i just installed 2 ways in my Girls 2000 accord. They sound like they are missing highs, I was wondering if i disconnect the tweeters with the high freq. be directed to the 2 ways??? there is a X over in the factory sytem and i think its in the tweeters. basicly i just want to know if i disconnect the tweeters will i disable the x over so that ALL freq. go to the 2 way? i dont want to cut the wires on the tweets if im not sure b/c it a bitch putting them back on.

 

No crossovers don't work like that, you have to patch the signal in before the crossover. It is a passive crossover which means it will be between the amp and the speaker.

 

yea i know but when the install guy took my factories out he only gave me the tweeter and the mid driver..i didnt recieve the "crossover unit ". there is a litle "cap" thing on the tweeter.
i dont have BOSE and the accord doesnt either...i just want to know what to do ti get the FULL RANGE on the coaxials.

 

that little "cap" thing is the crossover. most stock tweeters have those crossovers attached to them. i would try disconnecting the stock tweeter and see what happens.

 

damn that means i have to cut the wires. There is not a Plug on the stock tweets. Any disconnect thier tweets. I dont wanna cut them and leave the wires falling into the dash!

 

Cutting the high pass filter off of the tweeter will do nothing to the midrange. You must find the low pass filter and remove it, if there even is one.