bukjoe15

iTrader: (1)

Do you guys think that i can fit 18x10 +25 all the way around? I know i would have to do some fender rolling, but i have no chamber kits do would that be an issue?

Turbonut

iTrader: (1)

No answer yet, so I'll say no go. That 10" width and +25 offset will move the wheel out @ 1.75" and put it well beyond the fender.

Maybe some of the guys that are well versed in heavy rear camber, stretched tires and fender rolling might have a different opinion, so let's wait and see.

bforbrian

iTrader: (11)

It's very possible. It will require rolling/slight pulling of the rear fender. I'd recommend 235/40-18 all around. Camber kits will work WONDERS.

myron

iTrader: (4)

^ won't that require a lot more then "slight" pulling of the front fenders?

-MiG-

iTrader: (3)

On the rear this will be no problem at all..

In the front you will have to pull, i would LOVE to see this be done, PLEASE DO IT!!!!

Im running 235/35 on my 10.5 on the rear, i'd do 225/35-40 on a 10

bukjoe15

iTrader: (1)

yea i was think of doing 18x10 +25 all around with 225 35 tires all around. Ima try to pull this off with natural camber and just fender rolling. please tlel me how to fender pull at home lol.

MIG - i seen your biology book trick, is that a type of fender pull? Do you have pictures up close?

If this accord can pull it off! def a TL can pull it off, am i correct?
http://zilvia.net/f/wheels-tires/339...-up-socal.html

-MiG-

iTrader: (3)

The book pull in my opinion works awesome because the book actually shapes like the tire, check it out:

http://www.youtube.com/watch?v=1BRBe9joBbA

That dude with the accord is always doing work! lol...

03RSX-S

you can fit anything to anything, the only question is how much money you are willing to throw away doing it