FS: Alpine MRD-M500 - AcuraZine - Acura Enthusiast Community

10-06-2004, 07:39 PM

#1

acuratsx03

Future Seminole

Thread Starter

Join Date: Sep 2003

Location: Plantation, Florida

Age: 37

Posts: 826

Likes: 0

Received 1 Like on 1 Post

FS: Alpine MRD-M500

Selling a USED Alpine MRD-M500 mono amp. Perfect working condition. Never given me any problems. Selling it because I'm replacing it with a 5 channel amp. First the features of this awesome amp, then the pics...

• 900W MAX Power
• 500W x 1 (2ohm 14.4V)
• V12 AccuClass-D™ Design
• Digital Control Center with LED Display
• Bass Engine® DSP:
- Parametric EQ
- Crossover
- Time Correction
- Subsonic Filter
- Phase Control
- Bass Compensator
• Remote Bass Knob or Remote Amplifier Control Center (RACC) ready
• STAR Topology
• 4 Volt Input Capability
• Integrated Wire and Screw Down Terminals
• Variable Turn-on Delay
• Safe Mode
Bass Engine®
Crossover Type : 24dB/Octave Low Pass - Digital
Low Pass Crossover Frequency (Selectable) : 30Hz - 200Hz (1/6 oct. Steps or Off)
Number of Time Correction Channels : 1
Parametric EQ "Width" (Selectable) : 0.5,1,2,3,4,5 ("Q")
Parametric EQ Frequency (Selectable) : 30 Hz - 160Hz (1/12 Oct. Steps)
Parametric EQ Level (Selectable) : ±12dB (2dB Steps)
Subsonic Filter Range : 15Hz - 50Hz (5Hz Steps) or OFF
Subwoofer Level Adjustment Range (With RUX-4180 or RUX-4280 Connected) : -15dB to 0dB (11 Steps RUX-4280)
Subwoofer Phase Control : Normal (0°) or Reverse (180°)
Time Correction Adjustment Range : 0 - 10 mSec. (0.1mSec. Steps)
8.5 Volt Input Capability
Alpine V12 PWM Power Supply
Bass Engine® DSP(Parametric EQ, Crossover, Time Correction, Phase Control, Subsonic Filter, Bass Compensator)
Blue Power Indicator
Control Pannel Cover
Digital Control Center with LCD Display (Voltage, Current, and Temp Indicator)
Integrated Wire and Mounting Screw Covers
Remote Bass Knob or Remote Amplifier Control Center (RACC) Ready
STAR Topology
Safe Mode
Top Mounted Controls
V12 AccuClass-D™ Design
Variable Turn-On Delay

Foot Print (WxHxD)in : 12-13/32" x 9-27/32" x 2-23/64"
Foot Print (WxHxD)mm : 315mm x 300mm x 60mm
Frequency Reponse : 20Hz-200Hz (±1dB)
Heat Sink (WxHxD)in : 12-13/32" x 9-27/32" x 2-23/64"
Heat Sink (WxHxD)mm : 315mm x 250mm x 60mm
Input Impedance : 10k ohm
Input Sensitivity (for rated power) : 0.5V to 4.0V
Signal to Noise (S/N) : 90dBA (referenced to rated power)
Speaker Impedance : 4 or 2 ohms (Mono)
Weight : 4kg (8lbs. 13oz.)
MAX Power (at 14.4V,EIAJ)

Per channel into 2 ohms : 900W x 1
RMS Power (at 12V,20Hz-200Hz)

Per channel into 2 ohms : 400W x 1
Per channel into 4 ohms : 200W x 1
RMS Power (at 14.4V,20Hz-200Hz)

Per channel into 2 ohms : 500W x 1
Per channel into 4 ohms : 250W x 1

Pics:

Buyer will receive everything that came with original box (i.e. manual, screws, etc.) MINUS the two little screws that lock down the folding face plate that reveals the buttons.
Not only does this amp look great, it delivers all the power you'll need.
Willing to let it go for $250 plus shipping.
First PM with asked price gets it. If you have any questions about this amp please feel free to email me at kenny_porras@hotmail.com OR if you have AIM you can IM me at kennyporras.
Thanx
kenny

Reply