1qwik6

iTrader: (1)

what offset are you running in the rear on a 19x10? and what size tire 235 or 245. rear fenders are rolled but not pulled. i would like to keep it that way also.

RU_JELLY

iTrader: (1)

most people ive seen run 19x10 are running a 15-25 offset, and more than likely a 245 tire. but if you go with low offset you will probably need to do a pull. I had to pull for my 18x9.5 +12

SSM4DR

iTrader: (1)

Without a pull, you'll need something in the higher or like stock offset. I rolled & slightly pulled mines. 19X10 +38 with 235/35/19.

Italiano

Right now my rear is a 19x10 et 38...fenders rolled and a 245/35 tire...runnin 2.5 degrees of camber...pulling is not nessasary...also I'm 2.5 inches dropped:-)

TL^

I was running 19x10.5 et22 with a 235/35 tire and fenders were rolled.. No camber kit, no pulling.

jwr0ng626

iTrader: (1)

19x10 + 44 front and + 22 rear with something like 265/30

SSM4DR

iTrader: (1)

So 19x10 +38 with 235/35/19 tires will also work too right for the front?

OP sorry, had to ask that question

Italiano

^in my opinion,a 19 x10 is too wide for the front..u would have to roll and pull yor fenders for a et38 on a 10inch whee for the front

SSM4DR

iTrader: (1)

Mines are already rolled and slightly pulled. I'm having that itch to do a square set up with 19x10's lol.

Italiano

U would have to stretch major tire as well....why not just stick with a 9.5 and a lower offset..just sayin.....

04 tl

I ran a 18x10+24 offset with a 235/35 no pull fitment was perfect

Italiano

That won't work with 19's and tucking tire^^^major rubbing would be goin on....would need a 225 series tire and fender work..unless ur not dropped that much....

SSM4DR

iTrader: (1)

Thanks for stating your opinion . I still got some things to pick up before I can start test fitting. For sure I will need the Skunk 2 pro front camber kits.

Italiano

That's funny,I ordered that same kit a week ago..but I selected the hellaflush option for my new set up...want do dial in some camber for my wheels to fit...9.5 wide also

jwr0ng626

iTrader: (1)

im not sure, maybe try putting ur rears in the front and see how they fit? lol I want to do that for my S also because I want a square... but i'm too lazy

I'm just basing my opinion off this guy:


from here: https://acurazine.com/forums/3g-tl-photograph-gallery-96/new-wheels-19x10s-265s-all-around-white-guy-setup-829705/

SSM4DR

iTrader: (1)

Yeah, I hear you on wanting a square set-up. I may just go on ahead and pick up another pair of the same wheels in 19x10 +38 whenever I have the funds & make it work. That along with the Skunk 2 pro front camber kits (hellaflush ones). I will also run 235/35/19 on them so I can rotate them . My fenders are already rolled & slightly pulled also.