AcuraZine - Acura Enthusiast Community

Introducing AcuraZine Shift Knobs

Thread Tools
 
Search this Thread
 
Old 05-25-2005 | 06:24 PM
  #81  
klepto's Avatar
klepto
Senior Moderator
 
Joined: Jul 2002
Posts: 12,005
Likes: 9
From: Bay Area, CA
Originally Posted by Dan Martin
I had a momo knob before and I was pretty disappointed with the set screw design. They constantly needed to be tightened.

From the looks of it, the shift knob on the 1st gen CL has the same thread as most of the other MT Acuras. I don't know if it's the same size since I don't have a 1st gen CL to work with, but it looks promising from the pictures i've seen.
cool, i hope we can work things out. This is a long shot, but do you think it'll fit a 4th gen vtec lude shifter as well? I swapped one into my cl because it sits a bit lower. i THINK the thread is the same, just wondering if you knew for sure. I'll try to do some research and see if it is in fact the same or not
Like
Old 05-25-2005 | 06:41 PM
  #82  
sumdumguy's Avatar
sumdumguy
a jawful a somethin awful
 
Joined: Oct 2004
Posts: 1,443
Likes: 0
From: da roc,N.Y.
1st gen'r interested. with the azine engraved
Like
Old 05-25-2005 | 06:47 PM
  #83  
teh CL's Avatar
teh CL
Moderator
iTrader: (1)
 
Joined: Dec 2004
Posts: 14,217
Likes: 999
From: Kelowna
that screw design knob is crap (no offense Klepto) my mom has one on her sunfire and she actually i always have to re-tighten it

Originally Posted by Dan Martin
We should meet up sometime to see if they'll work. I work in Oakville so I'm sure we could find a place that's convenient for both of us.
where in Oakville do you work? i'd meet up for sure and see if we can get this done
Like
Old 05-25-2005 | 07:00 PM
  #84  
agranado's Avatar
agranado
how handsome I am
 
Joined: Oct 2004
Posts: 12,983
Likes: 1
From: Miami, FL
Originally Posted by sumdumguy
1st gen'r interested. with the azine engraved
holy hell.. if it had Azine engraved into it?

-Alex
Like
Old 05-25-2005 | 07:11 PM
  #85  
2point2CL's Avatar
2point2CL
Racer
 
Joined: May 2005
Posts: 399
Likes: 0
From: Omaha
id be interested for a 1st gen
Like
Old 05-25-2005 | 08:12 PM
  #86  
Dan Martin's Avatar
Dan Martin
Thread Starter
Photography Nerd
 
Joined: Sep 2003
Posts: 21,489
Likes: 11
From: Toronto
Originally Posted by SilverCL97
where in Oakville do you work? i'd meet up for sure and see if we can get this done
I work near the Bronte Go station at 3rd line and Wyecroft. I'm kind of busy with a few things right now but we'll set something up for June.
Like
Old 05-25-2005 | 08:23 PM
  #87  
klepto's Avatar
klepto
Senior Moderator
 
Joined: Jul 2002
Posts: 12,005
Likes: 9
From: Bay Area, CA
Originally Posted by SilverCL97
that screw design knob is crap (no offense Klepto) my mom has one on her sunfire and she actually i always have to re-tighten it



where in Oakville do you work? i'd meet up for sure and see if we can get this done
none taken, yea it is a bitch sometimes and it does come loose a lot.

heres something to think about. what id we could....get our USERNAMES engraved as well?
Like
Old 05-25-2005 | 09:08 PM
  #88  
teh CL's Avatar
teh CL
Moderator
iTrader: (1)
 
Joined: Dec 2004
Posts: 14,217
Likes: 999
From: Kelowna
that would be pretty damn
Like
Old 05-25-2005 | 09:09 PM
  #89  
teh CL's Avatar
teh CL
Moderator
iTrader: (1)
 
Joined: Dec 2004
Posts: 14,217
Likes: 999
From: Kelowna
Originally Posted by Dan Martin
I work near the Bronte Go station at 3rd line and Wyecroft. I'm kind of busy with a few things right now but we'll set something up for June.
alrite, just let me know
Like
Old 05-25-2005 | 09:18 PM
  #90  
chuckz's Avatar
chuckz
97 2.2cL black
 
Joined: Nov 2004
Posts: 790
Likes: 0
From: bay area, ca
im down for a first gen cl shift knob!
Like
Old 05-25-2005 | 09:31 PM
  #91  
powderman's Avatar
powderman
Instructor
 
Joined: Apr 2004
Posts: 148
Likes: 0
From: New Jersey
i'd be all over a 1G version...
Like
Old 05-25-2005 | 09:31 PM
  #92  
racersky's Avatar
racersky
Burning Brakes
 
