making speaker spacer

Thread Tools
 
Search this Thread
 
Old Feb 2, 2005 | 06:44 PM
  #1  
uncleb's Avatar
Thread Starter
Banned
 
Joined: Jun 2004
Posts: 870
Likes: 0
From: davis (sacramento)
making speaker spacer

any particular types of wood i should choose??
i know eldurino (i think) did a cool ass write up on making them, i can't find it now tho, but i don't think it said anything on type of wood anyways...

its for the doors
Reply
Old Feb 2, 2005 | 07:14 PM
  #2  
Tsx536's Avatar
Rep'n Taxbrain.com
 
Joined: Aug 2004
Posts: 7,075
Likes: 3
From: N. Cali-forn-i-a
Here ya go man!

https://acurazine.com/forums/showthr...peaker+spacers

Hey you go to UCD?
Reply
Old Feb 2, 2005 | 07:44 PM
  #3  
elduderino's Avatar
VP Electricity
 
Joined: Jun 2004
Posts: 4,617
Likes: 8
From: Portland OR US
When I made the spacers for joerckt, my first set for the TSX, I used Home Depot particleboard... they shattered when I was screwing them in, and I had to make another set.

The photos in that thread show 1/2" birch plywood and 1/4" tempered Masonite from Home Depot - they sell 2x2 and 2x4 sheets. I drill pilot holes and countersinks. I also spray-paint them black to make sure they don't absorb moisture over time and swell up - and to make them look better and get black stuff all over my fingers...
Reply
Old Feb 2, 2005 | 07:55 PM
  #4  
ou sig's Avatar
Boomer SOONER
 
Joined: Jul 2003
Posts: 3,729
Likes: 14
From: McKinney, TX
those are probably the best spacers I have ever seen most people wont take that much time, but that will be how to do them exactly right
Reply
Old Feb 2, 2005 | 08:13 PM
  #5  
elduderino's Avatar
VP Electricity
 
Joined: Jun 2004
Posts: 4,617
Likes: 8
From: Portland OR US
Thanks! You know, I used the OEM speaker diameter and drew the outside circle with a compass I had, and the inside circle was the inside of the Alpine spacer grille ring... so it really didn't take long - 'cept the painting and maybe the drilling.

But after that ring came apart in my hands at like 10PM in joe's garage, I knew I didn't want THAT ever happening again. That sucked the blood alcohol out of me so bad I needed a beer to keep from being negatively sober.

I wish I had included some pics of the rear of the door panel in this thread - there are some in my TSX F door thread - so you can see the foam that these spacers snug up against from behind.
Reply
Old Feb 2, 2005 | 08:19 PM
  #6  
uncleb's Avatar
Thread Starter
Banned
 
Joined: Jun 2004
Posts: 870
Likes: 0
From: davis (sacramento)
Originally Posted by Tsx536
na, i did but now i'm at sac city....i do live right by ucd campus tho, where u at?
Reply
Old Feb 2, 2005 | 08:21 PM
  #7  
uncleb's Avatar
Thread Starter
Banned
 
Joined: Jun 2004
Posts: 870
Likes: 0
From: davis (sacramento)
Originally Posted by elduderino
When I made the spacers for joerckt, my first set for the TSX, I used Home Depot particleboard... they shattered when I was screwing them in, and I had to make another set.

The photos in that thread show 1/2" birch plywood and 1/4" tempered Masonite from Home Depot - they sell 2x2 and 2x4 sheets. I drill pilot holes and countersinks. I also spray-paint them black to make sure they don't absorb moisture over time and swell up - and to make them look better and get black stuff all over my fingers...
Thanks for the info bro!!

You work at a car stereo shop or something?? You definately know your shit
Reply
Old Feb 2, 2005 | 08:29 PM
  #8  
elduderino's Avatar
VP Electricity
 
Joined: Jun 2004
Posts: 4,617
Likes: 8
From: Portland OR US
I started in car stereo in 1986... but I haven't worked in retail for years. Still keep my hand in, tho...thanks.

Remember the foam tape...
Reply
Old Feb 4, 2005 | 02:36 PM
  #9  
Tsx536's Avatar
Rep'n Taxbrain.com
 
Joined: Aug 2004
Posts: 7,075
Likes: 3
From: N. Cali-forn-i-a
Originally Posted by uncleb
na, i did but now i'm at sac city....i do live right by ucd campus tho, where u at?
I live in Lodi now, but I use to live in Sac for like 5-6 years. Just thought it was kinda cool to see someone else from around the area. With the new merger, I'm seeing a lot of more people from the Sac area then I use to....pretty cool!

In fact I'm going up there tonight for the Kings game! We'll probably hit the bars after too...
Reply
Old Feb 4, 2005 | 04:18 PM
  #10  
uncleb's Avatar
Thread Starter
Banned
 
Joined: Jun 2004
Posts: 870
Likes: 0
From: davis (sacramento)
Originally Posted by Tsx536
I live in Lodi now, but I use to live in Sac for like 5-6 years. Just thought it was kinda cool to see someone else from around the area. With the new merger, I'm seeing a lot of more people from the Sac area then I use to....pretty cool!

In fact I'm going up there tonight for the Kings game! We'll probably hit the bars after too...
Have fun man. I've wanted to go to a Kings game for so long, but the prices are just ridiculous. This damn city needs another professional sports team.
Reply
Old Feb 4, 2005 | 04:38 PM
  #11  
Tsx536's Avatar
Rep'n Taxbrain.com
 
Joined: Aug 2004
Posts: 7,075
Likes: 3
From: N. Cali-forn-i-a


Thanks man. Yeah we do....we need a baseball or football team. They are gonna build a new NBA arena in downtown though...That will be tight!

Tixs are way too hard to get...I got some because of a friend of a friend of a season ticket holder. You can check Ebay for tix but of course you'll be paying more than face value.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Yumcha
Automotive News
9
Feb 25, 2020 09:57 AM
obert
Car Parts for Sale
10
Nov 14, 2015 09:59 PM
yvr_tsx
4G TL Tires, Wheels & Suspension
5
Sep 15, 2015 01:14 PM
iRaw
ILX
3
Sep 5, 2015 12:10 AM
obert
Car Parts for Sale
4
Sep 3, 2015 08:40 PM




All times are GMT -5. The time now is 12:09 AM.