FS: Advan Model V 19" Gunmetal w/ Nitto NT555 tires
08-31-2007, 01:42 AM
#1
K-Fed's Stunt Double
Thread Starter
FS: Advan Model V 19" Gunmetal w/ Nitto NT555 tires
Hey guys,
Been a longtime member of this board and probably still will be. My car is going to be kept, however it's primary driver will not be me as of this spring. As a direct result I am selling my beloved parts. I would like anyone to know that these parts being sold aren't being sold with urgency, infact it hurts to see them go; they will have no use but collect dust and I hope to get them in hands of loving owners.
First up for sale:
My Gunmetal Advan Model V's. They are 5x114.3 Bolt Pattern with a 45 Offset. They are 19x8. These rims are very rare and I have bought them first hand. On the inside of the rim is the hand signature of the person and plant they were made at. These rims took me nearly 2 years to find brand new and when they came, it was god damn well worth it. They come strapped with 90 percent tread (Even more probably) Nitto NT555 Extreme tires on all 4 tires. The tires are 225/35/19 tires so they're the best that money can buy.
How much do Iwant for these rims? 1500 Plus shipping and handling. They need minor refinishing (Will have pics tomorrow). If I pay to refinish them I'm asking 2000 plus shipping and handling (I Will obviously show you the pictures of the finished wheel before you pay and then I ship!).
I'm asking for 2200 even for the wheels.
One of the rubbers is gone but the other 3 are in great shape. The one that's gone is due to bulges in one of the wheels. I will SPLIT the cost of the extra rubber which costs 250, so I will deduct 125 off my price and sell the wheels for 2075 shipped
these rims clear any calipre without spacers!
Second up for sale:
My Brembo 13" Gran Turismo BBK. These are the Black Calipres and slotted rotors. They are in great condition. I have used them only for 3-4 months (As I have with the rims) and they are the best brakes I've had the privilege of using. I am asking a very fair price for these brakes. They cost me 2500 dollars new and now I'm selling for 1300 plus shipping and handling. I guarantee you will be satisfied. The brakes have no sign of wear and are in great condition.
Also, I have the Camber kits for both the front and back uninstalled and I'm asking 220 shipped for them?
Any interested buyers please post in this thread, pictures will be up on tomorrow when I can catch the light to show you everything I can find wrong with both products so your own personal scrutiny upon receiving will see that I was honest.
THanks
Edit by Admin Ron A 24Nov07-pics added
http://gallery.mac.com/broly#100008
Been a longtime member of this board and probably still will be. My car is going to be kept, however it's primary driver will not be me as of this spring. As a direct result I am selling my beloved parts. I would like anyone to know that these parts being sold aren't being sold with urgency, infact it hurts to see them go; they will have no use but collect dust and I hope to get them in hands of loving owners.
First up for sale:
My Gunmetal Advan Model V's. They are 5x114.3 Bolt Pattern with a 45 Offset. They are 19x8. These rims are very rare and I have bought them first hand. On the inside of the rim is the hand signature of the person and plant they were made at. These rims took me nearly 2 years to find brand new and when they came, it was god damn well worth it. They come strapped with 90 percent tread (Even more probably) Nitto NT555 Extreme tires on all 4 tires. The tires are 225/35/19 tires so they're the best that money can buy.
How much do Iwant for these rims? 1500 Plus shipping and handling. They need minor refinishing (Will have pics tomorrow). If I pay to refinish them I'm asking 2000 plus shipping and handling (I Will obviously show you the pictures of the finished wheel before you pay and then I ship!).
I'm asking for 2200 even for the wheels.
One of the rubbers is gone but the other 3 are in great shape. The one that's gone is due to bulges in one of the wheels. I will SPLIT the cost of the extra rubber which costs 250, so I will deduct 125 off my price and sell the wheels for 2075 shipped
these rims clear any calipre without spacers!
Second up for sale:
My Brembo 13" Gran Turismo BBK. These are the Black Calipres and slotted rotors. They are in great condition. I have used them only for 3-4 months (As I have with the rims) and they are the best brakes I've had the privilege of using. I am asking a very fair price for these brakes. They cost me 2500 dollars new and now I'm selling for 1300 plus shipping and handling. I guarantee you will be satisfied. The brakes have no sign of wear and are in great condition.
Also, I have the Camber kits for both the front and back uninstalled and I'm asking 220 shipped for them?
Any interested buyers please post in this thread, pictures will be up on tomorrow when I can catch the light to show you everything I can find wrong with both products so your own personal scrutiny upon receiving will see that I was honest.
