I'm running my speaker wire from my trunk to my front doors the only problem is I can't find a way to get the wire into my doors. is there a way i can splice into another wire that can get the power to the speakers or a trick i can use to get the wire into the door?

 

Sure! I wired in from behind the HU.





As you might be able to tell, I just tied into the wiring.

 

which colors am i going to be splicing into for which speaker

 

I found blue/green + and gray/ black - for FL
and red/green+ brown/ black- for FR
can anyone put some truth these?

 

anyone have experience?

 

Its been too long ago for me, I can't recall man. I'm certain the wiring colors are listed on the forum, that's where I found them when I did this build like a year ago

 

i found those wire information on the 12 volt that's why i was wondering

 

i pulled new wire through the door molex. it is a pita though

 

you can always quick-test and see if it plays like you intended.

 

Ifi its new (16g) wire you want to run: http://www.the12volt.com/installbay/...TID=78731&PN=1

 

that's perfect but i'll probably end up splicing the wire from behind the head unit. if it doesn't work i'll do it that way

 

Well guys I finished installing the amp to my speakers and these are the following colors/ polarity to the front speakers
blue/green + and gray/ black - Front Left
Red/green+ brown/ black- Front Right
Anyone having doubt about amping your speakers don't doubt it and do it. Sounds amazing!

 

Just be sure to disable the bose EQ, that sucker will mess with aftermarket HU's big time.