shux69

i found them at pep boys. They are dirt cheap, under $90. Will they fit on the TL? I dont know much about wheels but you kind of look cool for the price. Do you guys like them?

niz181

they dont look to bad but be careful u get what u pay for!

BstonBruin

i bet you could find a quality review somewhere on the net it

cM3go

not wide enough... the stock wheel is 17x8, the OEM 18" wheels are 18x8...

Tiffanyonwheels

they're not *BlIng* enough, and you shouldnt buy the wheels just because of the big bargain; you wouldnt know what harm it would create to your tl.

ckya

hmm....it says 4x100/4x114.3.......unless u drill on more hole on the rim, i dun think u can mount it...XD

t-dogg

a wheel as cheap as that would probably buckle driving over a pothole...

3PUTT

from experience, sometimes, the cheaper ones are the ones that are sturdier...
i am currently trying the forged route. this is why i got the SSRs.

as far as the wheel pictured above, the comments about the bolt pattern is correct. the TL needs a 5x114.3. the boxes show that the wheels only have 4 holes. even if it was the right bolt pattern, i also think that the wheel is not wide enough...

ed99

Dam that is cheap!!! Not bad looken wheel but 7.5 is too thin. Should go no less than 8inch width.

PeterUbers

iTrader: (1)

You absolutely DO get what you pay for w/ wheels -- especially at PEPBOYS!!!

Don't waste your money -- I agree, they are too narrow .. you need minimum 8" wide rims. Plus, I dunno. they dn't look that nice.

shux69

thx for the info guys. I am going to hold off on the wheels for now