CLOSED: D2 8POT BBK and 17" XXRS Ingals and SPC camber kit + methanol kit AEM
09-09-2012, 11:28 PM
#1
D2 8POT BBK and 17" XXRS Ingals and SPC camber kit + methanol kit AEM
Category: Brakes
Price: $1200
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): TL 3G
Location (State/Prov/Terr): NJ
Item Condition: Used
First up is a BBK 8 pot front brakes (plug and play for automatic, manual I am unsure if they bolt right up but I do have automatic knuckles I can add to these for a complete fitment)..These are painted blue. I paid $2k for these and I am asking $1200. The price includes brake pads/calipers/caliper brackets/rotors and SS brake lines. Literally plug and play. They were used for less than a year.
Up next is a a pair of XXRs 522 chromium black. They are all 17" x 9's and offset is +20. with stretched tires. I am asking $600 plus stock, or $800 straight out. I want to get back to stock for winter and then next summer pick up a new set of rims. Yes these rims are $650-$750 shipped new but add tires and install to stretch them plus new valve stems and such...it comes out well over 1k.. I do not have pictures of them all at the moment but one has a small one inch mark and no heavy curb rash at all. Tires still have 90% left and no camber wear..
Here is a picture of them on a TL that we tested out. Did not have to roll the fenders. I believe these are 5 x 114.3 and 5 x 120 universal.
I am bringing my stance back to stock and I have an AEM methanol kit from when I had my comptech SC installed but never used it. It was installed, but never used/tuned with it.
I have the front SPC adjustable ball joint camber kit (both sides). These are already installed/pressed into the stock upper ball joints so the hard part is already done. I am asking $180 plus shipping (both camber kit and stock ball joints included).
I have the rear SPC upper adjustable control arm - $130 plus shipping and stock, or $140 plus shipping.
I have the rear ingals adjustable bars (2 for both sides) and I am asking $140 plus stock and shipping. I NEED stock back...
Last is the AEM 1 gallon methanol kit. It is never used and was installed. I also paid $400 and about $60 extra to run a line from the top of the tank to under the car for fumes (as they are toxic). I will remove this from my car within a week and will be ready for shipment.
I am asking $380 plus shipping. Perfect working order. Comes with tank and all parts needed for install. If you are local, I will give you a gallon of pure methanol as well ($15 value).
As always, no dibs..payment first. For the lower rear lower controls arms I will send you mine first, but to ensure I will get them back in a timely manner and can't have my car sitting for too long, I would require a $60 deposit which will be FULLY refunded once I get yours back.
09-10-2012, 07:24 PM
#7
1st Gear
Join Date: Nov 2010
Location: Peekskill, NY
Age: 34
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
lol are they +35 or +20? should same on the inside. How far away from Newark are you?
Trending Topics
09-10-2012, 07:35 PM
#8
1st Gear
Join Date: Nov 2010
Location: Peekskill, NY
Age: 34
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Also how much do they weigh?
09-24-2012, 01:40 PM
#16
Mods please add to title Ingals and SPC camber kit + methanol kit AEM
In first post please add:
I am bringing my stance back to stock and I have an AEM methanol kit from when I had my comptech SC installed but never used it. It was installed, but never used/tuned with it.
I have the front SPC adjustable ball joint camber kit (both sides). These are already installed/pressed into the stock upper ball joints so the hard part is already done. I am asking $180 plus shipping (both camber kit and stock ball joints included).
I have the rear SPC upper adjustable control arm - $130 plus shipping and stock, or $140 plus shipping.
I have the rear ingals adjustable bars (2 for both sides) and I am asking $140 plus stock and shipping. I NEED stock back...
Last is the AEM 1 gallon methanol kit. It is never used and was installed. I also paid $400 and about $60 extra to run a line from the top of the tank to under the car for fumes (as they are toxic). I will remove this from my car within a week and will be ready for shipment.
I am asking $380 plus shipping. Perfect working order. Comes with tank and all parts needed for install. If you are local, I will give you a gallon of pure methanol as well ($15 value).
As always, no dibs..payment first. For the lower rear lower controls arms I will send you mine first, but to ensure I will get them back in a timely manner and can't have my car sitting for too long, I would require a $60 deposit which will be FULLY refunded once I get yours back.
mod edit-added-but no more major changes like this please
In first post please add:
I am bringing my stance back to stock and I have an AEM methanol kit from when I had my comptech SC installed but never used it. It was installed, but never used/tuned with it.
I have the front SPC adjustable ball joint camber kit (both sides). These are already installed/pressed into the stock upper ball joints so the hard part is already done. I am asking $180 plus shipping (both camber kit and stock ball joints included).
I have the rear SPC upper adjustable control arm - $130 plus shipping and stock, or $140 plus shipping.
I have the rear ingals adjustable bars (2 for both sides) and I am asking $140 plus stock and shipping. I NEED stock back...
Last is the AEM 1 gallon methanol kit. It is never used and was installed. I also paid $400 and about $60 extra to run a line from the top of the tank to under the car for fumes (as they are toxic). I will remove this from my car within a week and will be ready for shipment.
I am asking $380 plus shipping. Perfect working order. Comes with tank and all parts needed for install. If you are local, I will give you a gallon of pure methanol as well ($15 value).
As always, no dibs..payment first. For the lower rear lower controls arms I will send you mine first, but to ensure I will get them back in a timely manner and can't have my car sitting for too long, I would require a $60 deposit which will be FULLY refunded once I get yours back.
mod edit-added-but no more major changes like this please
10-05-2012, 07:40 AM
#21
good luck with the rear arms, i just paid $330 bcuz my ingalls froze up during last winter and when the shop when to align my car they tried so hard they ripped the busings off of it. so i bought new rear control arm and rear lower control arm from the dealer.
Thread
Thread Starter
Forum
Replies
Last Post
MrHeeltoe
1G TSX Tires, Wheels, & Suspension
20
02-23-2023 01:54 PM
MrHeeltoe
2G TSX Tires, Wheels & Suspension
3
09-29-2015 10:43 PM
MrHeeltoe
3G TL Tires, Wheels & Suspension
0
09-28-2015 05:43 PM
