Infinity Kappa Perfect 6.1 Don't fit?
#43
Amp racks complete! Also ran my 0ga today and took out my 4ga runs (if anyone needs power wire check black market!)
Just gotta take the amps out, mount them down on the rack, drill the appropriate holes for the connections, and put everything in the trunk.
e30 - you're second in line for the spacers, since nf3's the OP. I made one of his spacers today, and one of my bits snapped while making the 2nd one. So I'm gonna have to pick up a new bit before I can finish the last 3.
Here's the amp racks!
Not the best carpeting job, those corners were a *****. You won't really be able to see is anyway
Just gotta take the amps out, mount them down on the rack, drill the appropriate holes for the connections, and put everything in the trunk.
e30 - you're second in line for the spacers, since nf3's the OP. I made one of his spacers today, and one of my bits snapped while making the 2nd one. So I'm gonna have to pick up a new bit before I can finish the last 3.
Here's the amp racks!
Not the best carpeting job, those corners were a *****. You won't really be able to see is anyway
#47
Originally Posted by nf3d0149ab
What's cracking me up are all your stuffed characters.
This is at work?
Cool. How are those racks going to be positioned?
This is at work?
Cool. How are those racks going to be positioned?
If this makes any sense at all lol
red = wood
blue = wiring
yellow = amps (it actually sits flush with the rack, the drawing makes it look like it's floating :\)
Just made a flush mount for a blue led on each rack. It'll illuminate the amp
(Picture doesn't do justice, looks crooked in pic!)
Should still be able to lift up spaer wheel area with this install. It's what I'm aiming for, anyway
#48
Thread Starter
User Awaiting Email Confirmation
iTrader: (5)
Joined: Nov 2007
Posts: 7,786
Likes: 1
From: San Francisco
In the closet.....I'm thinking puppet master.
So, the amp racks are going to hang from the sides of your box?
That's gonna be nice to be able to still utilize the spare.
Good thinking.
So, the amp racks are going to hang from the sides of your box?
That's gonna be nice to be able to still utilize the spare.
Good thinking.
#53
Thread Starter
User Awaiting Email Confirmation
iTrader: (5)
Joined: Nov 2007
Posts: 7,786
Likes: 1
From: San Francisco
That looks totally sick!
You still have a good amount of space...
I had a TSX loaner from Acura of Serramonte in Daly City.
They are nice!
Thanks for making those spacers.
How can I collect them from you?
If you drink beer we could meet up somewhere in the Mission or SOMA area.
Whatever is convenient.
You still have a good amount of space...
I had a TSX loaner from Acura of Serramonte in Daly City.
They are nice!
Thanks for making those spacers.
How can I collect them from you?
If you drink beer we could meet up somewhere in the Mission or SOMA area.
Whatever is convenient.
Last edited by nf3d0149ab; 06-29-2008 at 09:54 PM.
#56
Gains only at about 1/4th today nf30 still breaking those bad boys in! Should get close to 2x louder haha
Gonna fine tune it tomorrow, here's the last video while it's breaking in. Gonna feed them some real juice soon!
350z cargo net got here today too
http://www.youtube.com/watch?v=QyYo_5b8ioo
Gonna fine tune it tomorrow, here's the last video while it's breaking in. Gonna feed them some real juice soon!
350z cargo net got here today too
http://www.youtube.com/watch?v=QyYo_5b8ioo
#57
Thread Starter
User Awaiting Email Confirmation
iTrader: (5)
Joined: Nov 2007
Posts: 7,786
Likes: 1
From: San Francisco
SO SICK!!!
Yeah man your TSX is hella nice!
It was cool meeting up and THANK YOU for the spacers.
The drivers fit through the spacers...I think that is what I needed to measure...so I think they will work hoping that with the spacers they will clear the door panel.
Makes me almost want to make a switch from the CL.
I need to tweak mine out first and then see what I think.
I can't wait to get my rims so I feel like I don't have such a stock ride.
Yeah man your TSX is hella nice!
It was cool meeting up and THANK YOU for the spacers.
The drivers fit through the spacers...I think that is what I needed to measure...so I think they will work hoping that with the spacers they will clear the door panel.
Makes me almost want to make a switch from the CL.
I need to tweak mine out first and then see what I think.
I can't wait to get my rims so I feel like I don't have such a stock ride.
Thread
Thread Starter
Forum
Replies
Last Post
acura_dipset_tl
Car Parts for Sale
1
01-01-2016 03:02 PM
nanos
Car Parts for Sale
26
11-12-2015 08:41 PM
sockr1
Car Parts for Sale
22
10-01-2015 01:31 AM