*Groupbuy Cusco front strut bars and lower arm bars*
03-06-2003, 09:15 PM
#41
Originally posted by N.O. Accorderz
hey fellow acl-ers...a fellow member on av6.com has rear braces for the accor coupes...i think it would fit the cls too...his sn is RDX on accordv6.com...visit our site and check it out...
hey fellow acl-ers...a fellow member on av6.com has rear braces for the accor coupes...i think it would fit the cls too...his sn is RDX on accordv6.com...visit our site and check it out...
If you are talking about the rear UPPER strut, it will NOT work on the CL. The CL has the same basic suspension, but the back seat and trunk are WAY different!!! On the CL, you have to take out the rear seat to install the rear shocks or to adjust them if you have Koni's, etc. It you put a rear upper strut on the CL, you can NOT have a back seat. This goes for ALL upper strut bars that are made for Accords. We would have to have one custom made to fit our cars and not leave out the back seat.
Skunk2 also makes a rear lower strut for our car, mounts in the same place that the OBX one would.
..... that's not helping!
03-10-2003, 11:04 PM
#45
Blown is Best
Originally posted by AztecRol
Here you go Danny, just stare at these till yours comes in!!
>;]
>;] >;] >;] >;]
Here you go Danny, just stare at these till yours comes in!!
>;]
>;] >;] >;] >;]
Rolie, you're one cruel dude teasin' us like that.
03-16-2003, 09:18 PM
#49
Originally posted by calvinpham
any new on the cusco bar yet?
any new on the cusco bar yet?
FYI, I speak with blxmjx just about everyday. He hasn't received the bars yet. When I spoke with him last week, he said that he was hoping for mid month, but more than likely, it would be end of March. I am sure the day he gets the bars in his hands, he will post up that they have arrived and that he will be shipping them out!! I have done business with blxmjx in the past and he will come through. Just be patient!!! I have a lower bar on order, so I want the shipment to get here soon too!!!!
03-17-2003, 12:32 AM
#53
foolio at heart
Thread Starter
Join Date: Oct 2000
Location: Diamond Bar, CA
Posts: 1,634
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by AztecRol
Hey guys,
FYI, I speak with blxmjx just about everyday. He hasn't received the bars yet. When I spoke with him last week, he said that he was hoping for mid month, but more than likely, it would be end of March. I am sure the day he gets the bars in his hands, he will post up that they have arrived and that he will be shipping them out!! I have done business with blxmjx in the past and he will come through. Just be patient!!! I have a lower bar on order, so I want the shipment to get here soon too!!!!
Hey guys,
FYI, I speak with blxmjx just about everyday. He hasn't received the bars yet. When I spoke with him last week, he said that he was hoping for mid month, but more than likely, it would be end of March. I am sure the day he gets the bars in his hands, he will post up that they have arrived and that he will be shipping them out!! I have done business with blxmjx in the past and he will come through. Just be patient!!! I have a lower bar on order, so I want the shipment to get here soon too!!!!
Yes, unfortunately the bars haven't been received yet. I will check on the status tomorrow. I'm hoping that they get here very soon. As soon as I get info on the status I will definitely post it here asap.
I really appreciate everyone's patience.
03-18-2003, 01:15 PM
#54
Advanced
Join Date: Jun 2002
Location: orlando
Age: 40
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
do you kno when you're going to go in on another group buy for the strut bars? and how do they perform compared to the neuspeed and comptech ones.....last question....how hard is the install for the lower arm bars? do you have to drill or is it pretty much just bolt on....thanks
david
david
03-19-2003, 05:25 PM
#56
Originally posted by caddy
Aztec
Notice much with the lower Arm bar ? Seems to be a bit of a clearance issue no ?
Aztec
Notice much with the lower Arm bar ? Seems to be a bit of a clearance issue no ?
The pic belongs to peiqinglong, you can try asking him.
He has Tiens too, so he is pretty low.
