Trekka

Hello, I wanted to see if anyone had any advice on what amp to go with, the (2) subs that I Want to use are Kicker CVR

• Sensitivity: 86.7 dB
• RMS Power Range : 400 Watts
• Peak Power Handling: 800 Watts
• Impedance: Dual 4 Ohm
• Low Frequency response: 25 Hz
• High Frequency Response: 500 Hz
• Diameter: 12 Inch

I don't know a very much about car audio and I just wanted to know what would be the best amp to suit these subs, I'm not trying to win any sound competitions, just want to sound good, maybe piss off a neighbor or two?

D.Greenwood13

Get Dual 2 ohm subs that way u can wire it down to a 2 ohm load and get a Kicker ZX.750.1, they are perfect for those subs.

on1wheel01

or get a 1 ohm stable amp and get 2 dual 4 ohm subs and make em wang. Where are you located and also what is ur budget there are way better speakers out there for around that price range of the cvr's

D.Greenwood13

For around that same price range i would recomend Diamond D3 Subs and a Diamond D3 600.1 amp.

Trekka

I live in Northern Idaho (Sokane Wa, Coeur d'Alene, ID) area budget isn't really an issue I just want it to be quality and still last

eggyhustles

That's underpowering

headroom ftw

D.Greenwood13

Not really underpowering unless your talking about 50 watts, the subs are 400 watts rms a piece and its a 750 watt rms amp

mattastick

on1wheel01

I believe kicker rates theres at max wattage not rms

D.Greenwood13

They r rated rms not max

Trekka

Greenwood speakes the truth its rated 750RMS@ 2ohm, 375 @ 4ohm, out of curiosity the ohms is only related to wiring options in the box? or did I misunderstand their optional purpose?

D.Greenwood13

Its related to how u wire up the voice coils and the impedence of the coils. Parallel Wiring; Dual 2 ohm coils=1 ohm load, Dual 4 ohm coils=2 ohm load/Series Wiring;Dual 2 ohm coils=4 ohm load, Dual 4 ohm coils=8 ohm load.