Skier4lyfe303

iTrader: (32)

Category: Accessories
Price: $1
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): TL 3G
Location (State/Prov/Terr): CO
Item Condition: Used

As posted here:
https://acurazine.com/forums/showthr...7#post14778477

I have explained what happened to this car and why I am selling these parts. The majority of the parts (including brakes and suspension) were on the car for 5K miles.

DO NOT PM ME ASKING FOR OTHER PARTS NOT LISTED
SOME PARTS IN THE BUILD THREAD HAVE ALREADY BEEN SOLD OR ARE NOT AVAILABLE FOR SALE

RON A EDIT: HUGE THREAD SO I AM GOING TO ADD, FOR CLARITY AND BECAUSE I ALMOST MISSED THEM:

PICTURES ARE IN POST #2

PRICES ARE IN POST #3

Exterior
TL 07/08 Base & Type S Parts
07/08 Mirrors w/ extended wires painted AM (had a chip, been touched up)
07/08 Type S Rear license plate frame with chrome strip (this has been modified to fit 04’s)
07/08 Type S Rear bumper w/ Lip Painted AM (has some scratches on the lip, w/ hardware)
07/08 Type S Tail Lights & Sidemarkers (New driver light, everything else been clear bra’d)
These are the lighter version (I compared them to another set)
07/08 Type S Front Lip Painted AM (has some scratches comes with all hardware)
07/08 Type S Front Conversion Parts
Front Grille Mesh, Emblem, Hood trim (blemish), screws, pass fog cover

04-06 AM A-Spec Side Skirts (Pass and Driver Rear have scratches)

04-08 Sarona Roof Spoiler Painted AM (2 rolls of Loctite Powerband applied)

-New 07/08 C-Mod Grille Wrapped w/ an 04 OEM Hood Trim in Matte Black Vinyl- NEW
-Comes w/ C-Mod Hood Trim
-Fits BOTH Base and Type S

New Carbon Creations Hood, Wrapped w/ 1 piece of clear bra (top corners are peeling)

Suspension
Tein SS Coilovers w/ Type S Top Hats EDFC (this is a complete setup)

Ingalls Front & Rear Camber Kit
Front ball Joints on stock arms +/- 1.5
Rear Trailing arms

H&R Front and Rear Sway Bars STILL ON CAR

Ultra Chassis Bracing
Front Subframe Brace powder coated red STILL ON CAR
Side Floor Bars powder coated red
Rear subframe brace new in plastic

PCI LCA Spherical bearings in stock LCA’s

-Used in Good Condition Stock LCA Bushings

Engine Dress Up
OEM ITR Powder Coated J32A3 Valve Covers (These are one of a Kind) STILL ON CAR
Matching FLP for 04-08 TL can use with EDFC

Interior

Custom CF Wrapped OEM Interior Parts (one of a kind)
04-06 Cluster Bezel
04-08 Fuel Door release (was originally gray, not visible when installed)
04-08 Steering column (driver side has broken tabs, creates a small gap when installed)
04-06 Steering wheel buttons
04-08 Fuse Box Lid in engine Bay (has a scratch)
04-08 OEM CF Doors, driver vent, pass dash trim, center console rails

OEM Carbon Fiber Rear Vents (has a scratch on the corner)

OEM Trunk Net (for the side where Nav DVD player is, right if looking into trunk)
Engine
04-06 Gerzand PNP Intake Manifold w/ Maxbore TB (TB has machined shaft & Screws)
Comes w/ Both P2R TB & IM gasket
-Stock J32A3 Valve Springs & Retainers
-Stock J32A3 Crank
-Stock J32A3 Cams
-XLR8 Engine Mounts (65A Bushings) STILL ON THE CAR

