2003 CL-S Front Clip 6MT Perfect for swap
#1
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
2003 CL-S Front Clip 6MT Perfect for swap
Up for sale is the front clip of a 2003 Acura CL Type S w/ 6MT and ~65k miles. I bought this to swap into my accord but things changed and want to sell it. This is being sold complete for the time being as if I were to split it then I will most likely just put it in my accord. Some of the main components included are listed below but so much more is on there:
Price: $4000 + shipping*(see s/h cost explanation below)
Engine
Transmission w/ clutch, flywheel, shift linkage, shifter, etc
ECU
Starter
All three Dash Harnesses
Complete (uncut) Engine Harness
Motor & Tranny Mounts
Master & Slave Cylinders
All three Pedals
Gauge Cluster
Exhaust manifold with cat
All Sensors
Air Box
A/C Compressor/Lines, Power steering pump/Lines, Radiator, etc.
So Much More
Location: Mukwonago, WI 53149
Shipping: Anywhere in Continental USA is $700.00 if I set everything up, etc. If you can get it cheaper, which I'm sure you could, then it's up to you to set everything up and its all on your cost. They will need some kind of lift to get it on the truck. Or you can come pick it up.
Gauges
ALL Three Pedals
Shifter and linkage ***ALSO WHITE CONNECTOR CONNECTS TO ECU VERY IMPORTANT PIECE***
AIR BOX
Price: $4000 + shipping*(see s/h cost explanation below)
Engine
Transmission w/ clutch, flywheel, shift linkage, shifter, etc
ECU
Starter
All three Dash Harnesses
Complete (uncut) Engine Harness
Motor & Tranny Mounts
Master & Slave Cylinders
All three Pedals
Gauge Cluster
Exhaust manifold with cat
All Sensors
Air Box
A/C Compressor/Lines, Power steering pump/Lines, Radiator, etc.
So Much More
Location: Mukwonago, WI 53149
Shipping: Anywhere in Continental USA is $700.00 if I set everything up, etc. If you can get it cheaper, which I'm sure you could, then it's up to you to set everything up and its all on your cost. They will need some kind of lift to get it on the truck. Or you can come pick it up.
Gauges
ALL Three Pedals
Shifter and linkage ***ALSO WHITE CONNECTOR CONNECTS TO ECU VERY IMPORTANT PIECE***
AIR BOX
#2
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
just to clarify front suspension is included but not going to guarantee its condition.
#4
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
thanks!
#5
I Blaze Up In
Join Date: Dec 2006
Location: 07601, NJ
Age: 35
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
If you are willing to part I might be interested. Let me know how much you want for...
Transmission w/ clutch, flywheel, shift linkage, shifter, etc
Tranny Mount, Rear Engine Mount
Gauge Cluster
Pedals
Starter
Thnx
-Mark
Transmission w/ clutch, flywheel, shift linkage, shifter, etc
Tranny Mount, Rear Engine Mount
Gauge Cluster
Pedals
Starter
Thnx
-Mark
#7
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
whoever wants to buy it for a great price and part it out themselves to keep the parts they want and make some money give me a call (262) 271-3414 I will make you a great deal!!!
Trending Topics
#10
I got the Shifts
iTrader: (5)
i would keep
flywheel
clutch pedal
rear mount
front mount
clutch tank
master cylinder
clutch
i would then part out the car or sell everything as a package for 2500
that means
engine
harness
trans
cup holder
shift linkage
shifter console
guages
ecu
bearings
parking brake
side mounts
trans mounts
shift knob
shift boot
brake pedal
gas pedal
slave cylinder
flex hose
mount bolts
for 2500
if anyone is interested please pm me.
flywheel
clutch pedal
rear mount
front mount
clutch tank
master cylinder
clutch
i would then part out the car or sell everything as a package for 2500
that means
engine
harness
trans
cup holder
shift linkage
shifter console
guages
ecu
bearings
parking brake
side mounts
trans mounts
shift knob
shift boot
brake pedal
gas pedal
slave cylinder
flex hose
mount bolts
for 2500
if anyone is interested please pm me.
