SPC Front Camber Kit
10-19-2009, 04:09 PM
#1
SPC Front Camber Kit
SPC Front Camber Kit: But boxed in a Eibach Kit
SPC makes the camber kit for Eibach.
My car is an Acura CL 1998 it should fit if one has stock control arms but if you do have aftermarket control arms there might be some modifications in order to fit snug.
Applications:
1997-1999 Acura Cl 2.2, 2.3, 3.0
2001-2003 Acura Cl 3.2
1996-1999 Acura TL 3.2
1999-2003 Acura Tl 3.2
Taken from the SPC Site
These adjustable upper ball joints make front camber adjustments for many vehicles with upper control arms. By replacing the factory ball joint, this sliding ball joint allows for greater changes than previously available. With an OE quality replacement ball joint, this sliding plate assembly is perfect for vehicles that have been lowered for performance, or retain the factory ride height. For changes greater than +1.5¡ check out our Extended Range Ball Joints.
Specialty Products' adjustable ball joints feature:
• Best clearance in the industry
• Exclusive "low-profile" design
• OEM strength built-in
Adjustment range: Camber -1.50 degree to +1.50 degree
Installation time: .6 hr/side
I have it on my car right now! but i will take it off once i get my new kit!
Kit is practical in Good condition! Installed on October 16, 2009!
There are some scratches from installation! but will not affect the car ride.
(WAS $130)Asking for $105 + shipping or OBO!
Located in Socal!
SPC makes the camber kit for Eibach.
My car is an Acura CL 1998 it should fit if one has stock control arms but if you do have aftermarket control arms there might be some modifications in order to fit snug.
Applications:
1997-1999 Acura Cl 2.2, 2.3, 3.0
2001-2003 Acura Cl 3.2
1996-1999 Acura TL 3.2
1999-2003 Acura Tl 3.2
Taken from the SPC Site
These adjustable upper ball joints make front camber adjustments for many vehicles with upper control arms. By replacing the factory ball joint, this sliding ball joint allows for greater changes than previously available. With an OE quality replacement ball joint, this sliding plate assembly is perfect for vehicles that have been lowered for performance, or retain the factory ride height. For changes greater than +1.5¡ check out our Extended Range Ball Joints.
Specialty Products' adjustable ball joints feature:
• Best clearance in the industry
• Exclusive "low-profile" design
• OEM strength built-in
Adjustment range: Camber -1.50 degree to +1.50 degree
Installation time: .6 hr/side
I have it on my car right now! but i will take it off once i get my new kit!
Kit is practical in Good condition! Installed on October 16, 2009!
There are some scratches from installation! but will not affect the car ride.
(WAS $130)Asking for $105 + shipping or OBO!
Located in Socal!
10-19-2009, 06:28 PM
#2
Advanced
Join Date: Aug 2008
Location: North Carolina
Age: 34
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
is it both right and left?
10-19-2009, 06:58 PM
#4
10th Gear
Join Date: May 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
bump for a good, honest seller.
10-19-2009, 07:08 PM
#6
Advanced
Join Date: Aug 2008
Location: North Carolina
Age: 34
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
what would total be for shipping to 27522
11-01-2009, 11:55 PM
#9
Volks FTW!!!
Join Date: Aug 2006
Location: TheWildWest
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
what is the part # for this?
11-19-2009, 04:31 AM
#13
Instructor
Join Date: Oct 2006
Location: San Diego, CA
Age: 39
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
interested, have question about control arms? i have an 03 TL with tein basics, are my stock arms fine with this set?
Thread
Thread Starter
Forum
Replies
Last Post
Yumcha
Automotive News
2
09-04-2015 08:03 AM
nuldabz
3G TL Tires, Wheels & Suspension
3
09-03-2015 05:49 PM