Lights
04/05 JNC Headlights
-Darkness Theme (which I helped Create)
-Matte Black V2
-Fog Light Bulb Covers
-Gloss Black
-Bezel
-Chrome Strip
-Type S Diffuseres
-Real ZKW Lenses
-Hybrid TL Projectors
THESE WERE REPAIRED BY JNC and will directly ship from him
-Two outside tabs have been repaired, fully functional may be better than OEM
-The pass light tab broken and was repaired (this headlight is clear bra’d)
-The driver light was replaced with a used light
-Only the ZKW Lens and Type S diffuser were reused
-The lens has been refinished by JNC

Luminics Yellow H8 Fog Lights 12V 35W


Luminics Yellow 9006 Fog Lights

New Stock Bulbs that came with Depo Foglights


Wheels (No tires at this time)
TE37 SL 18X9.5 +22
Comes w/ Original boxes, stickers, valve stems, wheel covers
Can include: black center cap adapters, lug nuts below

-Racing Sciences Center Cap Adapters for TE37 SL with 73.1 Bore

-Used Rays Lug Nuts with key- Fake very Close to Real

-New Fake Rays Lug nuts in package with key

-Real Rays Lug Nuts & Valve Stems-Very Faded will need to be reanodized

-SSR Lug Nut Adapters- Allows you to use aftermarket lugs (acorn) with stock wheels (ball)


Brakes
Rear BBK Custom Red Power coat w/ matte black Acura decal
SS Lines, Bracket, Calipers, Pads, Slotted 2 Piece rotors

-Custom Red Powder Coated Brembo’s w/ matte black Acura Decals

-Stoptech FR (For Brembo) Cross drilled and Slotted Rotors
-127.40062RL with Silver Anti Corrosion
-Hawk Performance Brake pads- Part # HB530N.570
Other
Custom Cut Clock (fits 9500ci Radar Screen w/out blue cover)

Custom iPad Mini Bezel
Aux Port
iPad mini of your choice
Paint or Plasti Dip
Stretched AC Display

-2007-08 TL Ignition part (the black piece goes behind the immobilizer, this is not sold separately by Honda/Acura, sold only with the complete ignition)

-SuperComputers Automatic Brake Pedal with hardware (I only have the brake pedal)

-Base 3G TL Exhaust inserts

-Hondata Complete Plug and Play for 04/05 MT with 07 MT Type S ECU
-Either Send me your already cut Switchbalde
-Send me your stock key, I will reblade and recut the switchblade

-Fully Built Engine
Made 264WHP in Denver on a Mustang Dyno
-STILL IN THE CAR

Parts that are still on the car will be removed when the engine is taken out. I do not currently have a set date for this. Should be within the next month or two, some parts will come out sooner (valve covers, rear sway bar).

All Prices include Paypal fees & shipping to the lower 48 states unless stated otherwise
It may take me a few days to ship the larger items.

Pictures and pricing to follow

Skier4lyfe303

iTrader: (32)

Exterior
07/08 TL Mirrors Painted AM (had a paint chip, has been touched up)








07/08 Type S Rear License Plate Frame w/ trim- modded to fit 04


07/08 Type S Rear bumper w/ Lip Painted AM (has some scratches on the lip, w/ hardware)






07/08 Type S Tail Lights & Sidemarkers(New driver light, everything else been clear bra’d)












07/08 Type S Front Lip Painted AM (has some scratches comes with all hardware)














07/08 Type S Front Conversion Parts (hood trim has blemish)




07/08 TL Depo Fog Lights (Pass is glass with clear bra, driver is Lexan- not pictured)




04-06 AM A-Spec Side Skirts (Pass and Driver Rear have scratches)






04-08 Sarona Roof Spoiler Painted AM (2 rolls of Loctite Powerband Applied)




NEW 07/08 C-Mod Grille Wrapped w/ an 04 OEM Hood Trim in Matte Black Vinyl
-Comes w/ C-Mod Hood Trim (not pictured)
-Fits BOTH 07/08 Base and Type S
-One of the Bolt holders was shaved for CF hood





New Carbon Creations Hood, Wrapped w/ 1 piece of clear bra (top corners are peeling from putting it in the box, has a blemish towards the center)