#11
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
i would keep
flywheel
clutch pedal
rear mount
front mount
clutch tank
master cylinder
clutch
i would then part out the car or sell everything as a package for 2500
that means
engine
harness
trans
cup holder
shift linkage
shifter console
guages
ecu
bearings
parking brake
side mounts
trans mounts
shift knob
shift boot
brake pedal
gas pedal
slave cylinder
flex hose
mount bolts
for 2500
if anyone is interested please pm me.
flywheel
clutch pedal
rear mount
front mount
clutch tank
master cylinder
clutch
i would then part out the car or sell everything as a package for 2500
that means
engine
harness
trans
cup holder
shift linkage
shifter console
guages
ecu
bearings
parking brake
side mounts
trans mounts
shift knob
shift boot
brake pedal
gas pedal
slave cylinder
flex hose
mount bolts
for 2500
if anyone is interested please pm me.
#14
I got the Shifts
iTrader: (5)
Dibs (in order of pm)
phee -picking up the car
flywheel
clutch pedal
rear mount
rear bracket
front mount
clutch tank
master cylinder
clutch
clutch fluid tank
engine dampeners
$500
L's TL
engine harness
trans mounts
brake pedal
slave cylinder
flex hose
mount bolts
$300
bigmark89
trans
shifter
shift linkage
shifter console
shift boot
guages
brake pedal
trans mount -already called
parking brake
starter
cupholder
1500
DC3328
trans -already called
cup holder -already called
shift linkage -alread called
shifter console -already called
bearings
parking brake -already called
side mounts
trans mounts -already called
shift knob
shift boot -already called
brake pedal -i have an extra one
gas pedal
slave cylinder -already called
flex hose -already called
mount bolts
$200 for whats left OR 1700 if you send the money first
this is on a first come first serve basis.
As it stands now we have a total of $2500
we still have more parts that can be called. i will pick up the front clip when i have $3100 in my paypal.
please post on this thread from now on to keep it civil.
remember FIRST COME FIRST SERVE
paypal - Miguellemillo22@gmail.com
everyone who sends payment, must post the parts that they want FIRST, and i will approve to make sure no one pays for something thats been called.
I will also PM you my phone number, first-last name, and home address to prove that i am legit.
LETS GET THESE PARTS GUYS!!!!
flywheel
clutch pedal
rear mount
rear bracket
front mount
clutch tank
master cylinder
clutch
clutch fluid tank
engine dampeners
$500
L's TL
engine harness
trans mounts
brake pedal
slave cylinder
flex hose
mount bolts
$300
bigmark89
trans
shifter
shift linkage
shifter console
shift boot
guages
brake pedal
trans mount -already called
parking brake
starter
cupholder
1500
DC3328
trans -already called
cup holder -already called
shift linkage -alread called
shifter console -already called
bearings
parking brake -already called
side mounts
trans mounts -already called
shift knob
shift boot -already called
brake pedal -i have an extra one
gas pedal
slave cylinder -already called
flex hose -already called
mount bolts
$200 for whats left OR 1700 if you send the money first
this is on a first come first serve basis.
As it stands now we have a total of $2500
we still have more parts that can be called. i will pick up the front clip when i have $3100 in my paypal.
please post on this thread from now on to keep it civil.
remember FIRST COME FIRST SERVE
paypal - Miguellemillo22@gmail.com
everyone who sends payment, must post the parts that they want FIRST, and i will approve to make sure no one pays for something thats been called.
I will also PM you my phone number, first-last name, and home address to prove that i am legit.
LETS GET THESE PARTS GUYS!!!!
#16
I got the Shifts
iTrader: (5)
originally posted by bigmark
Well I am def. down, especially at that great price But before I make any promises to buy those parts, I first have to check with my friend who lets me use his shop lift to do all my car work. I have to see how long he will let me use his lift. Because I dont have the money to pay a shop to the swap, so I would have to do the swap on my own, but would need the to use his shop for at least 4 days. So I will say this, if I get permission to use his shop lift for at least 4 days, and I can get $1500, and that ECU Module that RichieV6 made for the auto to 6spd swap I will buy this from you.
I will keep you updated on my part, and could you please keep me updated on your part.