Joined: May 2004
Posts: 1,176
Likes: 0
From: Pennsylvania
Hurry up dammit make one for the AT Acuras I'm definitely going to buy one.
Like
Old 05-26-2005 | 01:07 AM
  #93  
Blitz's Avatar
Blitz
Recently turned 18
 
Joined: Jul 2004
Posts: 1,407
Likes: 5
From: Atlanta GA
Originally Posted by racersky
Hurry up dammit...
I'd settle for some additional pics at Least, for now. hahaha
Like
Old 05-26-2005 | 02:22 AM
  #94  
jus_cl's Avatar
jus_cl
Instructor
 
Joined: May 2005
Posts: 126
Likes: 0
I'm down, put one on the list for me
Like
Old 05-26-2005 | 03:02 AM
  #95  
Time For Sleeep's Avatar
Time For Sleeep
That's Racist
 
Joined: Aug 2004
Posts: 5,634
Likes: 0
From: San Diego native. UCLA resident. =)
Hey Dan, boot for the AT knob too? Yessssss?
Like
Old 05-26-2005 | 07:36 AM
  #96  
CL Platano's Avatar
CL Platano
Tristate ViP Crew
 
Joined: Nov 2004
Posts: 14,089
Likes: 1
From: North Jersey
Definately make one for the first Gen..I'm really sick of my Momo knob..
Like
Old 05-26-2005 | 07:37 AM
  #97  
DivineCL's Avatar
DivineCL
Revelation 3:15-17
 
Joined: Sep 2004
Posts: 5,376
Likes: 0
From: Outskirts of A-CL
Dan Martin - I will buy your custom shift knob if you made it for the 1st gen CL ( 3.0 Auto ).
Like
Old 05-27-2005 | 01:26 AM
  #98  
t_dot_porkchop's Avatar
t_dot_porkchop
Instructor
 
Joined: Oct 2004
Posts: 137
Likes: 0
From: Toronto
dan,

auto shift knob with a "TSX" logo engraved with a leather boot......make it happen
Like
Old 05-27-2005 | 02:57 PM
  #99  
teh CL's Avatar
teh CL
Moderator
iTrader: (1)
 
Joined: Dec 2004
Posts: 14,217
Likes: 999
From: Kelowna
^
Like
Old 05-27-2005 | 10:48 PM
  #100  
BlueCLRycR's Avatar
BlueCLRycR
eh f**k altezzas.
 
Joined: Jan 2005
Posts: 480
Likes: 0
From: Gaffney, SC
i want one now. make it for my first gen. with ACURAzine.com engraved in it. but would it be possible to refinish it in gunmetal and i want a acurazine sticker like klepto has.
Like
Old 05-29-2005 | 04:17 AM
  #101  
Time For Sleeep's Avatar
Time For Sleeep
That's Racist
 
Joined: Aug 2004
Posts: 5,634
Likes: 0
From: San Diego native. UCLA resident. =)
HAha, I'll stay consistent w/ my requests, and hope for the boot.
Like
Old 05-29-2005 | 04:46 AM
  #102  
teg_to_bike's Avatar
teg_to_bike
I'm back, biatch.
 
Joined: Sep 2004
Posts: 5,752
Likes: 0
From: Sunnyvale, CA
Azine condoms! HAHA AZINE FUCKED YA!

ok I seriously need to go to bed now.
Like
Old 05-29-2005 | 04:58 AM
  #103  
mystikk's Avatar
mystikk
failhard.
 
Joined: May 2004
Posts: 4,546
Likes: 10
From: Alaska
I'll probably be one of the first to order a shift boot and a knob for a 2nd gen AT CL-S. Keep us updated! Cleaning these numbers make me
Like
Old 05-29-2005 | 04:48 PM
  #104  
erok72's Avatar
erok72
Team Anthracite Member
 
Joined: May 2005
Posts: 201
Likes: 1
From: So. Cal. via RI
I want one but need it for A/T.
Looks like I'm waiting 'till June to find out about availability and pricing.

But I absolutely, 100% have to have one!!!!!! They are very subtle, but stand out at the same time (if that makes any sense at all). Really classy and clean looking. Much nicer than any of the aftermarket shift knobs I've been looking at (MOMO, Sparco, etc.).

I want to be one of the first to get one!!!!!!
Please keep us A/T owners updated on pricing and availability!!!!

Like
Old 05-29-2005 | 08:04 PM
  #105  
Beelzebub's Avatar
Beelzebub
Race Director
 
Joined: Jan 2003
Posts: 10,693
Likes: 970
From: Long Island, NY
Nice.

