SOLD! FS: heads, block and more from 01 J30A1 Accord
#1
2001 J32A2 6Spd Accord EX
Thread Starter
Join Date: Aug 2004
Location: Alhambra, CA
Age: 42
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
SOLD! FS: heads, block and more from 01 J30A1 Accord
I am planning to do a CL-S swap sometime in december (my winter break). So I'll be selling whatever comes out of my car from the swap. These parts are currently still in my car. I'm just posting this up ahead of time, if you guys are interested, it'll give you some time to save up. They won't be coming out of my car until December. Prices do not include shipping.
To see pictures of my Cylinder heads (with work done) and Intake manifolds: check out this LINK: http://www.v6performance.net/forums/...ight=head+work
Cylinder heads (with work done)
-Port and Polish (intake and exhaust ports)
-5 angle valve job
-Stainless steel valves
-Valves are swirl polished
-new (stock) valve springs (so far it only has about 5,000 miles on it)
-If you want the CL-S camshafts, it'll be an extra $180
=$700=
=$880 /w CL-S cams=
Stock Cylinder heads
-approximately 40k miles
-Took the cylinder heads off at approximately 40k miles
-Good condition
=$400=
Stock J30A1 Block
-Approximately 50k miles
-You can still drive your car while you have an extra block to build up.
=$600=
Intake manifold /w work done
-The interior of the intake runners are ported
-The exterior are polished
-both upper and lower plenum
=$400=
Stock intake manifold
-Both upper and lower plenum
=$120=
Stock Transmission, approximately 50k miles
-This transmission has been running with a tranny cooler since the beginning
so it should still be in good shape. The transmission is still running great with no problems.
-comes with tranny cooler and filter if you want them
=$900=
CL Type-S Throttle Body (64mm)
=$170=
RAZO RA91 Shifter
-Still in great condition
=$70=
There might be more parts, but this is all I can think of at the moment. If there's more i'll post it up later.
To see pictures of my Cylinder heads (with work done) and Intake manifolds: check out this LINK: http://www.v6performance.net/forums/...ight=head+work
Cylinder heads (with work done)
-Port and Polish (intake and exhaust ports)
-5 angle valve job
-Stainless steel valves
-Valves are swirl polished
-new (stock) valve springs (so far it only has about 5,000 miles on it)
-If you want the CL-S camshafts, it'll be an extra $180
=$700=
=$880 /w CL-S cams=
Stock Cylinder heads
-approximately 40k miles
-Took the cylinder heads off at approximately 40k miles
-Good condition
=$400=
Stock J30A1 Block
-Approximately 50k miles
-You can still drive your car while you have an extra block to build up.
=$600=
Intake manifold /w work done
-The interior of the intake runners are ported
-The exterior are polished
-both upper and lower plenum
=$400=
Stock intake manifold
-Both upper and lower plenum
=$120=
Stock Transmission, approximately 50k miles
-This transmission has been running with a tranny cooler since the beginning
so it should still be in good shape. The transmission is still running great with no problems.
-comes with tranny cooler and filter if you want them
=$900=
CL Type-S Throttle Body (64mm)
=$170=
RAZO RA91 Shifter
-Still in great condition
=$70=
There might be more parts, but this is all I can think of at the moment. If there's more i'll post it up later.
![Silv_Accord_V6 is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#3
2001 J32A2 6Spd Accord EX
Thread Starter
Join Date: Aug 2004
Location: Alhambra, CA
Age: 42
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Everything is SOLD ! Thanks.
![Silv_Accord_V6 is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
Thread
Thread Starter
Forum
Replies
Last Post