AcuraZine - Acura Enthusiast Community

AcuraZine - Acura Enthusiast Community (https://acurazine.com/forums/)
-   Car Parts for Sale (https://acurazine.com/forums/car-parts-sale-361/)
-   -   3G TL Parts/Accessories Garage Sale (2005) (https://acurazine.com/forums/car-parts-sale-361/3g-tl-parts-accessories-garage-sale-2005-a-758245/)

MichaelBenz 01-29-2010 09:31 PM


Originally Posted by thait (Post 11695089)
how much for the oem intake?

Let me dig it out first. I think its on top of the cabinets in my garage...so it should be an easy one!

MichaelBenz 01-29-2010 10:25 PM

Guys...my computer just crashed for good. Had the pics up and posted and ready to hit post and the god damn thing just totally crashed on me and wont restart. I am so pissed right now I dont GAF about anything right now and just need to walk away for a while. Sorry.

BTW...posting from my girlfriends PC and that pisses me off too.

I am just pissed right now and must walk away.

LTxArucAx60 01-29-2010 11:01 PM

man micheal you a busy guy, u do go into lots of detail which is good. I just spend some time reading post to post and man. But hey good luck with your sales. i use to have a carbon fiber engine cover (made by you)way back and sold it. Its a solid piece!

MichaelBenz 02-01-2010 01:34 AM


Originally Posted by LTxArucAx60 (Post 11695292)
man micheal you a busy guy, u do go into lots of detail which is good. I just spend some time reading post to post and man. But hey good luck with your sales. i use to have a carbon fiber engine cover (made by you)way back and sold it. Its a solid piece!

Thanks man. Welp...tried reformatting HD....PC is screwed! :yuck: I should have a new one monday and be back on the roll. Massive HD failure do to a HD controller crapping out.

mr.b 02-04-2010 09:00 PM

do u still have the tail lights?

MichaelBenz 02-06-2010 01:03 AM


Originally Posted by mr.b (Post 11713826)
do u still have the tail lights?

Yes.

MichaelBenz 02-06-2010 01:13 AM

Ok guys...got pics and it and they are downloading to my pc as I write this. The pics of the CF cover will be on here shortly.

$165 delivered. AckTL has first dibs on it as he got duped out of the last cover by someone else paying for it minutes before he was about to send payment. But at the same time....I cannot wait for a LONG time for this to happen as I not only need to make space...I need the money right now to get me through to end of month.

http://i68.photobucket.com/albums/i1...e/DSC00677.jpg

Small spider crack in finish shown below...
http://i68.photobucket.com/albums/i1...e/DSC00675.jpg

Closer view from back

http://i68.photobucket.com/albums/i1...e/DSC00674.jpg

Small stress at side due to release agent in mold...minor. But I dont want to NOT mention anything...lol.

http://i68.photobucket.com/albums/i1...e/DSC00673.jpg

Same thing...opposite side...again...minor..but there.

http://i68.photobucket.com/albums/i1...e/DSC00672.jpg

Small white spot shown....looks like a small cigarette ash honestly...lol.

http://i68.photobucket.com/albums/i1...e/DSC00671.jpg

One overall overhead view....very good looking cover as you can see...the blems that are there you cant even see.

http://i68.photobucket.com/albums/i1...e/DSC00670.jpg

Engagement ring if anybody wants it....$5000. lol Fat chance I bet! lolol
http://i68.photobucket.com/albums/i1...e/DSC00665.jpg

Also will upload pics of the unmounted slicks for you drag racers.

$300 a set of two delivered or $600 for all four delivered. $1200 set of 4 tires was the cost brand new....and these have WAY over half life left in em!

http://i68.photobucket.com/albums/i1...e/DSC00678.jpg


Thats all the pics I have at the moment. Will get some of the tails this weekend for the above poster. Lots of snow here...and the superbowl also may prevent this. Go Colts!

Paypal address: mbenz at bellonsales dot com

AckTL05 02-06-2010 02:31 AM

Sorry. I cannot afford the cover as we speak. I need to get a new engine or rebuild mine. Last night I blew a rod straight through my oil pan

MichaelBenz 02-06-2010 10:27 AM

$165 delivered to US 48 states.

Nobody has dibs....first payment gets the LAST COVER AVAILABLE WHATSOEVER. Last one right here...http://i68.photobucket.com/albums/i1...e/DSC00677.jpg

Small spider crack in finish shown below...
http://i68.photobucket.com/albums/i1...e/DSC00675.jpg

Closer view from back

http://i68.photobucket.com/albums/i1...e/DSC00674.jpg

Small stress at side due to release agent in mold...minor. But I dont want to NOT mention anything...lol.

http://i68.photobucket.com/albums/i1...e/DSC00673.jpg

Same thing...opposite side...again...minor..but there.

http://i68.photobucket.com/albums/i1...e/DSC00672.jpg

Small white spot shown....looks like a small cigarette ash honestly...lol.

http://i68.photobucket.com/albums/i1...e/DSC00671.jpg

One overall overhead view....very good looking cover as you can see...the blems that are there you cant even see.

http://i68.photobucket.com/albums/i1...e/DSC00670.jpg



Also will upload pics of the unmounted slicks for you drag racers and autocrossers.

