CLOSED: Massive Garage Sale!!! Stuff need to move gogogo
06-22-2015, 03:49 PM
#1
Safety Car
Thread Starter
iTrader: (7)
Join Date: Dec 2008
Location: San Jose, CA/ Charleston, WV
Posts: 4,045
Received 619 Likes
on
459 Posts
Massive Garage Sale!!! Stuff need to move gogogo
Category: Accessories
Price: $0
Private or Vendor Listing: Private Listing
Location (State/Prov/Terr): WV
Item Condition: Used
Everything is located in Charleston, WV
set of winter rims. Rims are MB weapons 17 x 7 tires of Hankook ice pike 409. Better pictures later with more dent on tread life. It will come with the tire bags. (600 pick up, willing to meet 2 hours away or split cost of shipping)
Harbor freight jack and jackstand combo (60 bucks pick up)
torch (5 buck pick up)
Tl-s Magnesium valve cover (will be painted red, they are just primed now). They are extremely light (half the weight of stock aluminium valve cover). It will also come with a free PCV valve. (100 shipped)
Both Pre-Cats for California based car Fits accord 03-07 and TL/s 04-08. Will car from other state also. Just emission wise its based on california standards. (150 shipped)
Accord v6 03-07/ TL/s 04-08 Throttle body. Used the motor for an experiment. Was also polished kinda (not by me) Could be used as core to send to maxbore (20 shipped)
Fender Roller (used twice) Had to get new hardware because the one that came with it sucked ass (60 shipped)
Trending Topics
06-23-2015, 09:38 AM
#10
Safety Car
Thread Starter
iTrader: (7)
Join Date: Dec 2008
Location: San Jose, CA/ Charleston, WV
Posts: 4,045
Received 619 Likes
on
459 Posts
PM me if you are serious. The valve cover will probably shave off 10-15lbs of the car front end. Its light as a feather compared to the stock one.
06-23-2015, 07:09 PM
#13
Safety Car
Thread Starter
iTrader: (7)
Join Date: Dec 2008
Location: San Jose, CA/ Charleston, WV
Posts: 4,045
Received 619 Likes
on
459 Posts
I will let you know. It rained before I could paint them. Stupid east coast weather. 5 mins it was sunny and next thing you know its raining cats and dog. I will try to get the pictures up Friday.
06-23-2015, 07:33 PM
#14
Jeff
iTrader: (3)
Join Date: Jul 2014
Location: Port City, New Brunswick Canada
Posts: 5,728
Received 815 Likes
on
726 Posts
yea It pissed out all day here too, summer has been crap here.. I just want to see them painted and then I will come to a conclusion based on that. Thank You.
06-24-2015, 02:52 PM
#18
Safety Car
Thread Starter
iTrader: (7)
Join Date: Dec 2008
Location: San Jose, CA/ Charleston, WV
Posts: 4,045
Received 619 Likes
on
459 Posts
Just to clarify the fender roller is a generic one from harbor freight. They stopped selling them. Don't know why. Maybe they got sued by Eastwood for ripping off their design???
06-24-2015, 08:30 PM
#22
Safety Car
Thread Starter
iTrader: (7)
Join Date: Dec 2008
Location: San Jose, CA/ Charleston, WV
Posts: 4,045
Received 619 Likes
on
459 Posts
will do. I don't work on Friday so lets see how the painting go. I would also like to bake the paint to get it fully harden before I ship it out. If you want the TB with the valve cover I will throw it in for 15. You just need to swap your stock motor and back plate over. I used the motor for testing on a zdx throttle body to try to fix the rev hang and resistance different between the zdx/TL-SHAWD throttle bodies. It was functional when I tested it on my car when it was stock. Still couldn't figure out how to pop the stupid bar off.
06-24-2015, 08:37 PM
#24
Safety Car
Thread Starter
iTrader: (7)
Join Date: Dec 2008
Location: San Jose, CA/ Charleston, WV
Posts: 4,045
Received 619 Likes
on
459 Posts
^ it will bolt on no problem if that is what you are asking. Just need to swap the internals over. If you have someone that can port and polish the TB close by you could use this for a spare.
06-26-2015, 10:29 AM
#28
Safety Car
Thread Starter
iTrader: (7)
Join Date: Dec 2008
Location: San Jose, CA/ Charleston, WV
Posts: 4,045
Received 619 Likes
on
459 Posts
OKay I send everyone a PM that wanted the fender roller. Not sure why my post are not sticking,
please leave me your paypal address so I can send that invoice over
please leave me your paypal address so I can send that invoice over
06-26-2015, 12:22 PM
#30
That's crazy cheap for a fender roller!
My experience with painting and then shipping is the protective material might mess up the finish. I'd just pick a price for the new owner to figure that out.
Good luck with the sales, man.
J.
My experience with painting and then shipping is the protective material might mess up the finish. I'd just pick a price for the new owner to figure that out.
Good luck with the sales, man.
J.
06-26-2015, 03:19 PM
#33
Safety Car
Thread Starter
iTrader: (7)
Join Date: Dec 2008
Location: San Jose, CA/ Charleston, WV
Posts: 4,045
Received 619 Likes
on
459 Posts
[SIZE="7"]Fender Roller has been paid for
Here are the valve cover pictures. They are textured red, not smooth like a powder coat job and not wrinkle like wrinkle paint. A good in between mix. Going to give it a few days to cure after baking before I do another coat over everything.
Winter tires/rims combo pictures will be up tomorrow. I am in the middle of moving right now.
Here are the valve cover pictures. They are textured red, not smooth like a powder coat job and not wrinkle like wrinkle paint. A good in between mix. Going to give it a few days to cure after baking before I do another coat over everything.
Winter tires/rims combo pictures will be up tomorrow. I am in the middle of moving right now.
. Text can't portray feelings.
06-27-2015, 12:25 AM
#38
Jeff
iTrader: (3)
Join Date: Jul 2014
Location: Port City, New Brunswick Canada
Posts: 5,728
Received 815 Likes
on
726 Posts
they look good, a little bumpy (orange peel like) but I'm sure after they settle and you smooth them out (another coat??) they'll look good, I'm still interested buddy
06-29-2015, 08:53 AM
#40
Safety Car
Thread Starter
iTrader: (7)
Join Date: Dec 2008
Location: San Jose, CA/ Charleston, WV
Posts: 4,045
Received 619 Likes
on
459 Posts
So valve cover are still up for grabs. I will try to weight them today. They are pretty light but the box I have to ship them in is pretty big.