Suspension
Tein SS Coilovers w/ Type S Top Hats EDFC (this is a complete setup)












Ingalls Front & Rear Camber Kit


H&R Front and Rear Sway Bars STILL ON CAR

Ultra Chassis Bracing
Front Subframe Brace powder coated red STILL ON CAR
Side Floor Bars powder coated rear
Rear subframe brace new in plastic



PCI LCA Spherical bearings in stock LCA’s


Used Stock LCA Bushings (one is perfect, the other has some cracking)




Engine Dress Up
OEM ITR Powder Coated J32A3 Valve Covers (These are one of a Kind) STILL ON CAR
Matching FLP for 04-08 TL can use with EDFC




Interior
Custom CF Wrapped OEM Interior Parts (one of a kind)
04-06 Cluster Bezel
04-08 Fuel Door release (was originally gray, not visible when installed)
04-08 Steering column (driver side has broken tabs, creates a small gap when installed)
04-06 Steering wheel buttons
04-08 Fuse Box Lid (has some scratches)
04-08 OEM CF Doors, driver vent, pass dash trim, center console rails











OEM Carbon Fiber Rear Vents (has some scratches)






OEM Trunk Net (for the side where Nav DVD player is, right if looking into trunk)


Engine
04-06 Gerzand PNP Intake Manifold w/ Maxbore TB (TB has machined shaft & Screws)
Comes w/ Both P2R TB & IM gasket
-Stock J32A3 Valve Springs & Retainers
-Stock J32A3 Crank
-Stock J32A3 Cams
-XLR8 Engine Mounts (65A Bushings) STILL ON THE CAR













Lights
04/05 JNC Headlights
-Darkness Theme (which I helped Create)
-Matte Black V2 and Fog Light Bulb Covers
-Gloss Black Projector Bezel and Chrome Strip
-Type S Diffuseres
-Real ZKW Lenses
-Hybrid TL Projectors
THESE WERE REPAIRED BY JNC and will directly ship from him
-Two outside tabs have been repaired, fully functional, better strength than OEM
-The pass light tab broke and was repaired (this headlight is clear bra’d)
-The driver light was replaced with a used light
-Only the ZKW Lens and Type S diffuser were reused
-The lens has been refinished by JNC











Luminics Yellow H8 Fog Lights 12V 35W


Luminics Yellow 9006 Fog Lights


New Stock Bulbs that came with Depo Foglights


P2R IM Gasket


Stock J32A3 Valve Train


Stock J32A3 Crank






Stock J32A3 Cams








Wheels NO TIRES THEY HAVE BEEN TAKEN OFF
TE37 SL 18X9.5 +22
Comes w/ Original: boxes,stickers, valve stems, wheel covers
Can include: black center cap adapters, used fake red rays lug nuts














Racing Sciences Center Cap Adapters for TE37 SL with 73.1 Bore


Used Rays Lug Nuts with key- Fake very Close to Real


New Fake Rays Lug nuts in package with key



Real Rays Lug Nuts & Valve Stems-Very Faded will need to be reanodized





SSR Lug Nut Adapters- Allows you to use aftermarket lugs (acorn) with stock wheels (ball)


Brakes
Rear BBK Custom Red Power coat w/ matte black Acura decal
SS Lines, Bracket, Calipers, Pads, Slotted 2 Piece rotors






Custom Red Powder Coated Brembo’s w/ matte black Acura Decals








Stoptech FR (For Brembo) Cross drilled and Slotted Rotors
127.40062RL with Silver Anti Corrosion


Hawk Performance Brake pads- Part # HB530N.570


OTHER
Custom Cut Clock (fits 9500ci Radar Screen w/out blue cover)








Custom iPad Mini Bezel
I can include the following
Aux Port
iPad mini of your choice
Paint or Plasti Dip
Stretched AC Display






2007-08 TL Ignition part (the black piece goes behind the immobilizer, this is not sold separately by Honda/Acura, sold only with the complete ignition)






