***new Vendor***
02-09-2005, 04:18 PM
#1
Banned
Thread Starter
***new Vendor***
Just wanted to let everyone know that I am now a vendor for the Acura community. I'll do my best to assist you guys in anyway I can, and give you as close to internet pricing on products as I can. Although that may not always happen as internet pricing is way low, I will do what I can, and offer whatever warranties possible on the equipment. We carry a full range of A/V equipment..
And for you guys that are in the Tri-State area, we are located at 1361 St. Georges Ave. in Colonia, NJ - 732.388.7000 or email info@streeteffectz.com
THANKS!
And for you guys that are in the Tri-State area, we are located at 1361 St. Georges Ave. in Colonia, NJ - 732.388.7000 or email info@streeteffectz.com
THANKS!
) rca adaptor
customer service!
02-09-2005, 06:28 PM
#5
Banned
Thread Starter
Where are you emailing to? info@streeteffectz.com is the main email address, and we respond throughout each day as the emails come in. Possible you were emailing somewhere else or, by chance, PM'ing me? If so, my PM box was closed for a week, and just reopened, I'll check that, and my apologies if that was the case. That won't happen anymore 
Trending Topics
02-09-2005, 07:49 PM
#11
Sig Rho's Finest
Join Date: Apr 2004
Location: New Yoke City
Age: 40
Posts: 8,471
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by StreetEffectz
Where are you emailing to? info@streeteffectz.com is the main email address, and we respond throughout each day as the emails come in. Possible you were emailing somewhere else or, by chance, PM'ing me? If so, my PM box was closed for a week, and just reopened, I'll check that, and my apologies if that was the case. That won't happen anymore
cool, ill email that address from mine which is tpatel9@gmail.com right now. thanks
edit:i looked through my emails. i was emailing streeteffectz@streeteffectz.com
Last edited by NYZGREATST; 02-09-2005 at 07:54 PM.
02-09-2005, 09:40 PM
#14
Banned
Join Date: Jan 2005
Age: 49
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Our main line of alarms/remote starts is Compustar. We still do DEI products (Viper, etc), but since EVERYONE does Viper, I decided to try something different. And I am MORE THAN happy with the Compustar product, ESPECIALLY with the range and reliability of them.
As far as other products, we get just about everything. Audio/Video, exterior parts, wheels, tires, body kits, lighting, air horns, neons, wiring, spoilers, truck accessories, etc etc. Basically everything.
As far as the Blitz for the navi, it's the same adapter for navi and non navi vehicles, unless you are talking about something else???
We are about 45 minutes from Toms River.
Thanks u guys who vouched for me
As far as other products, we get just about everything. Audio/Video, exterior parts, wheels, tires, body kits, lighting, air horns, neons, wiring, spoilers, truck accessories, etc etc. Basically everything.
As far as the Blitz for the navi, it's the same adapter for navi and non navi vehicles, unless you are talking about something else???
We are about 45 minutes from Toms River.
Thanks u guys who vouched for me
02-09-2005, 10:30 PM
#16
Banned
Join Date: Jan 2005
Age: 49
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
The coilover I have to pass along to my brother, he handles all of the accessories like that. Please email the store direct with that request, info@streeteffectz.com
As for the mid-line compustar alarm/remote start, if you just want the 1 Way system, it's $399.99 installed, and the first level of 2 way systems (the 2WFM-AS) is $499.99 installed. These prices include the bypass module and any other necessary parts. Everything is included. And just for the record, we solder EVERYTHING, no T-taps
As for the mid-line compustar alarm/remote start, if you just want the 1 Way system, it's $399.99 installed, and the first level of 2 way systems (the 2WFM-AS) is $499.99 installed. These prices include the bypass module and any other necessary parts. Everything is included. And just for the record, we solder EVERYTHING, no T-taps
02-10-2005, 12:12 AM
#18
Banned
Thread Starter
Originally Posted by elduderino
A good T-tap is better than a crappy solder connection.
