Revolutions

looks like i just made it...about 4mm off no tires yet because i just wanted to test fit, tires go on tomorrow, wheels will be mounted on the car thursday night, tein super street coilovers friday, a-spec kit maybe next week depending on how much i win at the casino...lol

i'll let you guys know what rims when it all comes together

Ka0tik

looks hawt

Revolutions

i had a huge concern about the calipers not clearing since it's +30mm 15mm less than stock, but it's working out...and it's suppose to STICKOUT 15mm more than the stock, but its looking pretty good............more pics tomorrow once the tires are mounted to the rims and i put them on my car.

ACCURATEin

Thats gonna look good.

Nice teaser pics!

aznbo187

iTrader: (1)

Thats super hot. I want to say they look a lot like the Privat Netz, or Maya STM's.

Revolutions

ding ding ding....privat netz...i got them at phat deal.... www.jlbmotorsports.com 951.734.4411 call them up...they gave me a hell of a deal.

subinf

looks good so far, get those tires on there so we can see it in full

LacViet

That's hot! Don't forget to show your car pics when done.

Blitz

That's so dirty. Can't wait to see the new pics.

Fishsriz

you got my wheels and u have 6speed..

Now im getting them for sure.. i was soo scared they wouldnt fit...

what size did you go???

trancemission

the name of the thread is

Preview: 19x8 6 speed with +30mm offset *56k warning*

mrchan625

iTrader: (3)

looks nice but try resizing the pix a lil to big

knighj1

pics were to small unable to view

King of Pain

That's because the wheels are big

King of Pain

Looks like someone has the modding bug really bad.

Revolutions

pics look small to me because i use dual display 17s with a 2560x1024 resolution...

19x8 with +30mm offset with 245/35/19 Falken FK-451 tires (same specs as Toyo T1-R except cheaper by like 50 bucks a tire)...

yeah the modding bug bit me, then threw me up against the wall and forced me to comply, so, i had no choice but to pull out the cash and give in. I was going to buy 19x8.5 Work VS-XX in GOLD, but it's $625 a wheel plus 3 months wait and god forbid if hit a pot hole, i would definately start crying and then fork out more money and wait another 3 months to get a replacement. BUT, definately Work VS-XX will be my next set of wheels, most likely when the tires run wear out on these, i'll sell these and buy JDMMMMMMMMMMMMMMMMMMMMMMMM Hopefully they're ready for me to pick up and they'll go on the car later today

aznbo187

iTrader: (1)

Great taste in wheels. I was also looking at the Vs-xx's before because I really dig the mesh-style wheels. But the bargain for these just eat up the volks. From the pictures, the finish looks very nice, how is it in person? Also, are these the silver, or hyperblack? And last of all, I'm planning to get either the 8.5 or 9inch, do you think I will have an offset problem?

Actually, I got one more question. Whats the size of the lip with those?

Revolutions

finish is very good, it looks expensive! lol. it comes in diamond cut face with a different finish inside the spokes, you can see it from the picture, Dustin & Hikaru @ JLB Motorsports said "the forged grey looks like ass" HAHAHA...so i took their opinion. They don't make 8.5, it's either 8 or 9.5...so i went obviously 19x8 +30mm, +40mm will definately not clear the brembo calipers. the lip is about....2 inches good fit, front sticks out SLIGHTLY more than stock, but what do you expect? it looks great though!

anyways, sorry guys, no pics until tomorrow. it's too dark outside now, i need to eat, and sleep for work tomorrow...HOPEFULLY Tein SS Coilovers coming tomorrow!!!! They'll go on the car saturday morning wooooot!

mr.motoring

The wheel porn is just the right size for my 20" wide 1680x1050.

Revolutions

SORRY! BUT I LIKE BIG DETAILED PICTURES! i hate it when people take pics with their camera phones and post it...

Privat 19x8 +30mm offset all around, Falken FK-451 tires, great tires! no noise! i'll let the pictures speak for themselves now








18% in the front, 5% in the rear...




Special thanks to Dustin & Hikaru @ www.jlbmotorsports.com -- 951.734.4411 -- for all the hook up...rims, tires, lugs/locks, hubcentric rings, and my AEM CAI all in one place. TEIN SUPER STREET COILOVERS LATER TODAY!!! maybe, if not, end of next week.

King of Pain

Lookin good

Drop that ride, add a body kit and you'll be set.

