FS: 3.7L Top plate, 3.5L mani, ATLP Test Pipe, Vinyl, VLEDs, OCCs & Laser Interceptor
#1
3.7L Top plate, 3.5L mani, ATLP Test Pipe, Vinyl, VLEDs, OCCs & Laser Interceptor
Category: Accessories
Price: $0
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): TL 4G, TL 3G, Other Honda/Acura, Type-S Model
Location (State/Prov/Terr): CA
Item Condition: Used
I'll take $10 off for local pick-up in the San Diego area or Inland Empire area (or someplace inbetween). Local pick-up must pay with cash.
For shipping to Canada send me a PM for quote, otherwise prices are shipped within US.
- J35Z3 Intake Manifold; $110 shipped
--- Made of same stuff as the TL-SHAWD manifold.
--- Approx. 68mm inlet diameter
--- Approx. 70mm from center of bolts for TB mounting (should fit 3.2L & 3.5L throttle bodies w/o any type of adapter)
--- Bottom gasket is the same as that of 3G TL and many other Honda/Acura models.
--- Will include a new OEM TB gasket that fits this manifold
--- This would be a good upgrade for a 3.2L or someone that wants a mani similar to the 3.7L mani that will fit their 3.2L or 3.5L throttle body
- J35Z3 Lower fuel runners; $80 shipped
--- Same as 3.7L Honda/Acuras has the oval exit port to mate with the cylinder heads vice the round ones
--- Includes 1x new unused gasket (the one with EGR port)
--- These are stock, NOT port/polish
- TL-SHAWD intake manifold top plate; $110 shipped
--- Does not include IMT actuator
--- Powder coated matte black w/ red acura logo, both are powder coated
PayPal only to verified shipping addresses.
Last edited by mzilvar; 06-09-2015 at 06:34 PM.
#3
You'd need both the top-plate and the manifold though, you won't be able to use your 3.2L intake manifold top plate with this manifold.
In the 3.2L the butterflies are a part of the manifold, with this one the butterflies are a part of the top plate for the IM.
You could re-use your IMT solenoid off the 3.2L mani, that would fit.
If you had the 3.5L top plate that would work as well with the IM here.
#6
Jeff
iTrader: (3)
Join Date: Jul 2014
Location: Port City, New Brunswick Canada
Posts: 5,728
Received 815 Likes
on
726 Posts
The manifold would bolt up to the 3.2L 3G TL and you would be able to use your stock TB.
You'd need both the top-plate and the manifold though, you won't be able to use your 3.2L intake manifold top plate with this manifold.
In the 3.2L the butterflies are a part of the manifold, with this one the butterflies are a part of the top plate for the IM.
You could re-use your IMT solenoid off the 3.2L mani, that would fit.
If you had the 3.5L top plate that would work as well with the IM here.
You'd need both the top-plate and the manifold though, you won't be able to use your 3.2L intake manifold top plate with this manifold.
In the 3.2L the butterflies are a part of the manifold, with this one the butterflies are a part of the top plate for the IM.
You could re-use your IMT solenoid off the 3.2L mani, that would fit.
If you had the 3.5L top plate that would work as well with the IM here.
Also will I need a gasket for the IM top plate?
Trending Topics
#12
Yes but your IAT sensor would have to be relocated. On the 2G RL the IAT sensor is located on the manifold, there is not a location on this manifold for you to install your IAT sensor onto it.
Your existing top plate would work fine as well, if you picked up the top plate in this thread you wouldn't be able to use your original engine cover any longer.
If you have a CAI it could be re-located to the air intake tube just prior to the throttle body.
Your existing top plate would work fine as well, if you picked up the top plate in this thread you wouldn't be able to use your original engine cover any longer.
If you have a CAI it could be re-located to the air intake tube just prior to the throttle body.
#13
Adding test pipe and extra weld-in bung for wideband O2 sensor. Test pipe has a stainless bung welded in and includes a plug for it if you don't have a wideband.
