Fitment help-will 19x8.5 w/18mm & 22mm fit?
Hello all. Just need some quick help with wheel fitment on my 2009 TL FWD. Will 19x8.5" with 18mm offset on front and 19x9.5" with 22mm offset on rear fit? I dont want to lower, or roll fenders. Thanks!.....
|
You'd probably need a fender roll still. Thats a very low offset
|
If you are not going to lower the car - they'll "fit". But they're going to stick out quite a way.
The front tire will stick out 33mm more than stock, and the rear will stick out 42mm more. If you don't lower - it's probably going to look pretty bad :2cents: I would stick in the 8-9in wide range and offsets of 45-32 seem to have been used on most people in the 4G forum with positive results. |
ok. I found these great looking wheels, but it sounds like theyre not going to work then. I've been looking at M6 wheels, because a lot of guys here on this site have got me digging them.
http://cgi.ebay.com/ebaymotors/ws/eB...84.m1438.l2649 |
by the way, i just bought my car last week, and i just found this site a few days ago, and im super impressed with the site. it rocks! tons of info, and tons of awesome guys with great looking cars.
|
Welcome! Check out lots of the threads in the Tires, Wheels and Suspension section - there are many people who have gone the aftermarket wheel route, and can give you lots of options.
https://acurazine.com/forums/4g-tl-tires-wheels-suspension-298/unofficial-pictures-aftermarket-rims-4g-tl-thread-768768/ I believe a member here did put some replica m6 wheels on his TL and they looked pretty awesome. |
Pete and Eazy maybe you can help me as well with fitment:
1) will this fit flush with the fender 20 x 8.5, 35 offset. 2) " " 20 x 10, 30 offset; I don't necessarily want 10" wide wheels but I've found a great deal on rims I love so... What offset are you guys running on RJs? |
I just talked to the guy who had the wheels I was looking at, and he said he can special order them in different offsets. Do you guys think front 19x8.5" (with 35mm) and rear 19x9.5" (with 45mm) would work? Thanks again!
|
lol.. im runnin 19x10 +32 offset in the rear.. test fitted and no problem.
eatmypoo, if you get wider rims and tires, make sure to get an alignment. and yes, 19x9.5 +45 would work. |
oh btw, please dont get replica or fake wheels.
|
Originally Posted by potmilkz
(Post 13232115)
lol.. im runnin 19x10 +32 offset in the rear.. test fitted and no problem.
eatmypoo, if you get wider rims and tires, make sure to get an alignment. and yes, 19x9.5 +45 would work. |
And yes, I get that people frown upon me having a staggered setup, and really, I dont want a staggered setup. I dont want to deal with the hassle of buying new tires instead of rotating, but these wheels are damn sweet. http://cgi.ebay.com/ebaymotors/ws/eB...84.m1438.l2649
So I really dont care what Mr Marco says...... Im pretty sure I'm not going to get them anyways, I guess I'm just curious |
Originally Posted by eatmypoo
(Post 13232161)
SO you are curently running this setup with no issues? even with 10" in the rear? What year is your TL, and do you have any pics I can see? Thanks....
not that the moment, i have the rims and have test fitted them already, it fits good, also im lowered. waiting to get camber kits and TPMS sensors in before i put wheels on.. and yes im running staggered. its mostly for show, i dont drive my car much, probably once or twice a week so i dont worry. look at the rears, lol http://img600.imageshack.us/img600/6225/img0447y.jpg btw these are iforged seneka that i picked up with new rears and used front tires for 800 bux.. got a good deal on these |
WOW!!! GOD DAMN those things are super sexy. I love em'. I would love to go staggered, but mines a daily driver.
Ive decided to just go with a 19x8.5 all 4 corners with a 37 offset. I think thats gonna work just fine from what I've read. Do you guys think that will work ok? |
Potmilk do the lips on wheels tend to be fragile? I'd like to get a 20" wheel for the summer: lip+concave, and I'm not sure if I can afford forged so it might be cast...
|
forged over cast. yes, lips do bend if its not strong enough.
you will regret getting cast once you have it. save alittle more, get better wheels. go on bmw forums to look for used forged, local craiglist. etc..there is nothing wrong with used wheels. |
I tried eBay, craigslist briefly and have been doing some research (there's like a million wheel manufactures); I'd like to get forged but they're at least 1k a wheel and anything I like is 1.3k and up a wheel + tax,tire,ship, etc.
|
potmilkz, got any pics of your car? Im digging it from the front, but im curious what the rest of the car looks like?
|
Originally Posted by HeartTLs
(Post 13232486)
I tried eBay, craigslist briefly and have been doing some research (there's like a million wheel manufactures); I'd like to get forged but they're at least 1k a wheel and anything I like is 1.3k and up a wheel + tax,tire,ship, etc.
