LOGONZOJLS

Well, i wasn't sure that I was going to get rid of my car but things aren't going to work out for me. If anyone is interested in buying the car complete let me know asap, otherwise pretty much everything on my car is for sale w/the exception of the engine. It's just not too cost effective to sale that. I will accept paypal as long as you add the 3% to the totall cost. shipping will be determined when I go to ship it out.

Little details on the equipment for sale.

High Quality Completely Custom Turbo kit. only has 8k miles on it. Royal Purple synthetic always used, changed every 3k miles or less. GT35r dual floating ball bearing turbo, oil and water cooled. Turbo is capable of making 600hp. Everything included was in perfect working condition when it was hooked up no problems whatsoever. This kit will come with everything you need to hook the turbo up all the way down to the oil pan with the turbo oil return already tapped. There is a lot of custom parts made for this turbo kit and most kits don't come this complete. This setup cost me with all the parts and custom fabricatiion about 10k and its barely been used. I will help answer any questions for installing the kit via email or directly by my cell. Here is a list of whats included. If you have any questions you can call me directly at 631-680-4444 my name is Logan. Please email me for any questions at Logonzojls@yahoo.com with any picture request or other questions. I do have a lot of pictures of the kit on my cardomain site in the last couple of pages. A link to it is attached in my Signature at the bottom.

Garrett GT35r .63ex/.70cmp Turbo w/polished compressor housing
Custom fabricated turbo manifold 03+ Accord/TL 04+
Custom fabricated downpipe w/two 02 bungs welded in.
All ATP oil return/feed fittings and lines for turbo
Custom fabricated Intercooler Piping(black)
AEM Wideband O2 sensor and Guage
Turbo xs BOV RFL
Tial 44mm wastegate w/v-band flanges 4.6psi spring
Precision FMIC
RC 550cc injectors with clips
Custom Intake runners and Fuel rails for the RC injectors
Greddy electronic boost controller profec-b spec-II
Greddy turbo Timer
Denso Iridium Spark Plugs
Green 4" Air filter
Battery relocation wires, hardware and connectors(full kit)
Auto-meter ultralite II Boost Guage (30in Hg-Vac - 15psi Boost)
(2x)Auto-meter carbon fiber single Guage pod
All couplings and V-band's needed, included.
New DEI heat wrap for downpipe
Turbo Manifold and downpipe already completely wrapped with DEI heatwrap.
I will also Include the 3" full exhaust if you want it. It includes (2)Aero-turbine 2540i Mufflers and (1)Aero-turbine resonator It might be expensive to ship but the 3" exhaust is definitely a huge power gain for this setup. At 8psi you should be around 350whp and 325wtq at a bare minimum. I won't be surprised if whoever gets this kit makes over 400whp with 10psi easily.

$6000k FIRM+shiping




Custom Polished Intake manifold for 6spd
Will fit 04+TL/03+AV6
I can paint the top cover any desired color if wanted or just leave it the way it is.
$250.00 shipped w/exchange of your manifold.
Here is a picture for comparison of the Intake manifold





Ingalls Rear Camber kit V6 03+ Accord NEW
Brand new
$130.00 shipped

Custom Carbon Fiber Triple Guage pod(w/o guages)
Paid 1k dollars for this to be made. If fits on the center of the dash and should fit V6 and 4cyl's and its only been used for 7-8 months. this is the high light of my interior and everyone that gets in my car compliments on it.
$550.00+ship





Tien SS-p Coilovers used for 8k miles perfect shape and condition.
840.00 shipped



Brand new Clutch disc by Comptech. I have this left over from the Comptech Clutch Flywheel combo that I bought. I didn't use this because I bought a stage 3 from Spec.
$160.00 shipped


Auto-meter Guage set(3)Brand new
Ultra-lite II
-Air/Fuel guage-
-oil pressure-
-water temp-
I will try to add some pictures later but they are brand new, perfect condition.

$215.00 shipped


PIAA 998 turbojector projector Fog lights w/hid
I have 3000k mculloch HID kit custom wired. one of the fog lights lense is cracked a little, but barely noticeable and doesn't affect the light. comes with all the neccesary hardware.
$210.00 shipped



J35A5 bare block w/o internals Brand New 250.00+shipping



Also willing to trade my body kit for anyone interested in the NYC/Tristate Area. I am just trying to get my car back to stock so I can sell it or trade it in. I might entertain offers to trade my car but it depends on what it is. 77k miles on chasis, brand new all OEM acura 3.5 swap check out my mods list for everything else. engine has around 1k miles on new motor . Car sold as is for 20k, buyer pays all shipping charges. Let me know if you have any more questions.

Logonzojls@yahoo.com
cell:631-680-4444

Logan

BTW, If you need any references I have many on .net, I have been a member there for over 3.5 years. s/n is Logonzojls

Bigtuck

Do you know if the coilovers will fit an 05 TL AT?? If so Let's talk..

Ron A

CAUTIONARY ADVISORY

We advise all prospective buyers (or sellers) to be aware that this is either a new member or one with less than 50 posts, so please proceed accordingly and with caution.

This in no way reflects on the integrity of the buyer or seller. It is a standard notice we put in for these members buying or selling items of substantial value.

Ron A

I put the price for the new J35 block from your other thread in this thread. Let me know if you want to change anything. As far as I could tell, the block is the only thing in both threads. I usually don't like to have the same part in both threads, but I will leave it alone for now so you have a better chance of selling it.

LOGONZOJLS

Thanks, thats why I put it over here, the other thread has been dead for a while. Thanks again!


As for the Coilovers I am not sure if they will fit or not. I think I read at .net that the tsx is interchangable. so they might be. do some research and let me know.

Logan

MichaelBenz

iTrader: (2)

nice stuff.

EnvisionTL

I checked the Tein website and found that the rear set shares the same part numbers (TL and AV6) but the fronts are different.

Accord fronts
9/504
SC090-01250

TL fronts
12/671
SB120-01200

AV6/TL rears
6/336
SC060-01250

kgf/mm,lbs/in
Part#

Also, from what I remember, the Ksport coils for the AV6 will also fit the TL so it may fit. I don't know if anyone has tried this yet though. Just some numbers for potential buyers. If it is unnecessary then can an op delete this post please. If I only had 9 bills to spend I would try it.

littletruong

I vouch for logon, done business with him a couple of times and he is a great seller/buyer. Why you parting everything out man????!! And hey will that clutch fit our accords?? if so i might be interested. I need a new clutch. dibs btw. Whats the bulb size for the HID kit for your projector's on your fogs?

CL Platano

Thats crazy man you just got ride of the month on the other site..good luck with the sale

ACCURATEin

You wouldn't be interested in sellin the pillow ball mounts separate by any chance would you? Cause those gold mounts are a good match for the greddy strut bar and i'm lookin for the accord tein pillow ball mounts.

Nice setup under the hood...did you happen to get your car featured in any magazines?

speedr73

Longshot, but let me know if you would be willing to pull out that gt35r from the kit...I would be interested.

lookinco

I would be interested in the RC550 injectors with custom fuel rails.

LOGONZOJLS

Sorry bro, those need to go with the turbo kit. Otherwise whoever bought the turbo kit would have to buy some and get some custom work done. It would definitely take some time.

Again, I'd like to keep that with the kit. Sorry.

I am going to sell the coilovers complete. Never, attempted to get my car featured in a magazine, It would have been cool though.


You have dibs on the clutch. And yes it will fit the accord V6. If your interested it the fogs I will include a brand new wire harness for them. I can't remember the fog bulb size though... maybe H4


Thank you for the help with the sale.

Thanks



Also all PM's replied to.

L

Meek32v6

iTrader: (7)

Damn man. If I wasn't a teacher and had a better income I would for damn sure work something out with you. Good luck with the sell. Somebody has and is gonna have the first turbo 3rd Gen Tl on AZ

MichaelBenz

iTrader: (2)

Is the outside of the intake manifold the only part that is polished...or has the inside been polished too for greater flow? Interested.....but have 05 Auto TL....but I think they are the same.

littletruong

edit by mod Ron A: link deleted. Send a PM please.

LOGONZOJLS

All pm's replied.

MichaelBenz

iTrader: (2)

I dont PM...full box. See question above. Edit...just cleared some space for incoming.

LOGONZOJLS

The outside is polished, the inside is stock. Purely for looks.

97BlackAckCL

iTrader: (6)

I knew I knew that car from somewhere! Sucks you're parting bro, I'm interested in the j35 block

LOGONZOJLS

Probably won't be parting out the engine. It just won't be justified by the amount of work involved. Sorry

LOGONZOJLS

BUMP... Turbo kit still for sale. this will fit the TL!

broly

How come you don't have a front camber kit as well?

I don't get why people only have the back

do you have both? if so i'll buy

LOGONZOJLS

My front camber was not offset enough when lowered to justify buying the camber kit. sorry bro....

LOGONZOJLS

Bump for the turbo kit still for sale...price drop $5500 will fit 3gen TL!

LOGONZOJLS

BUMP for turbo kit...

italian_spak

thats a sick accord coupe

LOGONZOJLS

Thanks bro

JStoops

will the fogs fit a 1st gen CL?

LOGONZOJLS

fogs are already sold, wheels, turbo kit still for sale....I can't believe the turbo is still for sale with all the people in the 3gen soooo interested in getting a turbo....but nobody is interested in it.... all high quality parts...lol

littletruong

sent you a pm logon

LOGONZOJLS

bump! give me a call alex... 631-680-4444

littletruong

i'll give you a call as soon as i can.. been busy with work and getting ready for school again..

04accordcpe

iTrader: (3)

dude trust me, if i didnt already have my SC, i would have bought this thing off you the first day you had it for sale. i cant believe its not gone LOL

free bump for you

littletruong

i'm working on it sean.. hopefully i can pull something out of my azz lol

littletruong

Hey logan call me back when you get a chance, you were pretty busy so yea.. lets work this out!

LOGONZOJLS

bump

littletruong

hey logan you still have the 3 inch exhaust with it right?? You gonna include that also correct? i'll let you know whats up by the end of this week. But so far its looking good!

04accordcpe

iTrader: (3)

GL alex

littletruong

thanks sean, this is the only thing i have in my mind right now.. everything else is on hold