CLOSED! Parting out sale.
#1
Thread Starter
Team Owner
iTrader: (4)
Joined: Mar 2004
Posts: 37,115
Likes: 602
From: Landisville, PA
CLOSED! Parting out sale.
It was a good 2 years, but the CL is for sale. I'm parting out and everything is for sale. These are all off a 2001 CL-s.
Comptech headers. Will not fit a 6-speed. Price: $675 + shipping. ($700, shipped)
Obviously this is used and there is always some scratches. But all minor.
Comptech Icebox. Price: $140 + shipping. ($150 shipped). The price for the Icebox is low because the cage for the filter is damaged.
I had to pry it open to change the filter because the lower screw was stripped. I think you can buy a replacement cage from Comptech for about $50 to $75. The foam Icebox filter was swapped with a K&N replacement filter about 5K miles ago. The Icebox works great as is.
Comptech Axle Back Exhausts . Price: $250 + Stock Exhaust and shipping. ($300 shipped+ Stocks).
Will need your stock exhausts before I remove these. Would be better if the buyer is local. Again, these are used. But there is no real damage. Just needs to be cleaned.
NSX Calipers . Price: $375 + shipping. ($400 shipped).
Calipers are duel piston vs the stock single piston. They were installed for about 12K miles and I loved them. Definately an improvement over stock. The calipers were practically brand new when I got them.
Here's the thread I posted when I installed them. Pics are on here as well.
NSX Caliper Thread
Rotora Slotted Rotors F/R. Price: $250 + shipping.
These were used for about 12K. Not a hint of warp. After 12K my stocks were like a rolling mountain.
EBC Greenstuff Brake Pads. Price: $80 + shipping ($90 shipped).
Also used for about 12K. Low on noise and dust. They were about $120 new.
I will love to sell the brakes as a package and will offer it at a lower cost. PM me if buyer is interested. I may also have Comptech brakelines for sale as well.
Tein SS Coilovers. Price: $575 + shipping. ($600 shipped)
Dibs have already been called for these.
Used for 14 months. Not too sure what the miles were when I installed them.
Stock TSX Wheels and Tires. Price: $100 + Stock CL-s Wheels.
Will not ship. Have to be local sale. The tires have about 12K on them.
PM me for Pics or e-mail me at ravifos@yahoo.com.
NOTE: ALL PRICES ARE NEGOTIABLE. ALL SALES ARE FINAL AND PARTS ARE AS IS.
Comptech headers. Will not fit a 6-speed. Price: $675 + shipping. ($700, shipped)
Obviously this is used and there is always some scratches. But all minor.
Comptech Icebox. Price: $140 + shipping. ($150 shipped). The price for the Icebox is low because the cage for the filter is damaged.
I had to pry it open to change the filter because the lower screw was stripped. I think you can buy a replacement cage from Comptech for about $50 to $75. The foam Icebox filter was swapped with a K&N replacement filter about 5K miles ago. The Icebox works great as is.
Comptech Axle Back Exhausts . Price: $250 + Stock Exhaust and shipping. ($300 shipped+ Stocks).
Will need your stock exhausts before I remove these. Would be better if the buyer is local. Again, these are used. But there is no real damage. Just needs to be cleaned.
NSX Calipers . Price: $375 + shipping. ($400 shipped).
Calipers are duel piston vs the stock single piston. They were installed for about 12K miles and I loved them. Definately an improvement over stock. The calipers were practically brand new when I got them.
Here's the thread I posted when I installed them. Pics are on here as well.
NSX Caliper Thread
Rotora Slotted Rotors F/R. Price: $250 + shipping.
These were used for about 12K. Not a hint of warp. After 12K my stocks were like a rolling mountain.
EBC Greenstuff Brake Pads. Price: $80 + shipping ($90 shipped).
Also used for about 12K. Low on noise and dust. They were about $120 new.
I will love to sell the brakes as a package and will offer it at a lower cost. PM me if buyer is interested. I may also have Comptech brakelines for sale as well.
Tein SS Coilovers. Price: $575 + shipping. ($600 shipped)
Dibs have already been called for these.
