Wipers not fully swinging all the time..?
#1
Burning Brakes
Thread Starter
![Question](https://acurazine.com/forums/images/icons/icon5.gif)
Hi All. I've noticed over the last week or so that my PIAA beam blades are not always traveling fully and not always parking fully; they are sometimes up to 2 inches off of the full throw of the wipers. Of course, this is on a fully cleaned and wet windshield.
If I pull the stick in hard to manually wipe the windshield (this makes it go full speed), it has a much better chance of making the full sweep of the window (though I think it sometimes goes too far then and bangs).
When the blades are parked, I can easily move the top tip of both blades simultaneously in and arc of about 3 inches - that is how much play I have.
I don't remember what the normal play should be. Since both blades move at the same time, the splines aren't an issue.
Could the linkage assembly be worn or is the motor tired?
If I pull the stick in hard to manually wipe the windshield (this makes it go full speed), it has a much better chance of making the full sweep of the window (though I think it sometimes goes too far then and bangs).
When the blades are parked, I can easily move the top tip of both blades simultaneously in and arc of about 3 inches - that is how much play I have.
I don't remember what the normal play should be. Since both blades move at the same time, the splines aren't an issue.
Could the linkage assembly be worn or is the motor tired?
Thread
Thread Starter
Forum
Replies
Last Post
SidhuSaaB
3G TL Problems & Fixes
18
05-30-2020 12:40 AM
mlody
5G TLX (2015-2020)
85
12-04-2019 02:11 PM
Yumcha
Automotive News
1
09-25-2015 06:14 PM