found some bbs 20" staggered with tires - $1700 (o.b.o queens) BBS model ck 20" bolt pattern is 5x120 8.5front and 9.5 rear they have some scratches but they are new and look great, with new tires pirelli at front and michellin pilot for the rear, http://newyork.craigslist.org/que/pts/2585662277.html sell or trade my 20" rims with tires 2month old concave style - $1500 (perth amboy) I have 20" rims by 9x1/2 wide 40off set 225/35/20tire size streched tires have 99% life bolt battern 5x120 rims fit BMW , they were on a 2005 acura Rl will fit 2010 Acura tl ,2005-up Honda odyesse one rim has little road rash thanks to wife just sold car don't fit my knew truck so priced for quick sell paid 2480 if interested call 732 881-9228 willing to trade for 22'' rims for my fx must be in good condition with tires 5x114 bolt patern let me know what you got http://cnj.craigslist.org/pts/2596483229.html 20" Lexani LSS-5 - $1399 (Jersey Shore) I have a set of 4 Lexani LSS-5 staggered fit for BMW 5, 6 and 7 series 2004-2010 . They come with Hankook Ventus V12 tires. The rims are in MINT condition no scrapes, ding, dents and the tires have about 1000 miles on them. I am asking $1399. For pick up and cash only. Scammers please stay away because I will not respond. Bolt Pattern 5X120 http://jerseyshore.craigslist.org/pts/2491431323.html |
but yea, my goal is to be this flushed. and those are 20's too, imma try to do it with 19's
http://tunedmotiondotcom.files.wordp...02779122_2.jpg http://tunedmotiondotcom.files.wordp...02779122_2.jpg |
F'!! I love those BBS, but it's a staggard setup. Mine is AWD, and in 6 months alone i've driven 12.5k miles. I don't understnad why it's not a probem on audi's, bmw's, etc?
Edit: Those (BBS) would be a summer set for me. |
Originally Posted by HeartTLs
(Post 13233108)
F'!! I love those BBS, but it's a staggard setup. Mine is AWD, and in 6 months alone i've driven 12.5k miles. I don't understnad why it's not a probem on audi's, bmw's, etc?
i dont think stagg will affect AWD system as long as you have the same rolling diameter for all wheels.. meaning that tire size has to be all the same.. |
how am I going to fit the same size tire on a smaller/larger rim? example: will a 235/40/20 fit on front/rear?
Edit: damn 15/22mm offsets, they'll stick way out. Thanks for the link potmilk; I knew it was too good to be true =( |
try here if your ok with online personal transactions..
http://www.e90post.com/forums/forumdisplay.php?f=111 but yea, to bad your not in california, there are a bunch of wheels here for sale. |
Originally Posted by potmilkz
(Post 13232728)
but yea, my goal is to be this flushed. and those are 20's too, imma try to do it with 19's
http://tunedmotiondotcom.files.wordp...02779122_2.jpg http://tunedmotiondotcom.files.wordp...02779122_2.jpg My wheels are 8.5 wide - 20" with a +40 offset. I've been toying with the idea of maybe going down to 19" forged wheels that I can put all seasons on and use all year. Probably lipless wheels so they look just as big as the RJ Legend type II's do with a lip... |
Originally Posted by HeartTLs
(Post 13231917)
Pete and Eazy maybe you can help me as well with fitment:
1) will this fit flush with the fender 20 x 8.5, 35 offset. 2) " " 20 x 10, 30 offset; I don't necessarily want 10" wide wheels but I've found a great deal on rims I love so... What offset are you guys running on RJs? I'm not sure bout 10" wide wheel. I wouldn't go wider than 9" tho |
^^
Thanks, the offsets of the wheels pot linked me to were too aggressive and would stick out too much, I'm going to get some BMW style wheels 20 x 9, 35mm offset. |
remember HeartTLs
you get what you pay for, dont cheap out. tires and rims.. See this guys thread, fake bbs lm almost killed him http://g35driver.com/forums/wheels-t...-ls1-rims.html *WARNING* BE CAREFUL IF YOU ARE LOOKING INTO PURCHASING CHIKARA LS1 RIMS! I lost control of my car because the rims are defective and one of them broke on me! Just thought I'd share my story so some of you guys might not end up in my situation. I was driving in a tunnel and suddenly my car started swerving. I was afraid that one of my tires blew out, but after I finally came to a stop I found that my rim broke on me and separated from my tire. Thank God for the Anti-Slip function on our cars... it helped me control the car with minimal damage & I suprisingly didn't crash into any walls. I tried contacting the company 88Rotors and they haven't taken responsibility. They told me that they haven't seen anything like this happen. I had to replace my rear camber arms and also my rear struts. Rim separated form tire and was still attached to wheel studs: http://www.flickr.com/photos/50746687@N03/5250167010/ This is how my tire ended up: http://www.flickr.com/photos/5074668...n/photostream/ Close up of rim: http://www.flickr.com/photos/5074668...n/photostream/ Rim cracked on the inside: http://www.flickr.com/photos/5074668...n/photostream/ Cracked: http://www.flickr.com/photos/5074668...n/photostream/ *Currenly rolling on some 17" Evo Enkeis LOL... got them for a good deal and in good shape. Hopefully I'll be able to get better rims soon! These don't look so bad on the car... http://flic.kr/p/8ZH66d I'm just glad that I'm safe and that there wasn't too much damage to my car! Sorry couldn't get the images to load so I just added the links |
Originally Posted by HeartTLs
(Post 13235449)
^^
Thanks, the offsets of the wheels pot linked me to were too aggressive and would stick out too much, I'm going to get some BMW style wheels 20 x 9, 35mm offset. |
+1 on the pics
|
Will do, but don't expect them too soon!
|
Yeah, I too am on a budget and might be stuck with some cheap wheels. I might just wait till next sprin when I have more cash and get some nicer wheels.
|
Has anyone ever tried to fit 22's? I just found a set of sweet 22x9.5 with tires for dirt cheap.
|
Yes, I remember seeing a thread long ago. A female member on here (don't recall the name) put 22's on, I believe she lives in Florida; I wouldnt suggest doing that unless the roads are PERFECT in your state.
|
Originally Posted by potmilkz
(Post 13232728)
but yea, my goal is to be this flushed. and those are 20's too, imma try to do it with 19's
http://tunedmotiondotcom.files.wordp...02779122_2.jpg http://tunedmotiondotcom.files.wordp...02779122_2.jpg |
ac schnitzer
|
Which translates to "I'm a fucking baller" in German.
|
All times are GMT -5. The time now is 12:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands