Ok When I had my factory blose setup in my 01 type s all the audio on the left cut off.. sometimes only the passenger front worked.... i ripped all the blose out and put some sony hu,kenwood amp alpine type r comp's left the the blose in the back temp. NOW ITS HAPPENING AGAIN . whats going on is it some type of factory wiring causing the problem? help asap... im still under 50k... will warranty cover it if its the cars wiring?

 

Could be wiring, possible the Bose amp or the harness ?

 

bose amp is gone kenwood in its place... harness was new so i hope it aint that unless your talking about the factory harness.... like when i drive over some bumps and make some sharp turns the left will come on temp. then go back out

 

sounds like a faulty connection some where

 

yea sounds like you got something grounding out. do you have any accessories hooked up anywhere in the car? lights... etc? factory deck?

 

only thing i added welll... shop added... after market hu/speakers/amp for speakers. when i hit bumps sometimes the left side cuts back on...

 

just installed a Pioneer AVH-6500DVD with existing Bose. makes a whining sound with/as engine revs. can anyone help me?

 

Bad ground.

 

so you guys think mine is a grounding problem also? should i take it to acura or the place i got my stuff installed?

 

Hopefully you folks will be able to be of some assistance here. I just swapped out a 99' TL single disc HU w/ a 6 disc HU from an O2 (or 03) TL that I bought off of someone from Acura-TL.

Now the problem is I was never given the security code for the HU, and since the HU is now in the car I am without my tunes and I don't want to put the old HU back in (last resort) until I can get the codes for the new HU from the guys that originally sold it to me.

(Problems)
-I have tried to get (1) the VIN from the guy (since I have the serial # for the HU) but unfortunately he is nowhere to be found, and it could be awhile before I do hear from him (if I hear from him at all).

Can anyone provide any assistance here? I have the serial # for the HU, but just don't have the VIN from the original car it came from so I don't think contacting a dealer is going to do me any good.

I hear that you can retrieve the code w/ just the serial # but I don't know if a dealership is going to do this.

Is anyone able to help me out and get the code so I can get a functional HU? I am willing to make it worth your while.

Thanks!!

 

take it to the place you got it installed. chances are acura wont do anything considering you changed out the speakers.

 

definetly take it back to the place where it was installed.... at my shop we offer lifetime warranty on all labor.. you can find us on the Cover of Mobile Electronics magazine AUDIO EXPERTS ventura Ca
http://www.me-mag.com/images/art/cov_0804b.jpg cover shot... and full article