No gaskets or heat shields included.
As an FYI innovate recommends installing wideband O2 sensors 24" downstream from your merge, if you have the ATLP V2 J-pipe the location of the bung in this test pipe has it about 18" from the merge, with the ATLP V2 to have your wideband 24" downstream it has to be in the mid pipe of your cat-back exhaust.
Test pipe fits 3G TL
Test Pipe w/ Stainless O2 bung and an extra mild-steel O2 sensor bung: $80 shipped
No gaskets or heat shields included.
As an FYI innovate recommends installing wideband O2 sensors 24" downstream from your merge, if you have the ATLP V2 J-pipe the location of the bung in this test pipe has it about 18" from the merge, with the ATLP V2 to have your wideband 24" downstream it has to be in the mid pipe of your cat-back exhaust.
Test pipe fits 3G TL
Test Pipe w/ Stainless O2 bung and an extra mild-steel O2 sensor bung: $80 shipped
Last edited by mzilvar; 07-04-2015 at 10:58 PM.
#18
Consolidating everything to 1 thread, adding:
OEM Purge Control Solenoid Valve P/N: 36162-RDV-J01
-- $10 shipped or free local pick-up (So. Cal)
-- Has about 90k miles on it, still works, car threw a code once for this (it wasn't the tighten gas cap code) and I replaced it, however while replacing it upon inspection the code was set from a hose that rotted through and was disconnected and not from the valve
OEM 2005 Acura TL Oil Pan w/ Time-cert in the drain plug
-- Still leaks with the time-cert in it
-- Could have it re-machined and use an oversize drain plug to fix it
-- Free local pick-up
-- Will not ship (it's large)
OEM Purge Control Solenoid Valve P/N: 36162-RDV-J01
-- $10 shipped or free local pick-up (So. Cal)
-- Has about 90k miles on it, still works, car threw a code once for this (it wasn't the tighten gas cap code) and I replaced it, however while replacing it upon inspection the code was set from a hose that rotted through and was disconnected and not from the valve
OEM 2005 Acura TL Oil Pan w/ Time-cert in the drain plug
-- Still leaks with the time-cert in it
-- Could have it re-machined and use an oversize drain plug to fix it
-- Free local pick-up
-- Will not ship (it's large)
#19
You should repost all this into a new thread since you have added parts all over the place in this thread.
That way you'll get everything together with the pictures and it will help your sale.
That way you'll get everything together with the pictures and it will help your sale.
#22
Bump..
Whats left?
- J35Z3 Intake Manifold - $100 shipped
- TL-SHAWD Top Plate (Powder coated) - $100 shipped
- Intake mani & Top plate together - $190 shipped
- J35Z3 Lower fuel runners (fit MDX heads, etc. newer style) stock - $80 shipped
- OEM TL Oil Pan - Free local pick-up
Whats left?
- J35Z3 Intake Manifold - $100 shipped
- TL-SHAWD Top Plate (Powder coated) - $100 shipped
- Intake mani & Top plate together - $190 shipped
- J35Z3 Lower fuel runners (fit MDX heads, etc. newer style) stock - $80 shipped
- OEM TL Oil Pan - Free local pick-up
#34
You'd need both parts, your stock throttle body would work though. I can offer a deal if you're interested I still have these parts.
Probably do the install too if you like, I'm also in San Diego.
#35
Price drop on whats left:
- J35Z3 Intake Manifold - $75 shipped
- TL-SHAWD Top Plate w/ IMT Solenoid (I put one back on it) (Powder coated) - $75 shipped
- Intake mani & Top plate together - $140 shipped
- J35Z3 Lower fuel runners (fit MDX heads, etc. newer style) stock - $55 shipped
- J35Z3 Intake Manifold - $75 shipped
- TL-SHAWD Top Plate w/ IMT Solenoid (I put one back on it) (Powder coated) - $75 shipped
- Intake mani & Top plate together - $140 shipped
- J35Z3 Lower fuel runners (fit MDX heads, etc. newer style) stock - $55 shipped
#36
Adding a few items..