03-19-2003, 07:39 PM
#57
foolio at heart
Thread Starter
Join Date: Oct 2000
Location: Diamond Bar, CA
Posts: 1,634
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by davykim7
do you kno when you're going to go in on another group buy for the strut bars? and how do they perform compared to the neuspeed and comptech ones.....last question....how hard is the install for the lower arm bars? do you have to drill or is it pretty much just bolt on....thanks
david
do you kno when you're going to go in on another group buy for the strut bars? and how do they perform compared to the neuspeed and comptech ones.....last question....how hard is the install for the lower arm bars? do you have to drill or is it pretty much just bolt on....thanks
david
03-20-2003, 09:40 AM
#59
foolio at heart
Thread Starter
Join Date: Oct 2000
Location: Diamond Bar, CA
Posts: 1,634
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by GOT PSI?
Hey Arnold - Is it too late for this group buy for both bars?
Thanks
Hey Arnold - Is it too late for this group buy for both bars?
Thanks
btw,
the bars still have not come in
. I checked on Monday. I'll check again next week.
03-25-2003, 04:32 PM
#66
Blood Type: S
Join Date: Feb 2002
Location: South Jersey
Age: 45
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
What is the difference between Cusco, Comptech Titanium, and Neuspeed besides price? Is one better than the other? I read that these add little difference in performance, the strut bar. So is it based upon looks under the hood? Why is everyone getting Cusco? Opinions?
03-30-2003, 07:43 PM
#70
Advanced
Join Date: Jun 2002
Location: orlando
Age: 40
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
after looking on the internet for forever and a day i found a place that imports cusco stuff in...the strut tower bar was 150 plus shipping...this is the info for the company
BOZZ PERFORMANCE
45499 Industrial Place, Unit 2 Fremont, CA. 94538 U.S.A.
Tel.1-510-657-4393
i ordered the tower bar and the guy said it was gonna be 4-8 weeks....damn....oh well
BOZZ PERFORMANCE
45499 Industrial Place, Unit 2 Fremont, CA. 94538 U.S.A.
Tel.1-510-657-4393
i ordered the tower bar and the guy said it was gonna be 4-8 weeks....damn....oh well
03-30-2003, 08:42 PM
#71
Originally posted by EEPOWER
What is the difference between Cusco, Comptech Titanium, and Neuspeed besides price? Is one better than the other? I read that these add little difference in performance, the strut bar. So is it based upon looks under the hood? Why is everyone getting Cusco? Opinions?
What is the difference between Cusco, Comptech Titanium, and Neuspeed besides price? Is one better than the other? I read that these add little difference in performance, the strut bar. So is it based upon looks under the hood? Why is everyone getting Cusco? Opinions?
The difference between the Cusco and the Neuspeed is that the Cusco goes in front of the stock bar and the Neuspeed goes behind the stock bar when installed.
Personally, I picked the Cusco bar because they make some of the best, if not the best, aftermarket suspensions in Japan. I also picked it because no one really has it, and I think that it looks better than the Neuspeed bar.
You need to decide what you want, and how much you want to spend, then make your choice.
03-31-2003, 12:44 PM
#72
Blood Type: S
Join Date: Feb 2002
Location: South Jersey
Age: 45
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
What is better performance wise...the CT replacement by itself, the Neuspeed or Cusco add-on, or both the the replacement and the add-on? Doers this mean, you can actually put on all three at once? That would be funky
03-31-2003, 06:50 PM
#73
Suzuka Master
Originally posted by EEPOWER
Doers this mean, you can actually put on all three at once? That would be funky
Doers this mean, you can actually put on all three at once? That would be funky
04-08-2003, 08:20 PM
#76
3rd Gear
Join Date: Feb 2003
Location: San Jose
Age: 49
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
is there a time table when this will arive. It been almost two months now. I am trying to be patience, but I don't want to sit here for two months and doesn't know when it will arrive. Please let me know when? Thank sorry for this message.
04-08-2003, 08:26 PM
#77
foolio at heart
Thread Starter
Join Date: Oct 2000
Location: Diamond Bar, CA
Posts: 1,634
Likes: 0
Received 0 Likes
on
0 Posts
woohoo!! I finally received confirmation that the container has arrived. I've been told that we should have the bars in this week!! hallelujah! I will post once I finally have them in hand. I am estimating that they should start shipping sometime next week.
Thanks for the patience guys.
hallelujah! I will post once I finally have them in hand. I am estimating that they should start shipping sometime next week. Thanks for the patience guys.
