04WDPSeDaN

iTrader: (1)

This your perfect chance to pick up Acura brembo calipers for cheap.

What you get: Both front calipers with brake pad pins and top plate where pins slide over.

These are in Great working condition. The brake fluid inside is fresh since I flushed it not to long ago. Keeping the brake fluid in these will help when bleeding the brakes.


Reason for sale: The clear coat on these are peeling off. You can get them powdercoated for cheap, or you can strip off the rest of the clear coat and re-clear the calipers. I do not have the time to do this so I ordered new calipers from acura.

New Brembos from acura ran me $680.00. These are not cheap by any means.

My price for everything is $300.00 Thank you for looking.

Please take your time and look at the pictures.

sho_nuff1997

iTrader: (2)

You need a different spindel and the brake lines are different. That's off the top of my head.

04WDPSeDaN

iTrader: (1)

Yes to make this setup work on an automatic TL you would need a new hub assembly with the wheel bearing, Rotora rotors IF NOT mistaken you can use their stainless steel brake hose. Most important brake pads.

OTHER WISE to save you the cost on new calipers this would be a good place to start.

nazzteebone

will these fit a tsx 04-05

princelybug

iTrader: (16)

Yes, with the previously stated extra parts.

04WDPSeDaN

iTrader: (1)

All pm's replied

Nyght Rhyder 786

Will these fit with my stock tl wheels? i have a 06 tl

04WDPSeDaN

iTrader: (1)

I would believe they do since they make them for 04-06 6-speed guys from the factory with the factory wheels.

In other words I don't think they changed the wheels for 6-speed guys to clear bbk's and factory wheels on AT that don't clear bbks.

04WDPSeDaN

iTrader: (1)

All new pm's replied.

2Fast4you

iTrader: (1)

Will these fit a 03 cl-s?

04WDPSeDaN

iTrader: (1)

^ I doubt it, no idea.

FOR 3GTL guys

What you will need to make these work

-Brake pads
-Rotors
-Acura Hub assembly
-Lower brake line

-----
Brake pads you can get a set of hawks or aftermarket set for about $100.

I would get Rotora rotors not the one from the bbk kit the other group sale in which he only sells blanks, slotted or slotted and cross drilled.

Link:https://acurazine.com/forums/sponsored-sales-group-buys-10/rotora-slotted-drilled-slotted-rotors-special-cl-tl-tsx-324531/

Acura TL 3.2L (04-07) w/ Brembo caliper
- ROTORA Front Slotted Rotors - $225/pair
- ROTORA Rear Slotted Rotors - $165/pair
- ROTORA Front Combo Rotors - $290/pair
- ROTORA Rear Combo Rotors - $200/pair

Hub assembly usually at this point there should be a bunch of wrecked 6MT's. this would probably be the most expensive piece. You need to hub with wheel bearing.

As for the brake lines you will need probably this
01464-SEP-A50 HOSE SET, R. FR. BRAKE $24.24
01465-SEP-A50 HOSE SET, L. FR. BRAKE $24.24

For sure you need these
46335-SEP-A50 PIPE G, R. BRAKE $4.40
46336-SEP-A50 PIPE G, L. BRAKE $4.40

Link for them
http://www.acuraoemparts.com/delray/...All&vinsrch=no

lights

iTrader: (1)

mmm...tempted to do this mods....
i have an automatic and would love to upgrade this....

but then again, my SSR won't fit these brembo calipers...

LIPPSTUH

iTrader: (2)

OR you can get a custom bracket made.

04WDPSeDaN

iTrader: (1)

Oh wow, thanks! I didn't even think of that

Yeah custom made bracket would def run you cheaper than spending the money for a whole hub assembly with wheel bearings.

1 serious buyer so far these might be sold.

Phrosttz0

I bet you could get these to work if on a 99-03 tl/cl if you got the bracket for the rotora bbk, just an idea...

2Fast4you

iTrader: (1)

I will buy if you can confirm it will fit 03 cl-s

04WDPSeDaN

iTrader: (1)

No BBk's are direct bolt on in which you can use stock rotors and brake lines as is.

Unless the few exceptions

You spend 2k on a DIRECT BOLT ON bbk kit
Your car already has acura brembos and would like to swap calipers
You have BBK's and calipers bolt up to your hub/brake lines without modifications. With that said...

I doubt its "Direct" bolt on. This mod requires some assembly.

amk6453

iTrader: (1)

i'm thinking to get yours and paint it in RED and replace my stock black...

04WDPSeDaN

iTrader: (1)

$270 Certified bankers check or money order, take these brembs off my hands

04WDPSeDaN

iTrader: (1)

SOLD! close thread.