There's a reason everyone wants Viper... of course, I'm biased...
There's a reason everyone wants Viper... of course, I'm biased...
Kidding, but i did major in electrical engineering and design, so I have some good techniques
02-10-2005, 10:10 AM
#19
VP Electricity
Join Date: Jun 2004
Location: Portland OR US
Age: 58
Posts: 4,617
Likes: 0
Received 8 Likes
on
1 Post
Oh, no... I was gonna send people to you before I found out you're an EE... you guys can't install neat wiring to save your life! : )
Honestly, once a guy came in to have his Ungo alarm looked at at my shop. It was a self-install, and the guy had a problem, and the tech guys sent him to me cause they knew I was alarm guy. Anyway, he has a newer (at the time) Passat. I ask him to show me the alarm and he walks me around to the TRUNK.
He opens it and points under the R deck. I lookunder the R deck and there is a rat's nest of wires and an alarm brain. One mounting screw of the alarm brain has pierced the trunk runoff channel and is rusty as hell, and there is actually water on the wiring and the brain case.
I straighten up and say, "You're a double-E, aren't you?" He recoils and says, "HOW DID YOU KNOW?" I respond, "because ONLY a double-E would think that was a good idea."
He let me spend 30 minutes pulling it to send in for repair, and then wouldn't pay 22.50 for my time.
Honestly, once a guy came in to have his Ungo alarm looked at at my shop. It was a self-install, and the guy had a problem, and the tech guys sent him to me cause they knew I was alarm guy. Anyway, he has a newer (at the time) Passat. I ask him to show me the alarm and he walks me around to the TRUNK.
He opens it and points under the R deck. I lookunder the R deck and there is a rat's nest of wires and an alarm brain. One mounting screw of the alarm brain has pierced the trunk runoff channel and is rusty as hell, and there is actually water on the wiring and the brain case.
I straighten up and say, "You're a double-E, aren't you?" He recoils and says, "HOW DID YOU KNOW?" I respond, "because ONLY a double-E would think that was a good idea."
He let me spend 30 minutes pulling it to send in for repair, and then wouldn't pay 22.50 for my time.
02-10-2005, 03:38 PM
#23
Banned
Join Date: Aug 2002
Location: Miami, FL
Age: 40
Posts: 5,045
Likes: 0
Received 0 Likes
on
0 Posts
hey ron, how about a list of brands you are a supplier of? that could possibly save you some tiem in the long run 
alos, do you deal with Image Dynamics or Memphis Belle by any cahnce? Thanks.
alos, do you deal with Image Dynamics or Memphis Belle by any cahnce?
Thanks.
02-10-2005, 04:12 PM
#24
VP Electricity
Join Date: Jun 2004
Location: Portland OR US
Age: 58
Posts: 4,617
Likes: 0
Received 8 Likes
on
1 Post
He probably is limited from actually advertising brands which he purchases directly on the internet. Note that he is being vague about it. He wants you to PM him with specifics.
Besdies, can you imagine trying to sell a particular brand of gear in such an opinionted group? : )
Besdies, can you imagine trying to sell a particular brand of gear in such an opinionted group? : )
02-10-2005, 06:05 PM
#26
Banned
Join Date: Jan 2005
Age: 49
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys....thanks for the nice welcome! I will post a detailed list of what I do carry and get. Just know that I can't sell absolutely everything that I carry over the internet, but for the most part, it's not a problem I just can't sell certain lines through internet sales becuase I'll have my distribution pulled.
I just can't sell certain lines through internet sales becuase I'll have my distribution pulled.
02-10-2005, 06:16 PM
#27
Banned
Thread Starter
Originally Posted by car_lost
hey ron, how about a list of brands you are a supplier of? that could possibly save you some tiem in the long run
alos, do you deal with Image Dynamics or Memphis Belle by any cahnce? Thanks.
alos, do you deal with Image Dynamics or Memphis Belle by any cahnce?
Thanks.