SuperComputers Automatic Brake Pedal with hardware (I only have the brake pedal)


Base 3G TL Exhaust inserts


Hondata Complete Plug & Play for 04/05 MT
-Either Send me your already cut Switchbalde
-Send me your stock key, I will reblade and recut the switchblade

Skier4lyfe303

iTrader: (32)

-07/08 Mirrors Painted AM $350
-07/08 Type S License Plate Frame $130
-07/08 Type S Rear Bumper & Lip $500 NOT SHIPPED
-07/08 Type S Taillights & Sidemarkers $280
-07/08 Type S Front Lip $150 NOT SHIPPED
-07/08 Type S Conversion Parts $130
-07/08 TL Depo Fog Lights (Pass is glass with clear bra, driver is Lexan, I am getting shipped the driver light right now from repair, comes with pass Lexan) $175

04-06 A-Spec Side Skirts $190

04-08 Sarona Roof Spoiler $300

07/08 C-Mod Grille $220

Carbon Creations Carbon Fiber Hood $550 NOT SHIPPED

TEIN SS with EDFC $1250

Ingalls FR & RR camber kit $300

Ultra Side Lower Bars $200

Ultra Rear Subframe Brace $170

PCI in Stock LCA’s $320

Used Stock LCA Bushings $30

Custom CF Wrapped OEM Interior Parts (one of a kind)
04-06 Cluster Bezel $150
04-08 Fuel Door release (was originally gray, not visible when installed) $40
04-08 Steering column (driver side has broken tabs, creates a small gap when installed) $150
04-06 Steering wheel buttons $70
04-08 Fuse Box Lid in engine Bay (has a scratch) $50
04-08 OEM CF Doors, driver vent, pass dash trim, center console rails $400

OEM Carbon Fiber Rear Vents (has a scratch on the corner) $60

OEM Trunk Net $10

04-06 Gerzand PNP Intake Manifold w/ Maxbore TB (TB has machined shaft & Screws)
Comes w/ Both P2R TB & IM gasket $375
-Stock J32A3 Valve Springs & Retainers $125 OBO
-Stock J32A3 Crank $150 OBO
-Stock J32A3 Cams $150 OBO

JNC Headlights $600

Lumnincs 9600 Bulbs $20
Luminics H8 Bulbs $30

New H8 Bulbs $15

TE37 SL $3000

Racing Sciences Center Cap Adapters $115

Used Fake Rays Lug Nuts $40

New Fake Rays Lug Nuts $80

Real Rays Lug Nuts & Valve Stems Make an offer (must be above $120)

SSR Lug Nut Adapters $30

Rear WilWood BBK $900

Red Brembo’s- $160 plus your stock Brembo’s (you pay $500 and I will refund $340 once I receive your stock brembo’s back, must be in good condition)

Stoptech FR Rotors for Brembo Brakes $170

Hawk Brake Pads $75

Custom Clock for 9500CI $60

Custom iPad Mini Bezel (PM me for details, minimun $500)

07/08 Ignition part $15

SuperComputers Auto Brake Pedal $20

Base 3G TL Exhaust Inserts $20

Hondata- Complete Plug and Play $1400


I do not want to split parts up that have been listed as a set.
Parts that are still on the car will be priced once they are taken off

IIDXholic

iTrader: (5)

wow man looks like you put a lot of love in your car. GLWS I would buy some things but currently spending some money repairing the transmission

Ron A

This is a very well prepared thread, but I put a note in the first post which will be hard to miss, since I almost missed the pictures and prices and I'm sure someone else out there will wonder also and then we'll get a bunch of those worthless without pics smilies.

This is a huge project. I wish you good luck and will help all I can, which isn't really a whole lot due to the work involved.

Once the sale gets going, I suggest you post a list of what's left occasionally. After you make the first post, post the Post # of the preceding post when you post the new list each time and I'll delete the previous update post. Works quite well.

