Is 25mm spacer too much for stock?
#42
Former Whyner
hey guys. I recently purchased a pair of 20mm spacers from MAS(an Azine member). I put them on the rear and they looks great with my stockies. The wheels sit very far out, with a drop they would look perfect. Unfortunately i cannot afford to drop my car due to the design of my driveway. These Ichiba V2 spacers are very light in weight and seem very sturdy. Here are the pics:
Btw very goon info here guys thanks
#45
Racer
ok now that I am on stock 17" wheels I want to do this.. Plus I am close to slammed right now..
So this is the ideal setup?
Ichiba Hubcentric spacers:
- Front - 15mm
- Rear - 20mm
MAS you didnt have to touch your factory studs right? The wheels with the spacers cleared the factory studs no problem? According to the previous posts it looks like they did.. Just want to make sure before I look for this stuff..
btw: CJ0920 your car is SICK murdered out.. if I had black I would do the same thing? You gonna tint your signals on your mirrors? rims look great also!
So this is the ideal setup?
Ichiba Hubcentric spacers:
- Front - 15mm
- Rear - 20mm
MAS you didnt have to touch your factory studs right? The wheels with the spacers cleared the factory studs no problem? According to the previous posts it looks like they did.. Just want to make sure before I look for this stuff..
btw: CJ0920 your car is SICK murdered out.. if I had black I would do the same thing? You gonna tint your signals on your mirrors? rims look great also!
Thanks, I was actually going to tint them, but now I'm getting ready for NJ state inspection Headlight tints will be removed, and I have some new wheels.
#46
Racer
iTrader: (1)
Join Date: May 2008
Location: Michigan
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
^^^^Would this be the same for the 18x8 aspecs? I am looking at picking up a set of aspecs (non gunmetal) and would like them to sit out little more...around 5-15mm, but nothing too drastic. I have aspec kit and suspension and don't plan to go any lower. I currently have a set of 18" RJ inspyres and really like the more flush look compared to the oem wheels.
#50
4th Gear
Join Date: Oct 2008
Location: Lynnwood, WA.
Age: 53
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys im about 2 buy some spacers 4 the rears, I know 20mm is said 2 be idea but has anyone hear tried 25mm in the back would it b 2 much? I'm running 18x8 aspecs. I'm lowered on comptec springs right now but getting coilovers by summertime, appreciate any info I can get
#51
Area on my XM
Ahhh... The thread I was looking for before I started an another unnecessary one on the same topic. Looks like 20mm spacers should work on a car dropped with Tein S-Techs without any fender rolling involved. Question answered! Thanks myron for the heads up!
#52
Burning Brakes
ok now that I am on stock 17" wheels I want to do this.. Plus I am close to slammed right now..
So this is the ideal setup?
Ichiba Hubcentric spacers:
- Front - 15mm
- Rear - 20mm
MAS you didnt have to touch your factory studs right? The wheels with the spacers cleared the factory studs no problem? According to the previous posts it looks like they did.. Just want to make sure before I look for this stuff..
btw: CJ0920 your car is SICK murdered out.. if I had black I would do the same thing? You gonna tint your signals on your mirrors? rims look great also!
So this is the ideal setup?
Ichiba Hubcentric spacers:
- Front - 15mm
- Rear - 20mm
MAS you didnt have to touch your factory studs right? The wheels with the spacers cleared the factory studs no problem? According to the previous posts it looks like they did.. Just want to make sure before I look for this stuff..
btw: CJ0920 your car is SICK murdered out.. if I had black I would do the same thing? You gonna tint your signals on your mirrors? rims look great also!
#53
Drifting
iTrader: (10)
Not yet because I have had other stuff come up that were good deals and wanted to get those parts first before tackling this project. I may also be swapping out my stock 5 spokes for a set of type s wheels. Just want to see what that looks like without spacers first.. my car is going through a total revision right now.. from bling blang -> STOCK lol..
#54
Intermediate
1.5" lower needs 25mm to flush and stock height needs 20mm to flush?
#56
Area on my XM
The following users liked this post:
BxTrini_TL (11-01-2013)
The following users liked this post:
BxTrini_TL (11-01-2013)
#60
Hey guys, well here's my situation: as of right now I'm pretty much slammed on HT type 2 coilovers and my wheels are 18x8 +42. I will be ordering 15mm spacers for both front/rear to bring the offsets down to +27. Is it possible to pull it off being slammed with 15mm spacers on my wheels without rolling my fenders? Worst thing is that I would have to raise the car up a bit higher if I need to get the fenders rolled. Oh & I'm on 215/40/18 tires btw, just slightly stretched. Any answers & or inputs would be greatly appreciated, thanks .
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
07-16-2017 07:33 AM