Thnx
-Mark
Well I am def. down, especially at that great price But before I make any promises to buy those parts, I first have to check with my friend who lets me use his shop lift to do all my car work. I have to see how long he will let me use his lift. Because I dont have the money to pay a shop to the swap, so I would have to do the swap on my own, but would need the to use his shop for at least 4 days. So I will say this, if I get permission to use his shop lift for at least 4 days, and I can get $1500, and that ECU Module that RichieV6 made for the auto to 6spd swap I will buy this from you.
I will keep you updated on my part, and could you please keep me updated on your part.
Thnx
-Mark
#20
J35 _ 5 Speed A/T
iTrader: (14)
Has anyone called dibs on the Cylinder Heads and Throttle body? If not, I would like to call dibs on both the Cylinder Heads and Throttle Body.
* referred to this thread from V-6p.net
** PHEE, I am in Rossville, GA. About 2 hours from ATL. So I would drive down to grab these 2 items to avoid shipping costs.
* referred to this thread from V-6p.net
** PHEE, I am in Rossville, GA. About 2 hours from ATL. So I would drive down to grab these 2 items to avoid shipping costs.
#22
J35 _ 5 Speed A/T
iTrader: (14)
Dibs (in order of pm)
phee -picking up the car
flywheel
clutch pedal
rear mount
rear bracket
front mount
clutch tank
master cylinder
clutch
clutch fluid tank
engine dampeners
$500
L's TL
engine harness
trans mounts
brake pedal
slave cylinder
flex hose
mount bolts
$300
bigmark89
trans
shifter
shift linkage
shifter console
shift boot
guages
brake pedal
trans mount -already called
parking brake
starter
cupholder
1500
DC3328
trans -already called
cup holder -already called
shift linkage -alread called
shifter console -already called
bearings
parking brake -already called
side mounts
trans mounts -already called
shift knob
shift boot -already called
brake pedal -i have an extra one
gas pedal
slave cylinder -already called
flex hose -already called
mount bolts
WHEEELMAN
Cylinder Heads
** PHEE: Honestly, name your price and I'll work with you. Based on previous threads over on V-6P.NET, I would offer about $350??? I do apologize if that is a lowball offer. Recently a set of J35A4 heads went for $350 on V-6P.NET, so thats my ballpark idea.
I do have plenty of funds ready to send you for PAYPAL. So I am serious about picking these up.
phee -picking up the car
flywheel
clutch pedal
rear mount
rear bracket
front mount
clutch tank
master cylinder
clutch
clutch fluid tank
engine dampeners
$500
L's TL
engine harness
trans mounts
brake pedal
slave cylinder
flex hose
mount bolts
$300
bigmark89
trans
shifter
shift linkage
shifter console
shift boot
guages
brake pedal
trans mount -already called
parking brake
starter
cupholder
1500
DC3328
trans -already called
cup holder -already called
shift linkage -alread called
shifter console -already called
bearings
parking brake -already called
side mounts
trans mounts -already called
shift knob
shift boot -already called
brake pedal -i have an extra one
gas pedal
slave cylinder -already called
flex hose -already called
mount bolts
WHEEELMAN
Cylinder Heads
** PHEE: Honestly, name your price and I'll work with you. Based on previous threads over on V-6P.NET, I would offer about $350??? I do apologize if that is a lowball offer. Recently a set of J35A4 heads went for $350 on V-6P.NET, so thats my ballpark idea.
I do have plenty of funds ready to send you for PAYPAL. So I am serious about picking these up.
#23
I got the Shifts
iTrader: (5)
Dibs (in order of pm)
phee -picking up the car
flywheel
clutch pedal
rear mount
rear bracket
front mount
clutch tank
master cylinder
clutch
clutch fluid tank
engine dampeners
$500
L's TL
engine harness
trans mounts
brake pedal
slave cylinder
flex hose
mount bolts
$300
bigmark89
trans
shifter
shift linkage
shifter console
shift boot
guages
brake pedal
trans mount -already called
parking brake
starter
cupholder
1500
DC3328
trans -already called
cup holder -already called
shift linkage -alread called
shifter console -already called
bearings
parking brake -already called
side mounts
trans mounts -already called
shift knob
shift boot -already called
brake pedal -i have an extra one
gas pedal
slave cylinder -already called
flex hose -already called
mount bolts
WHEEELMAN
Cylinder Heads
$375
** PHEE: Honestly, name your price and I'll work with you. Based on previous threads over on V-6P.NET, I would offer about $350??? I do apologize if that is a lowball offer. Recently a set of J35A4 heads went for $350 on V-6P.NET, so thats my ballpark idea.