Used for 14 months. Not too sure what the miles were when I installed them.
Stock TSX Wheels and Tires. Price: $100 + Stock CL-s Wheels.
Will not ship. Have to be local sale. The tires have about 12K on them.
PM me for Pics or e-mail me at ravifos@yahoo.com.
NOTE: ALL PRICES ARE NEGOTIABLE. ALL SALES ARE FINAL AND PARTS ARE AS IS.
#2
Damn Ravi, wanted the CT axlebacks, but don't got any stocks to offer you =/.
good luck w/ the sale.
good luck w/ the sale.
#4
Thread Starter
Team Owner
iTrader: (4)
Joined: Mar 2004
Posts: 37,115
Likes: 602
From: Landisville, PA
Originally Posted by Time For Sleeep
Damn Ravi, wanted the CT axlebacks, but don't got any stocks to offer you =/.
good luck w/ the sale.
good luck w/ the sale.
#6
what part of nj??
im at bergen county.
wanted Rotora Slotted Rotors F/R , EBC Greenstuff Brake Pads and Comptech Axle Back Exhausts. PM me.
If you are from Rutgers area or bergen i can go there and take a look.
Thanx.
im at bergen county.
wanted Rotora Slotted Rotors F/R , EBC Greenstuff Brake Pads and Comptech Axle Back Exhausts. PM me.
If you are from Rutgers area or bergen i can go there and take a look.
Thanx.
#7
ITS ALL ABOUT THE GLOW
Joined: Dec 2003
Posts: 8,916
Likes: 0
From: SOON TO BE BACK IN SHREVEPORT LA
DIBS on the exhaust without the stock
Trending Topics
#9
Will the NSX calipers fit a TL S? IF so i would willing to buy as a package, and i'll be in nj area next week with cold hard cash.
Last edited by Nyshadow; 05-16-2006 at 10:52 PM.
#10
#13
Originally Posted by RaviNJCLs
Sorry dude. If I sell them without the stock one Time For Sleep gets them. He called dibs 6 months ago.
#14
Im interested in the icebox. Can you send me pictures of the imperfection ur talking about above to my email? it's jeffyncs at gmail dot com
#16
Im interested in the rotora rears and the axle back exhaust. I'm in new brunswick, central jersey, exit, will give you my mufflers
#25
Thread Starter
Team Owner
iTrader: (4)
Joined: Mar 2004
Posts: 37,115
Likes: 602
From: Landisville, PA
Icebox Pics
There are already dibs on the Icebox. Here are the pics of the damage.
I played around with it a bit last night and got it to where ypu can attach all 3 screws. But I would still recommend not threading the lower screw fully. The top 2 have no problems. There are some scratches on the sides. But still looks and works fine. If the bottom screw is not threaded at all, there may be a 3 to 4 mil gap, which should not affect the performance of it. And if you thread it half way, there is no gap.
TOP:
BOTTON SCREW, THIS IS THE ONE THAT'S MESSED UP:
THE SCRATCHES ON THE SIDE:
BACK SIDE:
K&N REPLACEMENT FILTER:
OTHER PICS:
I played around with it a bit last night and got it to where ypu can attach all 3 screws. But I would still recommend not threading the lower screw fully. The top 2 have no problems. There are some scratches on the sides. But still looks and works fine. If the bottom screw is not threaded at all, there may be a 3 to 4 mil gap, which should not affect the performance of it. And if you thread it half way, there is no gap.
TOP:
BOTTON SCREW, THIS IS THE ONE THAT'S MESSED UP:
THE SCRATCHES ON THE SIDE:
BACK SIDE:
K&N REPLACEMENT FILTER:
OTHER PICS:
#29
#32
#33
#35
#37
Thread Starter
Team Owner
iTrader: (4)
Joined: Mar 2004
Posts: 37,115
Likes: 602
From: Landisville, PA
Originally Posted by Shaqs2002TLS
Would the headers and Teins fit on a 02 TL Type S?
The problem is they are as of now both sold. If the sale on any of them fall through, I will PM you.
#38