CleanCL

iTrader: (4)

Double Din Radio Bezel - fiberglass, should fit all 2G CL/TL, it comes with 2 pieces of MDF to mount it properly, this was sold a few years ago by a vendor here that no longer makes these, custom install required, these were designed for the Kenwoods, but i think it would fit most double din units. $75+s/h





ClearBra Paint & Headlight Kit - kits are brand new, i'mnot 100% certain on what they cover, i believe it's partial hood, bumper, side mirrors, headlights, and fog lights.
$75+s/h for paint protection
$50+s/h for light protection
$100+s/h for both



Themoblok Intake Manifold Gasket - if you have the thermoblok spacer kit for the type s motor, and you are doing work on the manifolds, this is the gasket for the kit. gasket should be replaced when you remove it. brand new. $10 shipped



P2R Intake Manifold Thermal Gasket - brand new. $25 shipped



P2R Throttle Body Spacer - brand new. $100 shipped



O2 Sensor Extension - plug and play for rear o2 sensor for 2g cl/tl. this should be used for anyone buying the random technology cat that needs to extend their o2 sensor wires. brand new. $25 shipped



Rotora BBK Pads - used for only a few thousand miles. $50 shipped



Walbro Fuel Pump - used, drop in for the type s, i would guess it would work for any 2g cl/tl. $40 shipped



Boomslang AFC Neo Harness - plug and play for the type s automatic with the AFC NEO, brand new. $115 shipped



Innovative Motor Mounts - 1st gen front/rear, 2nd gen side mount, not sure on fitment, brand new. $200+s/h

Ron_A can you please close these threads, too much going on, rather have everything in one thread to keep it clean. Thanks.
https://acurazine.com/forums/car-parts-sale-361/closed-innovative-motor-mounts-cl-tl-brand-new-686858/
https://acurazine.com/forums/car-parts-sale-361/closed-p2r-throttle-body-spacer-thermal-gasket-plenums-brand-new-686856/
https://acurazine.com/forums/car-parts-sale-361/closed-fs-afc-neo-boomslang-pnp-harness-cl-s-brand-new-389469/

alxmlr789

iTrader: (1)

WIll those rotora pads fit a CL?

Front or rears?

Ron A

Threads closed. Thanks for listing the links.

CleanCL

iTrader: (4)

Sorry I forgot to specify, they are for the Front Rotora Big Brake Kit for 2G CL/TL. I believe the Accord uses the same pads. You can check with Rotora which kits use the same pads, their pretty universal.

victorvu

iTrader: (1)

pm'd

numairrr

Sorry, newbie here, but does the Boomslang AFC Neo Harness have any other function than working in conjunction with the AFC Neo? Also, d'you need forced induction to use this stuff on a TL-P?

Thanks!

CleanCL

iTrader: (4)

Bezel, P2R Gasket, P2R Spacer, and Walbro are all pending. If you inquired about these items and have not heard back from me it's because someone is pending payment. If I do not hear back from them by tomorrow, I will contact the next in line.

For the Boomslang Harness, you do not need forced induction. It is used to plug and play connect the AFC NEO versus having to splice all the wires into your car. This just plugs and unplugs.

CleanCL

iTrader: (4)

bump.

haven't sold anything mentioned in the quote... contacted people next in line but still have heard nothing.

Rajca

iTrader: (8)

only works with the neo. you dont need any fi. the neo will tune the car a bit more so you can release the hidden hp and tq.

any specs on the fuel pump?

'03TL-S

iTrader: (10)

For the DD bezel, does it fit with factory navi?

ntsif

Interesting in O2 Sensor Extension.
Please PM your paypal.

CleanCL

iTrader: (4)

it's the 255lph

it would... the bezel goes in place of the radio.

'03TL-S

iTrader: (10)

Are you sure because it seems like it's taking place of the temperature setting buttons for ppl with navi.

CleanCL

iTrader: (4)

taking a second look i believe you are right. been awhile since i looked at them.

O2 Sensor Extensions is SOLD.

DEPTLS

iTrader: (6)

what did you mean by

"Innovative Motor Mounts - 1st gen front/rear, 2nd gen side mount, not sure on fitment, brand new. "

are the Front and rear the mounts that everyone was sending back? or what? i'm just trying to understand why you put 1st gen and2nd gen. And I see your not sure on fitment, but do you at least have part numbers for the mounts?

CleanCL

iTrader: (4)

They are for a 2001 CL Type S Automatic... that's what I ordered for, so other than that vehicle I do not know for sure what else it fits. But I do know it should fit a range of vehicles, I just can't say 100% which years, I believe it should be 01-03 Auto, 99-03 TL Auto, but please confirm before purchase.

As for the description, the front and rear are the very first batch of mounts. The side mount is the second batch as there were fitment problems with the first production side mount. I never installed and never really followed the mounts after that. I thought the only issue was that the rear mount caused vibration.

victorvu

iTrader: (1)

whats left?

websters03

interested in double din trim. pm sent.

Rajca

iTrader: (8)

when u had the Walbro Fuel Pump installed did u have to get the car tuned or no?

CleanCL

iTrader: (4)

everything but the o2 sensor extension. sent you a PM with my paypal and price but never got a reply or payment?

replied.

nope, car runs fine.

alxmlr789

iTrader: (1)

Can that TB spacer be used with the 6 speed?

CleanCL

iTrader: (4)

Yes.

Rajca

iTrader: (8)

clean cl u got pm.

CleanCL

iTrader: (4)

Fuel pump is SOLD.

CleanCL

iTrader: (4)

ttt.

CleanCL

iTrader: (4)

ttt