I do have plenty of funds ready to send you for PAYPAL. So I am serious about picking these up.
phee -picking up the car
flywheel
clutch pedal
rear mount
rear bracket
front mount
clutch tank
master cylinder
clutch
clutch fluid tank
engine dampeners
$500
L's TL
engine harness
trans mounts
brake pedal
slave cylinder
flex hose
mount bolts
$300
bigmark89
trans
shifter
shift linkage
shifter console
shift boot
guages
brake pedal
trans mount -already called
parking brake
starter
cupholder
1500
DC3328
trans -already called
cup holder -already called
shift linkage -alread called
shifter console -already called
bearings
parking brake -already called
side mounts
trans mounts -already called
shift knob
shift boot -already called
brake pedal -i have an extra one
gas pedal
slave cylinder -already called
flex hose -already called
mount bolts
WHEEELMAN
Cylinder Heads
$375
** PHEE: Honestly, name your price and I'll work with you. Based on previous threads over on V-6P.NET, I would offer about $350??? I do apologize if that is a lowball offer. Recently a set of J35A4 heads went for $350 on V-6P.NET, so thats my ballpark idea.
I do have plenty of funds ready to send you for PAYPAL. So I am serious about picking these up.
cmon guys, ill keep this running for about a week. if there is no interest, the deal is off. (i can get you some heads anyway wheelman)
#29
I Blaze Up In
Join Date: Dec 2006
Location: 07601, NJ
Age: 35
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
#30
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
#31
Thread Police Chief
Join Date: Jul 2006
Location: Nashville, TN / Huntsville, AL
Age: 38
Posts: 1,372
Likes: 0
Received 2 Likes
on
2 Posts
adamlee05
All harnesses other than Engine harness:
-Left Engine compartment harness
-Right Engine compartment harness
-In-Dash harnesses
$200 IF NOT DAMAGED
All harnesses other than Engine harness:
-Left Engine compartment harness
-Right Engine compartment harness
-In-Dash harnesses
$200 IF NOT DAMAGED
Last edited by adamlee05; 03-27-2009 at 04:50 PM.
#33
New Member
Join Date: Mar 2009
Location: space
Age: 39
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Very intrested in the ECU. pm system of course does not work for me yet. I joined in hopes of picking this up.
email me at thesamoflange@yahoo.com
thnks
email me at thesamoflange@yahoo.com
thnks
#34
I got the Shifts
iTrader: (5)
Dibs (in order of pm)
phee -picking up the car
flywheel
clutch pedal
rear mount
rear bracket
front mount
clutch tank
master cylinder
clutch
clutch fluid tank
engine dampeners
$500
L's TL
engine harness
trans mounts
brake pedal
slave cylinder
flex hose
mount bolts
$300
bigmark89
trans
shifter
shift linkage
shifter console
shift boot
guages
brake pedal
trans mount -already called
parking brake
starter
cupholder
1500
DC3328
trans -already called
cup holder -already called
shift linkage -alread called
shifter console -already called
bearings
parking brake -already called
side mounts
trans mounts -already called
shift knob
shift boot -already called
brake pedal -i have an extra one
gas pedal
slave cylinder -already called
flex hose -already called
mount bolts
$200
WHEEELMAN
Cylinder Heads
$375
Matthew Pentecost
ECU
150
adamlee05
All harnesses other than Engine harness:
-Left Engine compartment harness
-Right Engine compartment harness
-In-Dash harnesses
$200 IF NOT DAMAGED
phee -picking up the car
flywheel
clutch pedal
rear mount
rear bracket
front mount
clutch tank
master cylinder
clutch
clutch fluid tank
engine dampeners
$500
L's TL
engine harness
trans mounts
brake pedal
slave cylinder
flex hose
mount bolts
$300
bigmark89
trans
shifter
shift linkage
shifter console
shift boot
guages
brake pedal
trans mount -already called
parking brake
starter
cupholder
1500
DC3328
trans -already called
cup holder -already called
shift linkage -alread called
shifter console -already called
bearings
parking brake -already called
side mounts
trans mounts -already called
shift knob
shift boot -already called
brake pedal -i have an extra one
gas pedal
slave cylinder -already called
flex hose -already called
mount bolts
$200
WHEEELMAN
Cylinder Heads
$375
Matthew Pentecost
ECU
150
adamlee05
All harnesses other than Engine harness:
-Left Engine compartment harness
-Right Engine compartment harness
-In-Dash harnesses
$200 IF NOT DAMAGED
#35
I got the Shifts
iTrader: (5)
total: 3225
ill give you guys 4-5 weeks to send the money and then ill head out. if for some reason you cannot pay within this time, please send me a pm.
