. The autos (TL or CL) will need a different elbow for the s/c. I think the autos might use a differnt voltage on the esm...not sure.

SYLKIE

iTrader: (1)

Correct. This will fit TL-P, CL-P, or CL-S6. TL-S and CL-S autos have a second VSA throttle body that requires a different kit. The CL-S6 doesn't have this secondary TB which is why this kit will work on it. ESM voltage can be adjusted a few tenths of a volt IIRC between Type-S and non-S. There's a thread on here somewhere about that...

rush

iTrader: (1)

I'll buy the harness & aem meth kit lmk

Palizboy

How much for the XS headers if you want to sell them separately that is?

AcuraTL 04

Is there a charge for Bahrain, I want to put supercharger on my car Acura TL 2004

SYLKIE

iTrader: (1)

Still not ready to part-out kits yet... haven't decided on prices either.

this blower kit is not compatible with '04 and up models...

rush

iTrader: (1)

Here's my cell # for harness & meth kith
302-757-0725

johndo18

I know you said you might not part out the kit but if you do i am also interested in the meth kit and emanage..thanks

SYLKIE

iTrader: (1)

Update- Full kit no longer for sale, parting out individual kits now, PM if interested...
Mods- please advise if this thread needs to be changed/closed.

Ron A

If the supercharger is no longer for sale, you should post a new thread for just the kits, since I'll need a price for the individual kits and a new thread would be less confusing.

If the supercharger is for sale, I can leave it open if you want to but you will need to post prices for the kits.

rush

iTrader: (1)

Iterated in aem meth kit & harness pls

SYLKIE

iTrader: (1)

Blower kit is still for sale, $2000. Everything needed for install (minus 51R battery) plus HBP, K&N filter and UR crank pulley.

Also:
-AEM Water-Meth kit (with progressive controller), 1 gal tank, inline filter, and custom-fabbed tank holder/pump guard: $390
-XS Power Headers with 6MT Jog: $200
-Emanage Blue with support tool software CD, laptop connection cable, and boomslang harness for 6MT: $400

SYLKIE

iTrader: (1)

^^shipping depends on location.

bigg_86

iTrader: (1)

whats the difference?

SYLKIE

iTrader: (1)

^no tank, no inline filter, no custom bracket. I'll include shipping on the aem kit too, meant to say that.

STGTLS

iTrader: (5)

Can you PM me your best shipped price to 84094 on the SC KIT? I dont need the emanage and Headers and Meth Kit.

SYLKIE

iTrader: (1)

PM'd

cleptosis

iTrader: (1)

still have headers pm me best price to 02120

SYLKIE

iTrader: (1)

Dropped:
AEM kit for $375 shipped
Emanage+harness+extras $375 shipped

Ruyguy331

pmed

DphAmT

Pictures and price for the CAI please?

SYLKIE

iTrader: (1)

not parting CAI, comes as part of the S/C kit

SYLKIE

iTrader: (1)

SOLD. Mods please close, thank you!