Comptech Icebox with K&N filter and weather strip mod (for a nice airtight seal) - $140 for everything.



Cusco lower Type II bar, pretty scuffed up but still works. Its for chassis stiffening, and remember, it goes under the car - $50



SOLDCusco lower Type I bar, mild abrasions - $30


TSX stock tweeters - $20


SOLDNot An Ashtray - its... not... an... ashtray? Good condition, all tabs intact - $10


PAIR of 2004 / 2005 OEM headlights with JDM projectors - $150
These are not perfect, hence the low, low price. The guy who owned them before me clearly opened them at one point. I re-sealed them and they no longer condensate on their own, but they aren't exactly 'like-new'. Projectors are my addition, great shape, and probably worth this price alone. Lenses on the headlights are in OK condition, minor scuffing (not broken plastic) on 1 light. Detailed pics:





SOLDHondata IM gasket - $40


SOLDPowerRev (P2R) K24 Manifold gasket - $40


SOLDHonda OEM Accord Euro wind visors (JDM shit). - $40
These were installed briefly by me but removed and have been sitting around. They work good, I just didn't care for the look post-install. These are the high quality ones that attach with trim clips and 3M tape, unlike the weathertech visors that sit inside the window channel and ruin your good air seal. They will need new 3M body kit tape. $5 part.




SOLD2006 Helm's Electical Troubleshooting Manual - $40
This book is f'ing invaluable if you ever want to do electronics work. It has every pinout and a black/white pictures of every connector in the car. Its fantastic.


SOLD2004 - 2006 Helm's Service Manual - $60
This book has all the differences for the 04 / 05 / 06 models. Also an amazing general reference. If you have an 07 / 08 model, this will have everything except the TPMS system, but everything else on your car is like the 06.


Spoon Sports Replica Spoiler (Painted CARBON GRAY PEARL)- $120
I paid over $300 to get this and get it painted. Its fantastic. It does have 1 small crack in the fiberglass on the INSIDE. Not visible once installed, at all. Does not affect anything, but it is there. You'll need new 3M body kit tape to install it, that's all. Add $5 if you want me to include a roll for you.




(first pics show it before being installed, its just resting. when installed it sits flush, not just off as it does there. last pic its just dusty. still in great shape.)

SOLDBlack fabric OEM TSX floor mats. Like new set, these were my 'show' set, never saw much use. - $40
Rears are in similar conditions to the fronts, I just didn't snag a pic.



SOLDMaven Motorsports Shift knob - $60
New, never installed. Fits all recent Acura MT sticks. Direct screw on replacement. Hand designed by a resident Acura fanatic and produced in Canada. Sits low, good heavy feel... you'll love it.



RacingBrake 70/30 Street / Track Brake Pads - $120
Brand new, never opened, never installed, never even been out the shrink wrap. Purchased from our board sponsor HeelToe, but sold my car right after.





8ga Amp hookup kit - $25
Used, fine condition, some tape marks on wires. 2 in-line fuses and a new spool of turn on wire.


SOLDUsa Spec PA11-HON2y - $100
Just buy it. It doesn't do text but it won't fail on you like a Dice.


Dom's Unit, wired install version - $100
Best RGB converter you'll find anywhere. Best version made. Install DIY by me is available in Audio & Video section.

 

would you take 40 shipped for the heat shield? In co

 

I got dibs on the shift knob....PM Sent.

 

pm'd on visors

 

PM'd about the Cusco bar

 

PM'd you for Cusco bar and visors

 

dibs on floor mats

 

Floor Mats pending payment. Other items open.


All prices are as if picked up locally. I'm willing to ship for actual cost on the rest of the items. Some might be a bit expensive to ship, so stop sending me lowball offers for the Type II bar, mmk?

If you want me to ship you something, I'm going to ask that you submit me a shipping deposit of the estimated cost, and I will refund you any unused amount + a receipt upon shipping.

 

Also guys, I'm going to be out of town Wednesday afternoon through Sunday, so there will be a brief interruption in shipping. If you want something now, talk to me today or tomorrow and get payment in by Tues night. Everything else will ship when I return Monday the 25th.

 

ygpm about the cusco bar

 

is the dom a plug n play

 

no, not plug-n-play. Easy wired install. You can install it either in the passenger front kick panel or right at the navi unit itself. DIYs for both are posted in A/V.

 

2nd dibbs on the shiftknob.. just incase he falls thru.. but i doubt it =/

 

OK, out of sheer size & hassle, I'm not willing to ship the Cusco Type II bar. Sorry guys.

Anyone local to DC area, now is your chance. Just PM me.

 

Mike, does the usa spec work with the iPhone? Is it a direct plug into the headunit?

 

i guess i'll take the "not an ashtray" pm paypal info

 

in line for the visors....pm sent

 

Visors and Shift Knob are SOLD

CG, yes, it works great. I used it with my iPhone. As long as you keep the phone away from the radio itself (just not in the storage pocket below it) it won't induce any / much RF interference either. If you remember how I had it setup, I ran the cable to the center console bucket. That worked great for me.

acuratsx228, pm sent.

 

Forgot to mention: Cusco Type I SOLD also.

 

Did you overlook my messages? still interested in the gasket set.

 

pm sent!

 

man to bad you cant ship that Type II i would have been bought it...

 

Everyone,

I got called out of town a day earlier than I thought I was leaving. Unfortunately that means I didn't ship anything yet to you early birds who I told I would. I apologize, but I will get it out to you as soon as possible. I should be returning on Sunday, if so I will get everything out on Monday and contact you as soon as your items are shipped.

I have a lot of PMs to catch up on, I'll get back to the rest of you as soon as possible.

 

bump

 

Will the Cusco II bar clear the OEM Cat. Converter? Also, is the NOT an ASHTRAY thing still for sale? If it is available, I'll take it.

 

Mike, I'm taking the Spoon Replica from you. I might be interested in the Pads and Icebox as well.

 

those pads are for both front and back ??
how do you think they will do with stock rotors ??
i was thinking about buying new front racing brake rotors as well in the future
but i need new Pads as of right now front and back how are the racing Brake pads
i heard alot of ppl are using hawk pads with various different rotors how does the hawk pads compare to the racing brake ??

 

Update: All parts shipped except 1, sent an email to the unlucky customer. I will do my best to get it out tonight and get back to you.

Headlights: The projectors have now been sold separately. As a result, the headlight assemblies can now be had for $60 picked up. If you need them shipped, just realize it will be upwards of $50 depending on where you are. Do not expect $10 shipping here!

EurTSX: I sent you an email. If you want any of that stuff, please get back to me!

nycxtsx05: The pads are OEM size and will work with the stock equipment. I would contact our board vendor if you wanted more reassurance. Since I have not used these pads (they are brand new) I am unable to give you a good comparison. RacingBrake is an excellent company, I trust their equipment.

 

Not an Ashtray and both service manuals are sold.

 

Floor mats and both gaskets are sold.

 

USA SPEC device is now SOLD.



mod edit-everything posted as sold in this post and above has been added in first post.

 

pm'd.

 

what remains?

 

money sent

 

brake pads still available?

i believe they should fit in one of those 6$ flat rate boxs. lmk

 

Brake Pads and Spoiler are sold.

Still some goodies remaining!

 

Dom's Unit SOLD

 

Still got the type 2?

 

still have the icebox?

 

what's left???