$300 a set of two delivered or $600 for all four delivered. $1200 set of 4 tires was the cost brand new....and these have WAY over half life left in em!

http://i68.photobucket.com/albums/i1...e/DSC00678.jpg


Thats all the pics I have at the moment. Will get some of the tails this weekend for the above poster. Lots of snow here...and the superbowl also may prevent this. Go Colts!

Paypal address: mbenz at bellonsales dot com

Again...NOBODY HAS DIBS ON ANYTHING...FIRST COME FIRST SERVED/SHIPPED.

Will ship same day payment is received.

mr.b 02-08-2010 05:17 PM

how much are u asking for the tails? Are u willing to sell them seperate? i am a new member and cannot pm you, is there a better way to get in touch?

MichaelBenz 02-10-2010 12:37 AM


Originally Posted by mr.b (Post 11723532)
how much are u asking for the tails? Are u willing to sell them seperate? i am a new member and cannot pm you, is there a better way to get in touch?

Sorry man....I have been caught up selling off an ultra clean rust free 1987 Mazda RX-7 roller that I had for $900 (no engine/trans) and closing that deal on another forum. I will go get em out right now and get some pics posted up tomorrow. I think I listed what I wanted for them earlier in the thread..but if not I will figure that out and get that up at the same time. Driveway space now FTW!

You can text me at 317-753-0412 anytime if you wish. I would give you an email address...but I still dont have my new PC configured yet to our corporate network...so I dont currently have access to my email till this weekend.

MichaelBenz 02-12-2010 02:11 PM

Ok guys....my new PC is being configured as we speak so I should be up and rockin again. I will get stuff posted this weekend for sure for those that have been waiting. (tails, ect)

MichaelBenz 03-16-2010 09:44 AM

Bump for the guy texting me about the last cover. Its pictured in the post right above here^^^

$150 delivered 48 US states

First come (pay) first served. No dibs.

For anybody else interested....

I also have a set of OEM tails for 2005 TL
2 OEM radiators, one brand new never used
OEM airbox
OEM suspension (shocks/springs/rear sway)
The carbon Fiber Engine Cover listed last above that I recently found

Thats about all I can remember at the moment.

Ron A 03-16-2010 11:21 AM


Originally Posted by MichaelBenz (Post 11831965)
Bump for the guy texting me about the last cover. Its pictured in the post right above here^^^

$150 delivered 48 US states

First come (pay) first served. No dibs.

For anybody else interested....

I also have a set of OEM tails for 2005 TL
2 OEM radiators, one brand new never used
OEM airbox
OEM suspension (shocks/springs/rear sway)
The carbon Fiber Engine Cover listed last above that I recently found

Thats about all I can remember at the moment.

Please post prices for these. If you already posted prices link me to the post because I'm too lazy to look for it.

billz1109 03-16-2010 12:04 PM

what is your pp i can send payment for the door moulding

billz1109 03-16-2010 04:55 PM

the door moulding did you sell it i can pay for it right away i really want them pls

MichaelBenz 03-17-2010 10:26 PM


Originally Posted by billz1109 (Post 11833145)
the door moulding did you sell it i can pay for it right away i really want them pls

I dont show anywhere that I have sold this item but am not seeing it sitting around my stuff that I have together. I will look around more tonite and let you know. That would have been something I put aside seperately underneath a couch or bed to keep it from ever getting bent or damaged...so I still have a few beds to look under.


Last carbon fiber cover is paid for and sold. Sorry whoever was texting me....somebody else pulled the trigger while you were asking questions and vacillating on your decision. It happens...and I cannot afford to sit and let another paying person walk away only to have the potential buyer back out on me. This is why I said no dibs...first pay first served. Done deal.

MichaelBenz 03-17-2010 10:29 PM


Originally Posted by Ron A (Post 11832222)
Please post prices for these. If you already posted prices link me to the post because I'm too lazy to look for it.

Ok Ron...no problemo. A matter of fact....you can close this thread and I will start a new one with the last wave of parts I have around.

And no guys....no more carbon fiber covers. Thats it! I have no more. (that I know of...if one appears I will let you guys know...but frankly I dont expect it)


All times are GMT -5. The time now is 10:28 PM.


© 2024 MH Sub I, LLC dba Internet Brands