THanks
Edit by Admin Ron A 24Nov07-pics added
http://gallery.mac.com/broly#100008
08-31-2007, 12:20 PM
#5
Columbia Univ. c/o 2004
Join Date: May 2005
Location: CA
Age: 43
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
what car is the BBK for? More importantly, will it fit a 3rd Gen. TL?
08-31-2007, 01:08 PM
#7
K-Fed's Stunt Double
Thread Starter
Should fit a 3rd gen TL NP. It's bolt pattern is identical (5x114.3) and from a Mechanic I was gonna sell these too I asked him if they would and he said yeah. SO Don't know
Trending Topics
08-31-2007, 01:19 PM
#9
B A N N E D
Join Date: Apr 2006
Location: bitch im from dade county
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
The brakes fit 3g tl just need different brake lines
09-01-2007, 08:08 AM
#12
Racer
Join Date: May 2006
Location: Toronto
Age: 43
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
I am interested in the RIMS, i am located in Toronto which should be less hassel than shipping from the US.
Last edited by BAPE head; 09-01-2007 at 08:08 AM. Reason: typo
09-01-2007, 10:27 AM
#14
Columbia Univ. c/o 2004
Join Date: May 2005
Location: CA
Age: 43
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by drtoth
Should fit a 3rd gen TL NP. It's bolt pattern is identical (5x114.3) and from a Mechanic I was gonna sell these too I asked him if they would and he said yeah. SO Don't know
Originally Posted by datzdaboi
The brakes fit 3g tl just need different brake lines
09-01-2007, 10:28 AM
#15
Columbia Univ. c/o 2004
Join Date: May 2005
Location: CA
Age: 43
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
I would like to see pics of the BBK too. Thanks.
09-01-2007, 10:18 PM
#16
B A N N E D
Join Date: Apr 2006
Location: bitch im from dade county
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
You could PM Excelerate and I believe he has the SS brake lines for the 3g tl
09-01-2007, 11:04 PM
#18
CLtypeSLOW-quit it. See Rule #5. I will always listen to valid comments but this is not enough to warrant any discussion. If you need more of an explanation send me a PM. I know you thought you were doing a good thing but I just can't allow it under these circumstances.
drtoth-I know you're pissed but that is not enough reason to post what you did. Just leave it up to me and hold back on comments like that.
desper-thanks for the comments. You are correct and what you said in both of your posts was good advice.
The thread has been cleaned and I hope it stays clean.
drtoth-I know you're pissed but that is not enough reason to post what you did. Just leave it up to me and hold back on comments like that.
desper-thanks for the comments. You are correct and what you said in both of your posts was good advice.
The thread has been cleaned and I hope it stays clean.
09-18-2007, 04:42 AM
#20
Cruisin'
Join Date: May 2006
Age: 38
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
will the bbk fit a 7th gen accord if so ill take it 
PM me! plz
PM me! plz
11-02-2007, 06:04 PM
#21
K-Fed's Stunt Double
Thread Starter
bump.
Depends on how big your rims are mezzer. My advans fit on them perfectly because they were 19x8.0 and 45 offset. They did not fit on my stock wheels.
Both are still up for sale and I'm still firm on my price but these do need to go. I can make SOME room or sweeten the deal (Pay half for shipping or something that's the mostI can do)
Please send me a tell I dont' check the boards much
Depends on how big your rims are mezzer. My advans fit on them perfectly because they were 19x8.0 and 45 offset. They did not fit on my stock wheels.
Both are still up for sale and I'm still firm on my price but these do need to go. I can make SOME room or sweeten the deal (Pay half for shipping or something that's the mostI can do)
Please send me a tell I dont' check the boards much
11-09-2007, 10:53 AM
#22
K-Fed's Stunt Double
Thread Starter
bump.
Pending sale on Cambers to Tl-A-Spec, he sent me a counter offer which I accepted so it's a matter of us meeting up and getting the sale done.
The rest of the stuff is for sale. Canadians can pay the equivalent dollar amount and will get free shipping on either the rims or brakes, that's nearly 50-60 dollars! It will be insured, trackable and quicker than standard!
Both the wheels _and_ brakes are now off the car as well so it's a matter of packing, shipping!
Pending sale on Cambers to Tl-A-Spec, he sent me a counter offer which I accepted so it's a matter of us meeting up and getting the sale done.
The rest of the stuff is for sale. Canadians can pay the equivalent dollar amount and will get free shipping on either the rims or brakes, that's nearly 50-60 dollars! It will be insured, trackable and quicker than standard!
Both the wheels _and_ brakes are now off the car as well so it's a matter of packing, shipping!
11-10-2007, 09:59 AM
#23
Banned
Join Date: Aug 2005
Age: 41
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
hey sorry about yesterday man... clear ur pm please
11-10-2007, 02:41 PM
#24
K-Fed's Stunt Double
Thread Starter
Bump. Ron please add these rims clear any calipre without spacers!