Bankz

That's a lot of good parts for sale, GLWS

TL Luver

iTrader: (2)

possibly interested in motor mounts but don't want to pay close to retail lmk... thanks...

also maybe just the type s hood trim... just the hood piece...

possibly the throttle body if your willing to separate...

handsom-hustla

iTrader: (3)

Rear bbk, valve covers highly interested!! Pm now..

azeezp13

iTrader: (4)

Wow so much good stuff here. I see you have the original J32A3 cams for sale.. not sure if you plan on taking apart your motor but I'd be super interested in your Type S Camshafts.

dc2kid

iTrader: (2)

do you have the oem carbon fiber trim for the front heater switch and cup holder area? pm me il buy that thanks

paperboy42190

iTrader: (7)

damn i wish you had done the type S seat conversion so i can buy some type s seats!

KLim604

This looks Absolutely Amazing!

I'm interested in the Ipad system. If I were to install it into my '04 Base TL, How do you know what temperature its at without the display?
Are you including the radio system?

Best of luck with the sale, Cheers!

Jware93

Im interested in the H8 yellow fogs and the rear driver side marker for the type-s if you'll willing to break that up. If not just the h8. And glws. You should do great with this. Make everybody Christmas lol

Tiggerx3

Do u got a pic of the cf pieces installed?

Tiggerx3

Pmed

EvilVirus

iTrader: (8)

Was the ECU bought new or used?

FCVadi

iTrader: (3)

damn dude, sorry to hear...

soo many nice things, dont even know what I would want

GLWS... I will be talking to myself to see what to get

Andy11891

Will u split lip from bumper? Please let me know. Thanks

cokorote

iTrader: (1)

Pm

tommyg55

Wish I had monies this would be perfect for me

gr8ness97

iTrader: (5)

PM'd you for the rear bumper combo.

tommyg55

How much modification to the base bumper is needed to make the from lip fit?

96cd5

Pm'd. All this good stuff it's a dream come true. To bad I'm not closer and richer.

jamiengyn

Interested in your Ingalls camber kit

von5t3R

iTrader: (2)

Pm'd Side Skirt

newkatbie

iTrader: (1)

Pm sent.

Grand_hustle17

Pre cat deletes?

Morrissey25

iTrader: (4)

What a nicely organized thread... I am seriously considering the OEM CF Doors, driver vent, pass dash trim, center console rails $400... Time to check the bank statement

swoosh

iTrader: (5)

great thread with great stuff...

dibs on the front and rear camber kit for a friend....

mikesku

iTrader: (6)

want the oem cf rear ac vent for sure.... interested in the 07/08 license plate garnish, you said it was modified to fit 04-06 models, but does it still fit on 07/08 models fine?


Posted from Acurazine.com App for Android

Morrissey25

iTrader: (4)

Ready to pay for 04-08 OEM CF Doors, driver vent, pass dash trim, center console rails for $400. Will send PM for paypal address.

Morrissey25

iTrader: (4)

Paypal sent for 04-08 OEM CF Doors, driver vent, pass dash trim, center console rails for $400... please confirm...

swoosh

iTrader: (5)

brother my dibs for the camber kit is off....the guy said he wanted to wait a little bit..

j_u

iTrader: (5)

Pmed for ipad bezel

MR_FRESHH

Pmd

Brandon Allen

Interested in throttle body if you are willing to separate.

NJALLDAY57

iTrader: (1)

Grille and hood shipped to 07095

PayPal ready!!!!

ebelp

Your ad says the CF steering wheel buttons and CF gauge bezel are for 04-06 TL's...does that mean all the buttons illuminate blue?

Skier4lyfe303

iTrader: (32)

They are listed as 04-06 because they will only fit 04-06. 07/08 TL's have different cluster bezels and different steering wheels which have different buttons. The buttons illuminate white like the rest of the car, not blue. There are only a few things that light up blue from the factory, such as the lights that point down towards the shifter.

Jz-tls

iTrader: (2)

Interested in the tein pm best price shipped to 95953