FS: 99vtecaccord's garage sale... Dom Nav2go, 15mm Spacers, PS2, Winter Tires, & More
#1
99vtecaccord's garage sale... Dom Nav2go, 15mm Spacers, PS2, Winter Tires, & More
Category: Accessories
Price: $0
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): TL 3G
Location (State/Prov/Terr): TN
Item Condition: Used
Prices listed below includes freight cost
-Dom Nav2Go - $185
Currently on the vehicle. Will remove once sold.
-PS2 w/2 contollers and few games - $50
If purchased with DOM Nav2Go, will give addition discount.
-Ichiba 15mm wheel adapter - $100
Purchased last summer, but sold my wheels and no longer have use for them.
-Muteki Lug Nuts SR48 Purple - $55
Purchased last summer, but sold my wheels and no longer have use for them. Awesome color scheme... Lug key included
-04-06 TL Ballast w/ ignitor - $85
The ballast connectors has been altered for retro project. It fully functions with no problem. Great for any retro project. As for the ignitor, I believe one ignitor has a shortage... I cant seem to pin the problem.
-04-06 TL Base 17" Wheels equipped with Winter tires - Cooper Weathermaster S/T2 - $600
Bought these from westhaventl in December, but never had the chance to mount these on since winter in TN wasnt too bad. These are studless Cooper tires. Wheels are painted NBP, no bends or cracks. They do have minor crub rash.
wheel 1
wheel 2
wheel 3
wheel 4
-AEM v1 CAI Pipe - $30
The vibration mount on the pipe broke off. I figured someone could get a shop to weld the mount back on. (no other accessories will be included, brackets, filter and other items needed can be purchased through AEM)
-04-06 Base Aspec Rear Lip - $40 Pickup Only
Rear lip painted NBP. The lip has a minor crack from being rear ended. The crack is fixible.
-04 TL Stock projector lenses - $30
-04 TL OEM Rear Sidemarkers - $45
-04-08 Acura TL Chrome Emblem - $20
Trending Topics
#11
BANNED
iTrader: (33)
^yes sir! looking forward to it, thanks!
#15
I have never seen your car around knoxville before. Congrats on the soon-to-be engagement.
Did you run those spacers with the 3g TL wheels? I know you can run spacers where you change out the studs for longer ones but how about that type of spacer/adapter? Is there clearance on the back of the TL wheel to compensate for the OEM studs?
Did you run those spacers with the 3g TL wheels? I know you can run spacers where you change out the studs for longer ones but how about that type of spacer/adapter? Is there clearance on the back of the TL wheel to compensate for the OEM studs?
#16
I have never seen your car around knoxville before. Congrats on the soon-to-be engagement.
Did you run those spacers with the 3g TL wheels? I know you can run spacers where you change out the studs for longer ones but how about that type of spacer/adapter? Is there clearance on the back of the TL wheel to compensate for the OEM studs?
Did you run those spacers with the 3g TL wheels? I know you can run spacers where you change out the studs for longer ones but how about that type of spacer/adapter? Is there clearance on the back of the TL wheel to compensate for the OEM studs?
Simple.
#17
Yeah I know It's simple.
My question was do the tl wheels have indentions on the back of the tl wheels in order to compensate the OEM studs
My question was do the tl wheels have indentions on the back of the tl wheels in order to compensate the OEM studs
#18
BANNED
iTrader: (33)
the spacer goes over your hub (also goes over the studs) and you use the extended studs that are on the spacer for your 5lug wheel.
#19
Because if the tl wheels don't have space for the OEM studs to go then they wont sit flush on the hub. Can you take a picture of the back of the wheel and post it
#20
BANNED
iTrader: (33)
^you see the 5 holes in the spacer? that is where your "oem" studs go...then you use the extended studs for your wheels.
#21
Ok when dealing with spacers like the ones that you just sold they only work with a certain kind of wheel which is a wheel that has the back of the wheel cut out to compensate for how long the OEM studs are. The reason I ask is because I have the same spacers in 25mm (the spacer/adapter not the spacer that comes/needs extended studs)
With these types of spacers I could not just bolt them on and throw the TL wheels on unless during the casting process they were made with room in the back. The problem is the OEM studs are to long and they will bump into the back of the wheel causing the wheel to not be able to be secured onto the hub unless there are cut outs. Since I am new I can see where you might not credit anything I say however I've been doing this stuff for years and years.
So that is why I am asking for a picture of the back of your TL wheels so I can see if I can run my adpater type of spacer with the TL wheels.
With these types of spacers I could not just bolt them on and throw the TL wheels on unless during the casting process they were made with room in the back. The problem is the OEM studs are to long and they will bump into the back of the wheel causing the wheel to not be able to be secured onto the hub unless there are cut outs. Since I am new I can see where you might not credit anything I say however I've been doing this stuff for years and years.
So that is why I am asking for a picture of the back of your TL wheels so I can see if I can run my adpater type of spacer with the TL wheels.
#24
Banned
Join Date: Sep 2011
Location: Vancouver Wa
Age: 32
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Hey m intresting .. how much ?
Thread
Thread Starter
Forum
Replies
Last Post
JByron
Car Parts for Sale
7
01-08-2016 09:49 PM