Clean_CL-S

I am looking to purchase a set of Varrstoen wheels with the following specs

Front Size : 19x9.5 (225/35/19) Front Offset : +22
Rear Size : 19x10.5 (235/35/19) Rear Offset : +22

Currently, I am lowered on HT Spec Coilovers and know I will obviously need to roll my fenders.

My question is I am not looking to do any serious fender work/pulling.

I see that members have run these specs with minimal issues or modification.

Chime in on let me know if this setup will work with much modification?

rhafikjaan

Roll your fenders all around. Pull rears and run some camber

Clean_CL-S

Will need to install a camber kit because currently i don't have one. Will rolling them provide enough pull? I am trying to avoid any heavy fender work.

Clean_CL-S

bump

Clean_CL-S

up

03type_s6speed

I would go with the 9.5's all the way around. I'm getting same rim in 18x9.5 +12 235/40 tires. You will have to run camber & roll fenders based of my "research".

Clean_CL-S

I went ahead and ordered the above specs, we will see what happens.

If anyone has any pics of a 3G with the specs above feel free to post them along with wheel/tire specs. I've seen few through searching, but doesn't hurt to see a few more.

03type_s6speed

TL^ has a few pictures in the BM --> https://acurazine.com/forums/car-parts-sale-361/19-varrstoen-2-2-1-x9-5-10-5-22-a-841868/

PM me with details and pictures of your install/ fitment. Since Im getting pretty much the same setup as you.

Clean_CL-S

Will do! Yea I've seen @TL^ setup. Only difference is the tire size. In the front he is running a 225/40 series tire and I plan on running 225/35 series tire. In the rear he is running 245/40 and I plan on running 235/35. I went with the Falken 452s because I heard they run kinda wide. So, I expect a stretch but I didn't want to go too crazy on the stretch in the rear

03type_s6speed

Sounds like your one your way *thumbs up*

Just dont forget to PM me lol