I want one when they become available.
Like
Old 05-30-2005 | 10:02 PM
  #106  
98EXL's Avatar
98EXL
98EXL, v2.0.1.33
 
Joined: Oct 2004
Posts: 113
Likes: 0
From: Maryland
I'd like one with '98EXL' on it for my M/T Accord...these look nice
Like
Old 05-31-2005 | 04:03 AM
  #107  
implicit's Avatar
implicit
eh
 
Joined: Jun 2003
Posts: 355
Likes: 0
From: Vancouver, Canada
One more sale here for my 03 6spd when they're ready
Like
Old 06-01-2005 | 09:46 PM
  #108  
nicholbr's Avatar
nicholbr
Suzuka Master
 
Joined: Aug 2003
Posts: 5,442
Likes: 0
i'm in, 99 2.3 5 speed, sign me up, i'm good for it.

i'm excited
Like
Old 06-02-2005 | 01:26 PM
  #109  
LurchRSX's Avatar
LurchRSX
Instructor
 
Joined: Jul 2003
Posts: 241
Likes: 0
From: Toronto
<<<<<
Can I get my logo ?
Like
Old 06-02-2005 | 01:32 PM
  #110  
Dan Martin's Avatar
Dan Martin
Thread Starter
Photography Nerd
 
Joined: Sep 2003
Posts: 21,489
Likes: 11
From: Toronto
Like
Old 06-02-2005 | 05:55 PM
  #111  
t_dot_porkchop's Avatar
t_dot_porkchop
Instructor
 
Joined: Oct 2004
Posts: 137
Likes: 0
From: Toronto
dan...are you going to be able to keep up with this demand? lol
Like
Old 06-03-2005 | 03:49 PM
  #112  
Dan Martin's Avatar
Dan Martin
Thread Starter
Photography Nerd
 
Joined: Sep 2003
Posts: 21,489
Likes: 11
From: Toronto
Just a quick update on the AT knobs...
Today I made excellent progress with the design and I anticipate the AT knobs to be available shortly after the initial release of the MT knobs.
Like
Old 06-03-2005 | 03:54 PM
  #113  
implicit's Avatar
implicit
eh
 
Joined: Jun 2003
Posts: 355
Likes: 0
From: Vancouver, Canada
do you have a release date in mind yet for the manual knobs?
Like
Old 06-03-2005 | 04:09 PM
  #114  
Dan Martin's Avatar
Dan Martin
Thread Starter
Photography Nerd
 
Joined: Sep 2003
Posts: 21,489
Likes: 11
From: Toronto
Originally Posted by implicit
do you have a release date in mind yet for the manual knobs?
It looks like the first orders will likely ship out by the end of the month.
Like
Old 06-04-2005 | 04:32 AM
  #115  
mystikk's Avatar
mystikk
failhard.
 
Joined: May 2004
Posts: 4,546
Likes: 10
From: Alaska
Any update on any kind of shift boot at all too?
Like
Old 06-05-2005 | 05:38 PM
  #116  
gavinn58's Avatar
gavinn58
STi'd
 
Joined: Oct 2003
Posts: 388
Likes: 0
From: Eight-Oh-Eight
Very interested in the shift knob. I'd like one with the gate engraved. Are you able to do it in red just like the factory knob?
Like
Old 06-05-2005 | 06:50 PM
  #117  
implicit's Avatar
implicit
eh
 
Joined: Jun 2003
Posts: 355
Likes: 0
From: Vancouver, Canada
shift gate engraving here too if possible
Like
Old 06-05-2005 | 09:31 PM
  #118  
erok72's Avatar
erok72
Team Anthracite Member
 
Joined: May 2005
Posts: 201
Likes: 1
From: So. Cal. via RI
Dan - Do you have any preliminary pics of the A/T knobs?

You stated earlier that the M/Ts will ship @ the end of the month, so that means the A/T won't be available until at least mid-July?!??!

I don't know if I can hold out that long!!!!
Like
Old 06-08-2005 | 04:41 PM
  #119  
Jon_M's Avatar
Jon_M
Blue on Black
 
Joined: May 2005
Posts: 140
Likes: 0
From: Coquitlam, BC, Canada
Dan,

Count me in for a A/T knob for my 2005 TL (see my avatar). How much are you charging (?Canadian $$). I'm in Vancouver.

Like
Old 06-08-2005 | 04:46 PM
  #120  
Dan Martin's Avatar
Dan Martin
Thread Starter
Photography Nerd
 
Joined: Sep 2003
Posts: 21,489
Likes: 11
From: Toronto
The prototyping of AT knobs is going quite well so they'll be available shortly after the MT is on sale. We haven't announced pricing either for or but we will post that information shortly before they go on sale.
Like



Advanced Search
Quick Reply: Introducing AcuraZine Shift Knobs


Reply Closed Thread Share

All times are GMT -5. The time now is 03:33 PM.