Black_05_TL_6SP

MUD FLAPS!!!!!! You left the mud flaps on the car????!!!!! What where you thinking?? Well, at least when you get the A-spec kit on, you can take the flaps off. That was a close one.

Those rims look really good on the white. I would hate to be the one to clean them though.

Good luck with the upcoming projects and look forward to the pics.

Jason

aznbo187

iTrader: (1)

What is the fingergap you have in the front, and rear at the stock height?

Revolutions

2 finger rear, maybe 3 in the front, gonna be half a finger hopefully this weekend

boomer

19 privat netz on a 6 speed and no spacers?????

boomer

Looks Hot !

Revolutions

no spacers...i was HIGHLY against using spacers and i told JLB that if i have to use spacers i'm not buying them...and they worked it out with me. AWESOME WHEELS! My neighbor that also has a WDP TL was like...dude, did those cost like 3000? HA...more like under $1500! hahaha... they work well because i also bought from JLB hubcentric rings....good stuff call up 951.734.4411 for the best deal on these rims...one place wanted to charge me $150 more for the same setup....

ludachrisvt

iTrader: (2)

SHIT. I am getting these!

How much did you pay total for everything?

Revolutions

they were local to me so i just picked it up...but it's $775 for the wheels, and $620 for tires....tires are Falken FK-451...i'm VERY happy with them, grippy tires, no noise increase...Dustin @ JLB told me that the Falken FK-451s were very simliar to Toyo T1-R, which would have cost me like 200 a tire.

triggle

So what's the difference between hub-centric rings and spacers ? I think they amount to the same thing don't they ?

s2ktaxi

Did you get to weight the wheels and wheel/tire combo?

Revolutions

spacers affect the offset of the tire. if you use a spacer, you're increasing the offset which pushes the mounting surface out...or some shit like that...Dustin sat there for 30 minutes explaining it to me but i think i forgot...lol... stock wheels are 17x8 with a +45 offset...if you got 17x8 with a +50 offset, the wheels will mount 5mm more out towards the fender...i think...LOL

hub centric rings allow the wheels to be mounted centered. if you took off your stock wheel right now, you'll see your 5 wheel studs, and in the center of those studs, you see a circle which is your hub, this hub measures 64.1mm. the CENTER of your wheels rest on this hub. most rims are not hubcentric unless you buy wheels like HRE, iForged, Work Super Wheels etc. These wheels are custom made for your car therefore hub centric rings, JLine are not needed. The Privats are made for many different types of cars, so the hub is a bit bigger. You need a hubcentric ring to place INSIDE the center of the wheel, to make the inner diameter of the hub on the rim 64.1mm which will mount perfectly on the car. You know how people tell you, make sure you tighten your lugs in a star pattern? that's if you don't have hubcentric rims...what you're doing is making your rims lug centric...which isn't bad, but for our TL...she deserves nothing but the best I still do it anyways cuz it's good for the car. RonJon wheels if you like them are all hub-centric as well...hub-centric wheels are VERY important...don't skip out on the 10 bucks and not buy hub-centric rings if the rims you purchase aren't hub-centric.

[QUOTE=s2ktaxi]Did you get to weight the wheels and wheel/tire combo?
negative, i'm gonna do it later today though when i wash my car, so i'll post it sometime tonight.

Revolutions

tein SS coilovers will come sometime this week, and i'll put them on saturday, a-spec kit probalby the week after...then i'll call it a day with the car

triggle

Those wheels look great.

ludachrisvt

iTrader: (2)

local guy quoted me 2100 for this setup

ludachrisvt

iTrader: (2)

Actually that was a deal with the toyos

ptk681

I actually just ordered the same wheels this week with 9.5 in the rear though in gray.....

Revolutions

you can get this same setup i have with toyos for about 250 dollars more...so like 1600-1700

i didn't get a chance to weigh them, i'll weigh them when the coilovers come in and i put them on this weekend.

JUST A FAIR WARNING! MESH WHEELS ARE A PAIN IN THE DONKEY TO CLEAN!

ludachrisvt

iTrader: (2)

looks like I will be getting my setup from these guys! I told them you refered me

ding069

Revolution, how is your clearance of your suspension components on your inside lip? I ordered a set of 8.5" wide with a 32 offset, I am hoping that the extra .5" isn't gonna give me a problem.