Hockeyman

My car is for sale in another thread, RON, feel free to close that since i'm trading it in this weekend.

If it is not listed here, then it is not for sale yet. All parts are for 2nd gen CL/TL unless stated otherwise. I do not have pictures or have time to take pictures right now, so please don't ask.


This could be the first and only one for sale on this forum
JDM Honda Saber Grill for 2002/2003 TL, one tab is broken but it does not effect anything. Comes with H emblem. Check out my threads in the photo gallery for pics. I paid nearly 500 for this straight from Japan. Only other person i know of with one is Hornda over on acurainspired.
$375 shipped.


Acura Legend Type II 2-piston FRONT calipers
Never put on my car, been sitting in my garage for a few months. These should bolt up to any TL/CL rotor for a cheap alternative to a BBK

$150 shipped

Rotora FRONT drilled/slotted rotors. Could use a resurfacing, unknown amount of miles on them i bought them used.

$125 shipped


Random Technology High Flow Catalytic Converter with o2 Extension wire
really good condition, used for 8k miles. Comes with hardware kit.
$165 shipped

Progress Rear Sway Bar for 2nd gen CL/TL or 3rd gen TL and TSX, adjustable from 22-24mm. Thicker than comptech. Good condition. Comes with Energy Suspension bushings.

$120 shipped

Comptech Front Sway Bar, OK condition.

$75 shipped

Take the front/rear sways together for 165 shipped.

Type S Intake Manifold, hand ported by me with a dremel.
$250 shipped

IMRC with cable and all hardware
$75 shipped

MSD RPM switch used to activate the second chamber for TLP/CLP with S manifold
$75 shipped

Take all the manifold stuff as a complete package for $375 shipped

Koni Yellow shocks, I am the second owner. 20k miles on them total.
$200 shipped

H&R springs model 50103, 20k on them, i am the original owner.
$125 shipped


I also have a TLS/CLS big bored throttle body, thing is it has a small crack in it but it doesn't affect the airflow. Complete with all sensors
$150 shipped.

Outlaw Engineering TB Spacers NEW IN BOX for typeS CL/TL
$85 shipped

AEM v2 CAI, has some cosmetic scrapes but it doesn't hurt anything. Comes with filter which needs cleaning.
$150 shipped.

Mugen Cooling Mods, Fan switch, thermostat, and radiator cap.
the fan switch and thermostat have never been installed.
$100 shipped

9006 Ebay HID kit, 3000k. works great
$100 shipped

2nd gen TL mudflaps with hardware
$20 shipped

My bodykit MIGHT be listed for sale depending if a local sale goes through, so please do not ask.

All prices are non negotiable right now, if i feel like something is overpriced, i will say so.

I will not be able to ship anything until this weekend.


As far as dibs goes, i will try to keep it first come, fist serve...but money talks. I know i'm going to end up with a lot of PMs but let's try and keep questions about my items in this thread, and keep PMs about sales only.

mrchan625

iTrader: (3)

do you have pics of the sways i might be intrested

Got_3.2?

iTrader: (2)

any pics of the calipers??

sifuacura

iTrader: (1)

by any chance does ur comptech sway bar fit 3rd gen tl? if so im interested and very local to u buddy lol

also are u parting out the rims? i would give u my stock in return and some $$ if interested

sifuacura

iTrader: (1)

ah dangit i saw ur other post about the rims, are the bent part letting air out?

BAPE head

The Sway's should fit the 3rd GEN TL, i currently have the 3rd GEN Sway on my 2nd Gen TL

97BlackAckCL

iTrader: (6)

Dibs on the calipers, pm sent

c0v3rr1d3

iTrader: (4)

are the calipers new or reconditioned in anyway, or are they just straight off a used legend?

FL3.2TL

Dibz on the V2.. Hockeyman, Ima send you a PM.

CL Platano

hmmm what do I want

VoLLy

iTrader: (8)

Dibs on the front/rear sways together for 165 shipped

Want to see some pics first.

PMed you man!

ryebreadisme

iTrader: (1)

Very interested in the high flow cat. Also maybe interested in the Mugen cooling mods. I'll send a PM later today. Definite dibs on the Cat.

Hockeyman

I'm definately interested in selling my old rims. They have some worn out tires on them and 3 outta 4 have small bends but all are holding air no problem. You can have each wheel repaired for 85 a pop which is what i was going to do later on this year but if you want them you can have them for $400. I do not need your stock rims in return, ridin on CLS rims at the moment.

The comptech front sway does not fit, but the progress rear does. People who want the package have 1st dibs so if Volly backs out you can have them.

Hockeyman

dibs recognized....shoot me a PM when you are ready..



All PMs have been replied

vthree

iTrader: (1)

your selling your car!?!?!?

nbennettksu

iTrader: (2)

dibs on IMRC

2000AcuraRL

What do you have that will fit my 2000 RL 3.5 liter?

Thanks Steve.

KaMLuNg

iTrader: (5)

whatever # dibs on the progress rear sway...

Blake what are u getting man???

JpnSamurai

i was suprised at that too.
interested in the TB spacers.

pmptx

Blake,

Dibs on

Koni
H/R
Cooling
Spacers

Give me a call. Local, no shipping. Give me a call-PM'd the #.

If the Centerlines are fixable, I would be happy to talk through those also.

Peter

Hockeyman

I can give you everything but the spacers, another local wants the spacers and talked to me this morning about em.


Message for everyone: Local gets priority and i will not ship to Canada

Hockeyman

ALL PMs replied

Hockeyman

nothing that i know of besides my rims which have already been called dibs on twice so you are outta luck my friend

sifuacura

iTrader: (1)

seem like me and u want the rims lol
closer person get the dibs right hockey?! lol

Hockeyman

is that how it works? haha....they fit better on a 2nd gen for sure, you might want to look for rims with lower offset. specs are 18x7 5x114.3 offset 42 Centerline Excels. They weigh 17.5lbs per rim without tire.

caligirl2k

I just sent you a PM

TheAznStyles

Hey bro clean out your pm box. I'm local in Dallas, you got time to meet up to see your goods?

S1CK TypeS

hey bro ill take the HIDs clear ur PM box ill PM u in the AM

Hockeyman

intake and spacers sold locally today. PM box cleared

KaMLuNg

iTrader: (5)

still waitin on an answer... throw a dog a bone man...

blak_wit_blak

dibs on the mud flaps

Hockeyman

all pms replied, sorry for not responding quickly i have been very busy and so many PMs are hard to go through

LeeDan00

you want to sell your headlights? let me know asap b/c i'm looking at another set. pm me back or send email to leedan00@gmail.com

TheAznStyles

I don't know? Kinda been busy with a lot of things.

The intake for TLp wouldn't fit a Type S correct?

Can you pm me with contact number seller? thanks!

S1CK TypeS

money sent for the HIDs

Hockeyman

HIDs sold, calipers pending.

97BlackAckCL

iTrader: (6)

Payment sent for calipers! Thanks man

AcUrAge703

are the sways sold.....whats still available????

VoLLy

iTrader: (8)

I have dibs on them, just waiting for some pics so I can paypal him.

AcUrAge703

yea i saw the dibs....was hoping it didnt go through since i didnt see a reply or any talking....but good looks anyway man...