Also the BBK is in great condition I can send more pics for interested/serious buyers only. I will ship first if you're a legit person (Alot of history on this board/deal history)
Also the BBK is in great condition I can send more pics for interested/serious buyers only. I will ship first if you're a legit person (Alot of history on this board/deal history)
11-10-2007, 03:11 PM
#25
Originally Posted by drtoth
Bump. Ron please add these rims clear any calipre without spacers!
Also the BBK is in great condition I can send more pics for interested/serious buyers only. I will ship first if you're a legit person (Alot of history on this board/deal history)
Also the BBK is in great condition I can send more pics for interested/serious buyers only. I will ship first if you're a legit person (Alot of history on this board/deal history)
11-15-2007, 07:46 PM
#26
K-Fed's Stunt Double
Thread Starter
everything is still for sale, no buyers yet (One had unfortunate circumstances)
I'm still accepting USD for all the stuff so canadians get it for cheaper due to the dollar's strength
I'm still firm on my prices although I can cover shipping. This stuff must go, PM me if you're interested.
I'm still accepting USD for all the stuff so canadians get it for cheaper due to the dollar's strength
I'm still firm on my prices although I can cover shipping. This stuff must go, PM me if you're interested.
11-15-2007, 10:34 PM
#27
K-Fed's Stunt Double
Thread Starter
These brakes also fit 3rd gen TLs as do the wheels, can you add that to the Title ron? I checked the bolt pattern and these are bolt on wheels/brakes (Not camber though)
Thx
Thx
11-23-2007, 10:32 AM
#29
K-Fed's Stunt Double
Thread Starter
Yeah I got pics that I'm going to have ready. They looked sick Volly. Believe me if I was keeping my TL for a few more years I would have kept htem. I didn't want to sell them. I paid over 2k USD for these when our exchange rate was like .80 to 1 USD and I loved every second of the car. I am sending pics to all of those who want them please PM me. Brakes are boxed up securely in Packing Peanuts and a Certified Box with Styrofoam layers to protect the rotors during shipping. I am still asking a firm price on the brakes and rims.
Bump.
Please PM me if you have any Qs. This stuff has to Go. I am willing to ship first to reputable people as long as payment can be verified.
Bump.
Please PM me if you have any Qs. This stuff has to Go. I am willing to ship first to reputable people as long as payment can be verified.
11-24-2007, 10:00 AM
#30
K-Fed's Stunt Double
Thread Starter
http://gallery.mac.com/broly#100008
Here are the pics.
Please ammend them in the original thread if possible ron. Thx
Here are the pics.
Please ammend them in the original thread if possible ron. Thx
11-24-2007, 12:08 PM
#31
Originally Posted by drtoth
http://gallery.mac.com/broly#100008
Here are the pics.
Please ammend them in the original thread if possible ron. Thx
Here are the pics.
Please ammend them in the original thread if possible ron. Thx
12-09-2007, 12:34 AM
#34
3rd Gear
Join Date: Nov 2007
Age: 36
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
im located in toronto
interested in seeing pics for the bbk
dont have much rep here. but i have rep on TorontoAccords, and 6GA
can you email pics to me at mickeyho [at] rogers dot com
thanks
interested in seeing pics for the bbk
dont have much rep here. but i have rep on TorontoAccords, and 6GA
can you email pics to me at mickeyho [at] rogers dot com
thanks
12-11-2007, 02:09 PM
#35
Cruisin'
Join Date: May 2006
Age: 38
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
do the bbk have some some sort of adaptors to bolt on to the suspension arms or do they just bolt on? if they have a caliper bracket then i might just need to get the bracket to fit my accord.
12-28-2007, 08:25 PM
#36
K-Fed's Stunt Double
Thread Starter
Bump I'm still alive.
They have no adapter to bolt on to the suspension arm. They're a bolt direct to the hub kit. You will only need a bracket I'm sure because I was inquiring about rears last year from the NSX brembos they said if you can fix the E-Brake all you'd need is a bracket. Let me know if you have any other questions. I'm confident they will fit.
Thanks.
They have no adapter to bolt on to the suspension arm. They're a bolt direct to the hub kit. You will only need a bracket I'm sure because I was inquiring about rears last year from the NSX brembos they said if you can fix the E-Brake all you'd need is a bracket. Let me know if you have any other questions. I'm confident they will fit.
Thanks.
01-06-2008, 10:25 PM
#40
5th Gear
Join Date: Jul 2004
Location: miami, FL
Age: 43
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
will the rims fit a TSX?