Some VLED XML-U2 bulbs with power supplies $45 shipped
-2x 9005 keyed bulbs with power supply
-1x H11 keyed bulb with power supply
Laser Interceptor Generation 8 quad system $150 shipped
- 4x sensors
- CPU
- Harness with parking mode switch
- Needs a new power switch, otherwise functions
- Yes it works and saved me a few tickets it's illegal for me to put it on my car in the state where I now live though (California)
- For info see here: https://www.laser-interceptorusa.com/info
ATLP Race pipe for 2008-2012 Honda Accord (Will NOT fit 3G TLs) $100 shipped
- Brand new never installed, includes gaskets and bolts
- Never put it on the car
Pair of Saikou Michi oil catch cans , both swirl tank design $75 for the pair (they're $100 each new) or $50 each shipped
- 1x with 3/8" inlet and outlet
- 1x with 1/2" inlet and outlet
Saikou Michi Co. Home
Some miscellaneous vinyl, the bigger one is oracal rapid air in gloss black, one of the smaller is the same (scraps and strips) and then two are chrome vinyl (1x unused, 1x some used) with wrapping glove and corner thingy, $30 shipped for all the vinyl, big one is unused will post measurements later.
Really just looking to sell this stuff so it's not taking up space, if interested in anything drop me a PM.
Some VLED XML-U2 bulbs with power supplies $45 shipped
-2x 9005 keyed bulbs with power supply
-1x H11 keyed bulb with power supply
Laser Interceptor Generation 8 quad system $150 shipped
- 4x sensors
- CPU
- Harness with parking mode switch
- Needs a new power switch, otherwise functions
- Yes it works and saved me a few tickets it's illegal for me to put it on my car in the state where I now live though (California)
- For info see here: https://www.laser-interceptorusa.com/info
ATLP Race pipe for 2008-2012 Honda Accord (Will NOT fit 3G TLs) $100 shipped
- Brand new never installed, includes gaskets and bolts
- Never put it on the car
Pair of Saikou Michi oil catch cans , both swirl tank design $75 for the pair (they're $100 each new) or $50 each shipped
- 1x with 3/8" inlet and outlet
- 1x with 1/2" inlet and outlet
Saikou Michi Co. Home
Some miscellaneous vinyl, the bigger one is oracal rapid air in gloss black, one of the smaller is the same (scraps and strips) and then two are chrome vinyl (1x unused, 1x some used) with wrapping glove and corner thingy, $30 shipped for all the vinyl, big one is unused will post measurements later.
Really just looking to sell this stuff so it's not taking up space, if interested in anything drop me a PM.
#37
Vinyl $30 shipped
- 5'x2' of Oracal 970RA High Gloss Black
- 40"x1' of chrome vinyl
- Miscellaneous usable scraps of 970RA high gloss black and most of a second tube that was also 40"x1' of the chrome vinyl
- With the wrap glove.
- Finish line tape and scraper thingy will ship seperately
Mods can the subject be changed to:
3.7L Top plate, 3.5L mani, ATLP Test Pipe, Vinyl, VLEDs, OCCs & Laser Interceptor
mod edit-updated
- 5'x2' of Oracal 970RA High Gloss Black
- 40"x1' of chrome vinyl
- Miscellaneous usable scraps of 970RA high gloss black and most of a second tube that was also 40"x1' of the chrome vinyl
- With the wrap glove.
- Finish line tape and scraper thingy will ship seperately
Mods can the subject be changed to:
3.7L Top plate, 3.5L mani, ATLP Test Pipe, Vinyl, VLEDs, OCCs & Laser Interceptor
mod edit-updated
Last edited by mzilvar; 08-02-2016 at 07:08 PM.