remember: if anyone falls through, i cannot/will not pick the front clip up and everyone will recieve their money back minus the 3% paypal fee.
if you are not local, please be aware, there will be shipping charges added. i am not shipping large items (engine, trans)
looking forward to it guys!
ill give you guys 4-5 weeks to send the money and then ill head out. if for some reason you cannot pay within this time, please send me a pm.
remember: if anyone falls through, i cannot/will not pick the front clip up and everyone will recieve their money back minus the 3% paypal fee.
if you are not local, please be aware, there will be shipping charges added. i am not shipping large items (engine, trans)
looking forward to it guys!
#36
I got the Shifts
iTrader: (5)
Dibs (in order of pm)
phee -picking up the car
flywheel
clutch pedal
rear mount
rear bracket
front mount
clutch tank
master cylinder
clutch
clutch fluid tank
engine dampeners
$500
L's TL
engine harness
trans mounts
brake pedal
slave cylinder
flex hose
mount bolts
$300
bigmark89
trans
shifter
shift linkage
shifter console
shift boot
guages
brake pedal
trans mount -already called
parking brake
starter
cupholder
1500
DC3328
trans -already called
cup holder -already called
shift linkage -alread called
shifter console -already called
bearings
parking brake -already called
side mounts
trans mounts -already called
shift knob
shift boot -already called
brake pedal -i have an extra one
gas pedal
slave cylinder -already called
flex hose -already called
mount bolts
$200
WHEEELMAN
Cylinder Heads
$375
Matthew Pentecost
ECU
150
thesamoflange
Ecu
150 -already called
adamlee05
All harnesses other than Engine harness:
-Left Engine compartment harness
-Right Engine compartment harness
-In-Dash harnesses
$200 IF NOT DAMAGED
FIRST COME FIRST SERVE
phee -picking up the car
flywheel
clutch pedal
rear mount
rear bracket
front mount
clutch tank
master cylinder
clutch
clutch fluid tank
engine dampeners
$500
L's TL
engine harness
trans mounts
brake pedal
slave cylinder
flex hose
mount bolts
$300
bigmark89
trans
shifter
shift linkage
shifter console
shift boot
guages
brake pedal
trans mount -already called
parking brake
starter
cupholder
1500
DC3328
trans -already called
cup holder -already called
shift linkage -alread called
shifter console -already called
bearings
parking brake -already called
side mounts
trans mounts -already called
shift knob
shift boot -already called
brake pedal -i have an extra one
gas pedal
slave cylinder -already called
flex hose -already called
mount bolts
$200
WHEEELMAN
Cylinder Heads
$375
Matthew Pentecost
ECU
150
thesamoflange
Ecu
150 -already called
adamlee05
All harnesses other than Engine harness:
-Left Engine compartment harness
-Right Engine compartment harness
-In-Dash harnesses
$200 IF NOT DAMAGED
FIRST COME FIRST SERVE
#38
Thread Police Chief
Join Date: Jul 2006
Location: Nashville, TN / Huntsville, AL
Age: 38
Posts: 1,372
Likes: 0
Received 2 Likes
on
2 Posts
Who here is absolutely sure they can and will pay for their called items? I for one can assure that - again provided the items are 100% intact, as they're easily damaged.
Who else?
Who else?
#40
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
The Harnesses are uncut, I made sure of that as I didnt want to deal with soldering etc.